INSTALLATION GP 3V6527 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     189-0411     Shackle     2    
B     138-7575     Link Bracket     1    Note: The seat was removed for photographic reasons.
Illustration 1 g00784868
Install seals (15), (16), (17), and (18) .
Illustration 2 g00783654
Install Tooling (A) and (B) to cab (7). Use chains and a suitable lifting device in order to install the cab in the original location. The weight of the cab is approximately 363 kg (800 lb).
Illustration 3 g00782803
Illustration 4 g00782695
Install the washers and bolts (6) on both sides of cab (7). Install the washers and bolts (8) on both sides of the cab.
Illustration 5 g00828918
Install the washers and bolts (5) .
Illustration 6 g00783642
Connect hose assemblies (13) and wiring harness (14) to the window washer reservoir.
Illustration 7 g00783626
Connect wiring harness (12) .
Illustration 8 g00828919
Install the washers and bolts (11) to instrument panel (9) .
Illustration 9 g00828923
Lift instrument panel (9) into position. Install the washers and bolts (10) (not shown). Install bolts (19) .
Illustration 10 g00782686
Place console covers (3) in place on both sides of the machine and install screws (4) .
Illustration 11 g00782671
Place both armrests (1) in position and install bolts (2) .End By: Install the rollover protective structure (ROPS). Refer to Disassembly and Assembly, "Rollover Protective Structure (ROPS) - Remove and Install" for the correct procedure.