INSTALLATION AR-ENG & CEM MOD 4540626 - Caterpillar

Disassembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     9S-6363     Turbocharger Fixture Group     1    Start By:
Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00517570
Install the turbocharger onto Tool (A) .
Apply alignment marks to the two housings and the cartridge assembly for correct alignment during assembly.
Loosen clamp (3) and remove compressor housing (4) from cartridge assembly (2) .
Loosen the remaining clamp on turbine housing (1) and remove cartridge assembly (2) from the turbine housing.