INSTALLATION GP-CONTROLS 8V2509 - Caterpillar

1. Remove strap (1) from the cab door and the cab. 2. Slide the window open and fasten strap (2) and a hoist to cab door (3). 3. Remove pin (5) from pin (4), lift the cab door clear of pins (4) and remove the door from the machine. The weight of the cab door is 50 kg (110 lb.).Install Cab Door
1. Fasten strap (1) and a hoist to cab door (2) and put it in position. Make sure pins (3) are installed in the hinges of the cab. 2. Install pin (5) in upper pin (4) to hold the cab door in position. 3. Install strap (6) to the cab and the cab door. Adjust strap (6) to get an opening of 1320 mm (52 in.) measured from the edge of the cab door at the latch to the cab door seal lip of the cab.