INSTALLER-SEAL 1373483 - Caterpillar

Removal Procedure
Start By:a. Remove the engine hood.b. Remove the turbocharger.
Illustration 1 g02177953
Remove bolts (5).
Remove bolts (1) and plate assembly (2).
Remove bolts (4) and plate assembly (3).
Illustration 2 g03856548
Remove pipe assembly (6).
Illustration 3 g03856895
Remove plate assembly (7).
Illustration 4 g03856909
Remove bolts (8).
Illustration 5 g06037272
Remove cover assembly (9) and cover assembly (10).
Illustration 6 g03856914
Disconnect hoses (12) and (13) and reposition. Disconnect plate (11).
Illustration 7 g03856973
Remove bolts (14) and reposition bracket (15).
Illustration 8 g03856934
Loosen bolts (16).
Attach a suitable lifting device to engine (17) to support the rear of the engine. The weight of engine (17) is approximately 816 kg (1800 lb). Apply a slight lifting tension to engine (17).
Illustration 9 g03856992
Remove bolt (16), hard washer (21), and washer (22). Remove bolts (18), hard washer (19), rear bracket (20), and rubber mount (23). Repeat for the opposite side.Installation Procedure
Install engine rear mount (20) in the reverse order of removal.
Tighten bolts (16) to a torque of 900 100 N m (664 74 lb ft).