INSTALLER AS-DUO-CONE SEAL 1U6434 - Caterpillar

1U6434 INSTALLER AS-DUO-CONE SEAL Caterpillar parts 5230

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1U6434
1U-6434
1U6434

Caterpillar 1U6434 INSTALLER AS-DUO-CONE SEAL

Weight: 1 pounds 0 kg.

Buy INSTALLER AS-DUO-CONE SEAL 1U6434 Caterpillar genuine, new aftermarket tractor parts with delivery
MINING EXCAVATOR,

Show more prices Caterpillar parts

Compatible equipment models: 1U6434:

MINING EXCAVATOR 5230 Caterpillar

Number on catalog scheme:

Caterpillar 1U6434 Parts scheme INSTALLER AS-DUO-CONE SEAL

For full view, you need register

Information:

Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Compressor housing must go straight on the turbocharger assembly without tilting. Tilting may cause compressor blade to tip, or the compressor shaft can be damaged.
Put an alignment mark on the new turbocharger cartridge in the same location as the old turbocharger cartridge.
Illustration 1 g01117411
Install the O-ring seals on cartridge (4) . Align the marks and connect compressor housing (6) to turbocharger cartridge (4) . Install bolts (5) and tighten to a torque of 40 2 N m (30 1 lb ft).
Rotate the turbocharger cartridge in order to ensure that the turbocharger cartridge does not contact the compressor housing.
Align the marks and connect turbine housing (1) onto turbocharger cartridge (4) . Install clamp plate (2) and bolts (3) . Tighten bolts (3) to a torque of 40 2 N m (30 1 lb ft).
Rotate the turbocharger cartridge in order to ensure that the turbocharger cartridge does not contact the turbine housing.End By: Install the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Install".