INSTALLER AS- 1U8699 - Caterpillar

Open door (1).
Illustration 2 g06204019
Disconnect hose assemblies (2) from pilot valve (3).
Illustration 3 g06204021
Disconnect harness assembly (4). Remove the harness assembly from the clip.
Remove left travel pressure switch (5).
Illustration 4 g06204022
Remove hydraulic connectors (6) from pilot valve (3).
Remove hydraulic connectors (7) from pilot valve (3).
Remove the O-ring seals from the connectors.
Illustration 5 g06204025
Remove floor mat (8).
Remove rubber pedal (9).
Remove rubber pedal (10).
Illustration 6 g06204028
Remove bolts (13) to remove left travel pedal (11).
Remove bolts (14) to remove right travel pedal (12).
Illustration 7 g06204030
Remove boots (15).
Illustration 8 g06204032
Remove bolts (16). Remove pilot valve (3).
Remove pilot valve (3).Installation Procedure
Illustration 9 g06204032
Position pilot valve (3).
Install bolts (16).
Illustration 10 g06204030
Install boots (15) on pilot valve (3).
Illustration 11 g06204028
Position right travel pedal (12) and install bolts (14).
Position left travel pedal (11) and install bolts (13).
Illustration 12 g06204025
Install rubber pedal (10).
Install rubber pedal (9).
Install floor mat (8).
Illustration 13 g06204022
Install O-ring seals into the connectors.
Install hydraulic connectors (7) from pilot valve (3).
Install hydraulic connectors (6) from pilot valve (3).
Illustration 14 g06204021
Install left travel pressure switch (5).
Install the harness assembly from the clip. Connect harness assembly (4).
Illustration 15 g06204019
Connect hose assemblies (2) onto pilot valve (3).
Illustration 16 g06204015
Close door (1).