INSTALLER- 4C4069 - Caterpillar

Remove bolts (14) and shield (10).
Illustration 11 g06084443
Disconnect ground strap (15).
Illustration 12 g06084446
Disconnect hoses (16).
Illustration 13 g06084452
Disconnect battery cable assembly (19). Remove nut (17) and cover (18).
Illustration 14 g06084456
Cut cable strap (20). Remove nut (22) (not shown). Reposition harness assembly (21) out of the way.
Illustration 15 g06084465
Remove nuts (23) (not shown). Disconnect harness assemblies (24).
Illustration 16 g06084472
Disconnect hose (25). Disconnect hose assemblies (26).
Illustration 17 g06084475
Disconnect hose assembly (27).
Illustration 18 g06084478
Disconnect hose assemblies (28).
Illustration 19 g06084482
Disconnect hose assembly (29).
Illustration 20 g06084486
Typical example.
Attach Tooling (A) and a suitable lifting device to engine (30). The weight of engine (30) is approximately 1134 kg (2500 lb).
Illustration 21 g06084489
Attach Tooling (B) to transmission (31) and to a suitable crossbar to support transmission (31). The weight of transmission (31) is approximately 940 kg (2072 lb).
Remove bolts (32).
Illustration 22 g06084490
Remove bolt (33).
Illustration 23 g06084492
Remove bolt (34).
Illustration 24 g06084486
Typical example.
Use Tooling (A) and the suitable lifting device to remove engine (30).Installation Procedure
Install engine (30) in the reverse order of removal.
Tighten bolts (33) and (34) to a torque of 900 100 N m (664 74 lb ft).
Tighten nuts (23) to a torque of 5 to 7.5 N m (44 to 66 lb in).
Tighten the nut for ground straps (15) to a torque of 31 4 N m (274 35 lb in).