3C8103 INSTRUMENT Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8103
3C-8103
3C8103
CA3C8103
3C-8103
3C8103
Weight: 0.90 pounds 0 kg.
For full view, you need register
Information:
Engines:
3126E (S/N: HEP1-UP)
Troubleshooting, SENR9637, "Injection Actuation Pressure - Test". Update the above service manual with the following information.Add the following notes and text to Step C. in Test Step 5. Check the Oil Pressure at the Pump (Deadhead Test) and in Test Step 12. Check the Oil Pressure at the Pump (Deadhead Test):Note: There must be a continuous electrical connection between the ECM and the unit injector hydraulic pump. The improper connection or the incomplete connection of the adapter cable may provide incorrect results.C. Connect a multimeter that is capable of measuring current that is 0 to 1,000 milliamperes in series with the adapter cable. Select the lowest current range for the multimeter that is greater than one amp.Note: If the multimeter is not set to the correct scale, the following measurement may provide misleading results.
3126E (S/N: HEP1-UP)
Troubleshooting, SENR9637, "Injection Actuation Pressure - Test". Update the above service manual with the following information.Add the following notes and text to Step C. in Test Step 5. Check the Oil Pressure at the Pump (Deadhead Test) and in Test Step 12. Check the Oil Pressure at the Pump (Deadhead Test):Note: There must be a continuous electrical connection between the ECM and the unit injector hydraulic pump. The improper connection or the incomplete connection of the adapter cable may provide incorrect results.C. Connect a multimeter that is capable of measuring current that is 0 to 1,000 milliamperes in series with the adapter cable. Select the lowest current range for the multimeter that is greater than one amp.Note: If the multimeter is not set to the correct scale, the following measurement may provide misleading results.