INSULATION 1467005 - Caterpillar

1467005 INSULATION Caterpillar parts 307B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1467005
146-7005
1467005

Weight: 0.34 pounds 0 kg.

Buy INSULATION 1467005 Caterpillar genuine, new aftermarket tractor parts with delivery
MINI HYD EXCAVATOR,

Compatible equipment models: 1467005:

MINI HYD EXCAVATOR 307B Caterpillar

Number on catalog scheme: 6

Caterpillar 1467005 Parts scheme INSULATION

For full view, you need register

Information:

Rework Procedure
Required Parts
Illustration 1 g06173508Fabricate two steel blocks according to the print above. The blocks should measure 20 mm (0.79 inch) (A) thick, 20 mm (0.79 inch) (B) wide, and 75 mm (2.95 inch) (C) long.Machine Rework
Park the machine on a hard level surface.
Raise machine to service height.
Install leg locks.
Open service door and secure with the latch.
Turn the engine start switch to the OFF position.
Turn the battery disconnect switch to the OFF position. Apply a lockout tag out device.
Illustration 2 g06173550
Location of protection block on the right side of the machine.
Illustration 3 g06173557
Location of protection block on the left side of the machine.
Illustration 4 g06173597
Weld along the soft steel surfaces, as shown.
Note: Outboard weld must not protrude past the side cutter edge to prevent interference with side plates.
Weld one block on the right side of the machine, along the 4 edges, as shown.
Weld one block on the left side of the machine, along the 4 edges, as shown.