INSULATION AS 1478104 - Caterpillar

1478104 INSULATION AS Caterpillar parts 3512B, 3516, PM3516

Price: query

Rating:

Alternative (cross code) number:
CA1478104
147-8104
1478104

Weight: 2 pounds 0 kg.

Buy INSULATION AS 1478104 Caterpillar genuine, new aftermarket tractor parts with delivery
GEN SET ENGINE, POWER MODULE,

Compatible equipment models: 1478104:

GEN SET ENGINE 3512B 3516

POWER MODULE PM3516 Caterpillar

Number on catalog scheme: 6

Caterpillar 1478104 Parts scheme INSULATION AS

For full view, you need register

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

3516 Generator Set Engine 25Z00684-02188

149-3422: INSULATION GP-MUFFLER » SEBP15730803
154-3629: MUFFLER GP » SEBP15730868

3512B Generator Set Engine 8RM00001-UP

153-8168: SUPPRESSION GP-SOUND » SEBP24420189

3516 Generator Set Engine 25Z02189-UP

149-3422: INSULATION GP-MUFFLER » SEBP29550635
154-3629: MUFFLER GP » SEBP29550674

PM3516 Power Module CAC00001-UP

154-3629: MUFFLER GP » SEBP32210155

Information:

Illustration 1 g01161496
When the ripper tip is worn close to the shank, replace the ripper tip. When the shank protector is worn close to the shank, replace the shank protector. If the tip is too blunt, the tip will not penetrate properly.
Raise the ripper. Place blocking under the ripper. Lower the ripper onto the blocking. The ripper should be high enough so that the ripper tip or the shank protector can be removed. Do not place the ripper too high.
If the ripper tip is worn, drive out the pin. Remove the tip and the shank pin retainer.
Clean the shank pin retainer and the pin.
Install the new tip and the retainer.
Install the pin from the opposite side of the retainer.
If the shank protector is worn, drive out the pins. Remove the shank protector.
Clean the pin retainers and the pins.
Install the new shank protector and the retainers.
Install the pins from the opposite side of the retainer.
Raise the ripper and remove the blocking.
Lower the ripper to the ground.