INSULATION GP-MUFFLER 1493422 - Caterpillar

1493422 INSULATION GP-MUFFLER Caterpillar parts 3516

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1493422
149-3422
1493422

Caterpillar 1493422 INSULATION GP-MUFFLER

Buy INSULATION GP-MUFFLER 1493422 Caterpillar genuine, new aftermarket tractor parts with delivery
GEN SET ENGINE,

Compatible equipment models: 1493422:

GEN SET ENGINE 3516 Caterpillar

For full view, you need register

Caterpillar SIS machinery equipment:

Caterpillar SIS

3516 Generator Set Engine 25Z00684-02188 » 149-3422 INSULATION GP-MUFFLER

3516 Generator Set Engine 25Z02189-UP » 149-3422 INSULATION GP-MUFFLER

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1 Start By:
Release the hydraulic system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Illustration 1 g02520937
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g02240674
Remove cover assembly (1) .
Illustration 3 g02240785
Disconnect hose assemblies (4) .
Remove bolts (3) and load control valve (stick cylinder) (2) .Installation Procedure
Install load control valve (stick cylinder) (2) in the reverse order of removal.
Check the hydraulic oil level. Refer to, "Hydraulic System Oil Level - Check".