INSULATION 2466765 - Caterpillar

Illustration 1 g01393557
(1) Lightly lubricate the sealing lip of the seal with the lubricant that is being sealed. (2) Lightly lubricate the sealing lip of the U-cup seal with the lubricant that is being sealed. (3) Lightly lubricate the sealing lip of the lip type seal with the lubricant that is being sealed. (4) Torque for bolt ... 530 70 N m (390 50 lb ft) (A) Outer diameter of new piston over two lands ... 88.40 0.03 mm (3.480 0.001 inch) (B) Bore of new cylinder assembly ... 88.90 0.08 mm (3.500 0.003 inch) (C) Outer diameter of new rod ... 38.050 0.038 mm (1.4980 0.0015 inch) (D) Bore of new head over four lands ... 38.43 0.03 mm (1.513 0.001 inch)Note: Lubricate the threads of the head with 1P-0808 Multipurpose Grease . (5) Torque for head ... 600 130 N m (440 95 lb ft)