INSULATION 3494206 - Caterpillar

Introduction
The Display is an LCD screen that displays information related to the job you are working on. The Display can be used in two modes:
"Setup" mode
"Guidance" modeThis section discusses the operation of the Display in the "Setup" mode. Refer to Operation and Maintenance Manual, "Display Description" for information on the "Guidance" mode.Setup Mode
The Display has menus that let you configure the settings of the AccuGrade - Laser System. These menus are accessed via "Setup" mode.Accessing the "Setup Mode"
To access "Setup" mode, turn the "power/setup" switch to the "information" position.Note: For more information about the "power/setup" switch, refer to Operation and Maintenance Manual, "Display" section.A screen similar to the one shown in Illustration 1 will be shown on the Display.
Illustration 1 g00993399
Configuration menuTable 1 explains the features of the "Configuration" menu that shown in Illustration 1.
Table 1
Configuration Menu Features    
Callout    Feature    Function    
1     Menu heading     Indicates which menu screen is open.    
2     Menu items     Indicates which menu items are available for selection. The menu item that is highlighted has green text and a black background.    
3     Sub-menu icon     Indicates that there is a sub-menu item within the menu item.    
4     Arrow - up/down     Indicates that there is additional information on the page.    Using Setup Mode
Use the steps listed here to access the items in the "Configuration" menu:
Toggle either of "Menu scroll" switches up or down in order to highlight the required menu item.
Press the "OK" (right reset) button to select the highlighted menu item.
After selecting a menu item, toggle either of the "Menu Scroll" switches to scroll up and down through the submenus or to change the highlighted value.Note: If you want to reset a value to the default setting, press both the "OK" (right reset) button and the "Escape" (left reset) button simultaneously.
To exit from a menu item, perform one of the following:
Press the "OK" (right reset) button to accept any changes that you made and to exit the menu item.
Press the "Escape" (left reset) button to abandon any changes that you made. Press the "Escape" (left reset) button again to exit the menu item.
Press the "Escape" (left reset) button to go back one level in the Configuration menu structure.
Turn the "Power/Setup" switch to ON position to exit from the "Configuration" menu.