INSULATION 3904894 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Threaded Rod
M 20 X 2.5 by 18 inch 2
B 140-7742 Sleeve 1 Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01213930
Illustration 2 g01213930
Install Tooling (A) as a guide. Attach Tooling (B) and a suitable lifting device onto travel motor (4). The weight of travel motor assembly (4) is approximately 127 kg (280 lb). Position travel motor assembly (4) and install bolts (3).
Illustration 3 g01213929
Install bolts (2). Connect hose assemblies (1). End By:
Install the counterbalance valve. Refer to Disassembly and Assembly, "Counterbalance Valve (Travel) - Install".