3C8585 INSULATION Caterpillar parts
Alternative (cross code) number:
Weight: 1 pounds 0 kg.
Illustration 1 g01197657
Note: Refer to Systems Operation/Testing and Adjusting for the correct method of inspecting the flywheel. (1) Bolt (2) Ring gear (3) Spring pinThe following instructions should be used during installation of the ring gear:
Install the flywheel ring gear. Face the "part number" on ring gear (2) toward the engine block. The flywheel ring gear must be installed against the shoulder.
Press spring pin (3) into the crankshaft before assembling the flywheel to the crankshaft. Check the distance from the face of the crankshaft to the end of spring pin (3) .Distance ... 11.0 1.0 mm (0.43 0.04 inch)
Tighten bolts (1) that hold the flywheel to the crankshaft.Tighten to the following torque. ... 120 20 N m (90 15 lb ft)