INSULATOR 7I4699 - Caterpillar

Remove lockup clutch piston (49).
Illustration 31 g06020050
Remove bearing (51), race (52) , and retainer (50).
Remove O-ring seals (53).
Illustration 32 g06020052
Use Tooling (B) and a suitable lifting device to remove housing (25) from stator carrier (18).
Illustration 33 g06020060
Remove bolts (54), drive gear (55), and race (56) from housing (25).
Illustration 34 g06020062
Use Tooling (C) and a suitable press to remove stator carrier (18) from inner bearing (57).
Remove O-ring seal (58).
Illustration 35 g06020068
Remove rings (60) from seal ring carrier (61).Note: To prevent damage, do not remove seal ring carrier (61) if it is not necessary.
Remove dowel pin (59) and seal ring carrier (61) from stator carrier (18).
Illustration 36 g06020069
Remove orifice plug (62) from stator carrier (18).
Illustration 37 g06020151
Remove bearing (64), race (65), and retainer (63) from the housing assembly.
Illustration 38 g06020154
Remove converter turbine assembly (66) from housing assembly (26).
Illustration 39 g06020160
Remove bolts (67).
Remove turbine hub (68) from converter turbine (69).
Remove the race from the back of turbine hub (68).
Illustration 40 g06020162
Remove converter turbine (69) from clutch adapter (70).
Illustration 41 g06020166
Remove bearing (72), race (73), and retainer (71) from the housing assembly.
Illustration 42 g06020168
Remove retaining ring (74) from the housing assembly.
Remove clutch plate (75) from the housing assembly.
Illustration 43 g06020173
Remove clutch discs and clutch plates (76).
Remove sleeve bearing (77) from housing assembly (26).
Illustration 44 g06020211
Remove clutch piston (78) from housing assembly (26).
Remove O-ring seals (79) from clutch piston (78).
Illustration 45 g06020183
Turn over housing assembly (26).
Put the housing assembly on suitable blocking.
Remove plugs (80).
Remove O-ring seal (81).
Remove bolts (82).
Remove cover (83).