IRON SPROCKE 0784818 - Caterpillar

Illustration 1 g01624590
Front left view (1) Position the top cover so that the neutralizer switch is 12 5 degrees from the centerline of the cab. (2) Apply 157-7228 Adhesive in the groove of the bottom cover. (3) As required, use 1K-0502 Washer in order to allow a maximum gap of 1.2 mm (0.05 inch): Quantity ... 10 Thickness of one washer ... 1.2 mm (0.05 inch) (4) Torque for two screws ... 1.50 0.25 N m (13 2 lb in) (5) Torque for the jam nut ... 40 5 N m (30 4 lb ft) (6) Torque for the locknut ... 25 2 N m (18 1 lb ft) (7) Torque for six nuts ... 20 5 N m (15 4 lb ft) (8) Torque for two locknuts ... 30 7 N m (22 5 lb ft) (9) Torque for two screws ... 30 7 N m (22 5 lb ft) (10) Torque for the locknut ... 25 5 N m (18 4 lb ft)