7550375 ISOLATOR Caterpillar parts
FB221
Rating:
Alternative (cross code) number:
CA7550375
755-0375
7550375
CA7550375
755-0375
7550375
TRACK FELLER BUNCHER,
Compatible equipment models: 7550375:
Number on catalog scheme:
75
For full view, you need register
Information:
Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g00862265
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seal (8) on plug (7).
Install socket setscrew (1) to the original position. Tighten nut (2) to a torque of 16 1 N m (12 1 lb ft).
Install O-ring seal (4).
Install poppet (9), spool (6), spring (5) and cartridge (3). End By:
Install the pilot relief valve. Refer to Disassembly and Assembly, "Relief Valve (Pilot) - Install".
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g00862265
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install O-ring seal (8) on plug (7).
Install socket setscrew (1) to the original position. Tighten nut (2) to a torque of 16 1 N m (12 1 lb ft).
Install O-ring seal (4).
Install poppet (9), spool (6), spring (5) and cartridge (3). End By:
Install the pilot relief valve. Refer to Disassembly and Assembly, "Relief Valve (Pilot) - Install".
Caterpillar parts catalog:
Parts isolator Caterpillar catalog:
3577993
ISOLATOR
2470C, 2570C, 2670C, 2864C, 553C, 563C, 573C, 586C
2470C, 2570C, 2670C, 2864C, 553C, 563C, 573C, 586C
1117172
ISOLATOR
CB-534
CB-534
2955253
ISOLATOR GP-ELECTRICAL
AD45B, AD55B, AD60
AD45B, AD55B, AD60
3511201
ISOLATOR AS
AD45B, AD55B, AD60
AD45B, AD55B, AD60
3209250
ISOLATOR-MOUNTING
CB-334D, CB-334E, CB-335D, CB-34
CB-334D, CB-334E, CB-335D, CB-34
3173214
ISOLATOR
Caterpillar
Caterpillar
3033844
ISOLATOR
Caterpillar
Caterpillar
2653539
ISOLATOR
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, M330D
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, M330D
BH150, CVP16, VVP25
2072305
ISOLATOR
CVP16, VVP25
CVP16, VVP25
2055888
ISOLATOR
CVP16, VVP25
CVP16, VVP25