JAW GP-SHEAR 1696009 - Caterpillar

Illustration 1 g00545614
Torque for all 1/4 inch (jam nuts) on cable assembly that hold the rod ends in place ... 8 2 N m (6 1.5 lb ft)Torque for all 5/8 inch locknuts (jam nuts) that fasten the cable assemblies to covers (18) and (23) ... 38 7 N m (28 5 lb ft) (1) See "Steering and Transmission Hand Control" for adjustment procedures. (2) Torque for nut (3) that holds cable assembly (2) to the control valve ... 38 7 N m (28 5 lb ft)Length of cable assembly (2) ... 654 4 mm (25.7 0.16 inch)Parking Brake Adjustment Procedure
Illustration 2 g00546401
(8) Torque for nut that holds cable (2) to cover (9) ... 38 7 N m (28 5.1629 lb ft) (5) Dimension ... 25 mm (1.0 inch) (13) Dimension ... 12 2 mm (0.47 .08 inch) (14) Dimension ... 16 2 mm (0.63 .08 inch)
Engage the parking brake lever.
Install rod end (6) to rod (4) to dimension (5) in view ( A-A) .
Install rod end (12) to lever (11) .
Install cable assembly (2) to rod end (12) to dimension (13) in view (D-D) .
Install cover (9) to housing (10). Install nut (8) on cable assembly (2) to dimension (14) in view (D-D).
Install cable assembly (2) to the control valve.
Put the lever (7) in the DOWN position. Make an adjustment to the rod end (6) so that free fit of the pin assembly is possible. (18) Dimension ... 12 2 mm (0.47 .08 inch) (19) Dimension ... 12 2 mm (0.47 .08)
Illustration 3 g00546604
Assembly Procedure for Forward and Reverse Cable
Engage the parking brake.
At the transmission, move the direction selector spool to the NEUTRAL position (middle detent).
Install cable assembly (16) to dimension (19) in view (B-B) .
Make an adjustment to the cable (16) so that free fit of pin assembly (20) is possible.To adjust the cable, remove the bolts that hold cover (17) to the housing. Loosen the locknut on cable (16). As required, turn the cover (17) . Procedure for Assembly of Speed Control Cable
Install cable (15) to dimension (18) in view (B-B) .
Move the speed selector spool to the SECOND GEAR position (middle detent).
Align the white mark on high speed handle (23) with the number "2" on the speed gear collar and adjust cable assembly (15) .To adjust the cable assembly (15), remove the bolts that hold cover (22) to the transmission housing. Loosen the locknut on cable (15). As required, turn cover (22) .