AVSPARE.COM
parts catalog

JAW AS 3220057 - Caterpillar



3220057 JAW AS Caterpillar parts MP15, VT30 JAW
Rating:
67
Alternative (cross code) number:
CA3220057
322-0057
3220057
Caterpillar 3220057 JAW AS

Buy JAW AS 3220057 Caterpillar genuine, new aftermarket tractor parts with delivery
MULTI PROCESSOR JAW, MULTI PROCESSOR JAWS,

Compatible equipment models: 3220057:

MULTI PROCESSOR JAW  MP15  
MULTI PROCESSOR JAWS  VT30   Caterpillar
Number on catalog scheme: 16
 
  For full view, you need register

Information:

Jacket Water
Illustration 1 g00290887
Cooling system schematic (1) Cylinder block (2) Engine oil cooler (3) Regulator housing (4) Jacket water pump (5) Radiator (6) Bearing housing for the turbocharger (7) Power train oil cooler (8) Brake oil coolerCoolant flows into jacket water pump (4) through an elbow that is connected to the source of jacket water coolant (5). The coolant flow splits and part of the coolant is sent through engine oil cooler (2) .The coolant flows upward through the water jackets. The coolant flows around the cylinder liners from the bottom to the top. The water jacket is smaller near the top of the cylinder liners. The hottest temperature is near the top of the cylinder liners. This shelf causes the coolant to flow faster for better liner cooling. Coolant from the top of the liners goes into the cylinder head which sends the coolant around the parts which have the hottest temperature. Coolant then goes to the top of the cylinder head. Coolant flows through an elbow to a water manifold at each bank of cylinders. Coolant goes through the manifold to regulator housing (3) .Regulator housing (3) has an upper flow section and a lower flow section. The regulator housing uses four temperature regulators. The sensing bulbs of the four temperature regulators are in the coolant in the lower section of the housing. Before the regulators open, cold coolant is sent through the bypass line. This coolant is sent back to the inlet of jacket water pump (4). As the temperature of the coolant increases, the regulators start to open and coolant flow in the bypass line is restricted. All coolant is sent through the outlets to jacket water coolant (5). Also, coolant flows from the upper regulator housing (3) to the bearing housing for the turbocharger (6). The coolant is then returned to radiator (5) .

Caterpillar parts catalog:

Caterpillar parts catalog
MP15, MP20, MP30 & MP40 Multi-Processor Jaws JMW00001-UP (MACHINE)
VT-30, VT-40, VT-50 & VT-60 Multi-Processor Jaws ZYW00001-UP (MACHINE)


Parts jaw Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.