parts catalog

JAW AS 3236110 - Caterpillar

3236110 JAW AS Caterpillar parts MP15, VT30 JAW
Alternative (cross code) number:
Caterpillar 3236110 JAW AS
Weight: 981 pounds 444 kg.

Buy JAW AS 3236110 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 3236110:

Number on catalog scheme: 23
  For full view, you need register


Illustration 1 g01188937
Air Inlet And Exhaust System (1) Exhaust manifold (2) Aftercooler (3) Engine cylinder (4) Air inlet (5) Turbocharger compressor wheel (6) Turbocharger turbine wheel (7) Exhaust outlet
Illustration 2 g01610321
Air Inlet And Exhaust System (1) Exhaust manifold (3) Engine cylinder (4) Air inlet (5) Turbocharger compressor wheel (6) Turbocharger turbine wheel (7) Exhaust outletClean inlet air from the air cleaners is pulled through air inlet (4) into the turbocharger compressor by compressor wheel (5). The rotation of the compressor wheel compress the air. The rotation of the turbocharger compressor wheel then forces the air through a tube to aftercooler (2). The aftercooler lowers the temperature of the compressed air before the air enters the inlet chamber in each cylinder head. Air flow from the inlet chamber into the cylinder heads is controlled by the inlet valves.There are two inlet valves and two exhaust valves for each cylinder. Refer to Systems Operation, "Valve Mechanism". The inlet valves open when the piston moves down on the inlet stroke. The cooled, compressed air is pulled into the cylinder from the inlet chamber.The inlet valves close and the piston starts to move up on the compression stroke. When the piston is near the top of the compression stroke, fuel is injected into the cylinder. The fuel mixes with the air and combustion starts. The force of the combustion pushes the piston downward on the power stroke. When the piston moves upward again, the piston is on the exhaust stroke. The exhaust valves open and the exhaust gases are pushed through the exhaust port into exhaust manifold (1). After the piston makes the exhaust stroke, the exhaust valves close and the cycle starts again.Exhaust gases from exhaust manifold (1) go into the turbine side of the turbocharger. The exhaust gases cause turbine wheel (6) to turn. The turbine wheel is connected to the shaft that drives the turbocharger compressor wheel (5). The exhaust gases exit through exhaust outlet (7).

Caterpillar parts catalog:

Caterpillar parts catalog
MP15, MP20, MP30 & MP40 Multi-Processor Jaws JMW00001-UP (MACHINE)
VT-30, VT-40, VT-50 & VT-60 Multi-Processor Jaws ZYW00001-UP (MACHINE)

Parts jaw Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.