JAW AS-UPPER 5285386 - Caterpillar

Illustration 1 g02795458
Table 1
Specification for 290-9293 Hoe Stick Gp    
Item     Qty     Part     Specification Description    
All the bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all the bores for the pins, the bucket, and the cylinder pin bores.    
1     -     -     Stick cylinder must be assembled in order to orient the grease zerk, as shown in Illustration 1.    
2     1     4I-4620 Pin As     Diameter is
69.850 0.025 mm (2.7500 0.0010 inch).    
3     1     4I-4618 Pin As     Diameter is
79.850 0.025 mm (3.1437 0.0010 inch).    
4     2     166-1497 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
5     Bushings are one of the following part numbers:    
2 284-7354 Bushing (1)     Bore of the bushing before assembly is
110.30 0.04 mm (4.343 0.002 inch).
Installation depth is
9.5 0.8 mm (0.37 0.03 inch).    
2 278-9256 Bushing (1)     Bore of the bushing before assembly is
110.20 0.02 mm (4.339 0.001 inch).
Installation depth is
9.5 0.8 mm (0.37 0.03 inch).    
6     2     235-7679 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
7     2     166-1495 Lip Type Seal     Lubricate the sealing lip lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.    
8     2     228-5614 Bushing (1)     Bore of the bushing before assembly is
70.17 0.04 mm (2.763 0.002 inch).
Installation depth is
9.5 0.8 mm (0.37 0.03 inch).    
9     2     228-5615 Bushing (1)     Bore of the bushing before assembly is
90.25 0.04 mm (3.553 0.002 inch).
Installation depth is
9.5 0.8 mm (0.37 0.03 inch).    
( 1 ) Install the bushing in the bore so that the part number of the bushing is facing outward.