JOINT GROUP- 1681913 - Caterpillar

Illustration 1 g03575976
Illustration 2 g03379927
(1) Keypad guidance area
(2) Back Button
(3) "OK" Button
(4) Left key
(5) Up key
(6) Down key
(7) Right key
Enter the Tool Programming menu by selecting Tool Programming from the Service menu. Note: A password is required to enter Service Mode. Refer to Systems Operation, "Service Mode" for instructions to get to the Service menu.
Press the Up key (5) or the Down key (6) until "Tool Programming" is highlighted. Press the "OK" button (3).
Press the Up or Down key until the desired tool is selected. Press the "OK" button. Note: The work tool can also be selected using the soft keys in the right control pad.
Illustration 3 g03575979
Typical screen for "Tool Program" item.
Press the Up or Down key to highlight the parameter that is to be changed. Press the "OK" button. The parameter will be highlighted. See Illustration 3.
Press the Up or Down key to change the value. Press the "OK" button to set the value. Note: The indication items vary by model.
Press the Back button (2) to return to the previous menu.