JOINT AS 1958459 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00871581
Install gasket (15) .
Install turbocharger (11) .
Apply 5P-3931 Anti-Seize Compound on the threads of the mounting studs. Install nuts (14) on each stud. Tighten the nuts to a torque of 54 5 N m (40 4 lb ft).
Illustration 2 g00871668
Position the tube assembly onto the cylinder block. Install bolts (12) .
Illustration 3 g00871579
Connect hose assembly (10) onto turbocharger (11) .
Illustration 4 g00871578
Tighten bolts (9) .
Illustration 5 g00871577
Position tubes (7) and elbow (8) .
Tighten clamps (6) .
Illustration 6 g00871573
Illustration 7 g00871576
Install clamp (4) .
Position bracket (3) and install bolts (5) .
Illustration 8 g00871572
Position plate (2) and install bolts (1) .