3405794 JOINT AS Caterpillar parts
M318D MH, M322C, M322D, M322D MH
Rating:
Alternative (cross code) number:
CA3405794
340-5794
3405794
CA3405794
340-5794
3405794
Weight: 14 pounds 6 kg.
WHEELED EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Reservoir To Pump Power Steering Pressure Line Hose Assy OE number is 3405794 Compatible For Lexus RX350 07-09 | | Easy installation
Jhtkpbkjscf [Accessory Check] :OE nubmer is 3405794, please check the part number of your product carefully, the matching information is for reference only, if you are not sure about the product, please consult before purchase to avoid unnecessary returns, thank you || [General points for installation]: Designed to simplify the replacement process, it aims to help achieve convenient original installation and save maintenance time. || [Smooth and stable steering system]: Precision design and manufacturing ensure stable oil flow, providing the driver with a consistently smooth and precise steering feel and enhancing the driving experience. || [General Key Points of Core Functions]: The multi-layer structural design helps improve pressure resistance and durability, supporting the smooth operation of the steering system. || [Safety Guarantee]: Prevent steering oil leakage, eliminate the risk of sudden failure of power steering, and ensure driving safety
Jhtkpbkjscf [Accessory Check] :OE nubmer is 3405794, please check the part number of your product carefully, the matching information is for reference only, if you are not sure about the product, please consult before purchase to avoid unnecessary returns, thank you || [General points for installation]: Designed to simplify the replacement process, it aims to help achieve convenient original installation and save maintenance time. || [Smooth and stable steering system]: Precision design and manufacturing ensure stable oil flow, providing the driver with a consistently smooth and precise steering feel and enhancing the driving experience. || [General Key Points of Core Functions]: The multi-layer structural design helps improve pressure resistance and durability, supporting the smooth operation of the steering system. || [Safety Guarantee]: Prevent steering oil leakage, eliminate the risk of sudden failure of power steering, and ensure driving safety
A-Premium Power Steering Hose Pressure Hose Line Assembly Compatible with Lexus RX350 2007 2008 2009, 3.5L, Reservoir To Pump
A-Premium [Vehicle Fitment]: Compatible with Lexus RX350 2007-2009 V6 3.5L || [Reference Number]: 3405794, 443480E020, PSH0585 || [Leakage-Free]: A-Premium power steering pressure and return hose assembly is made of sturdy rubber and alloy, which shows good strength, toughness and is not easy to wear and break. The size, length and port of this power steering hose is the same as the original. After replacing the old, worn-out hose with this power steering hose assembly, there's no more need to put up with annoying p/s fluid leak issues. || [Specifications]: ① Position: Reservoir to Pump; ② Material: High Grade Steel with a zinc coating and 3 Layers Design Rubber; ③ Max Working Pressure: 1,500 psi; ④ Burst Pressure Rating: 8,700 psi; ⑤ Tensile Strength: 1,600 lb; ⑥ Temperature Resistance: From 40 to 151 Degree Fahrenheit; ⑦ Abrasion Resistant: Yes; ⑧ Corrosion Resistant: Yes || [Buy with Confidence]: A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted power steering hose. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind.
A-Premium [Vehicle Fitment]: Compatible with Lexus RX350 2007-2009 V6 3.5L || [Reference Number]: 3405794, 443480E020, PSH0585 || [Leakage-Free]: A-Premium power steering pressure and return hose assembly is made of sturdy rubber and alloy, which shows good strength, toughness and is not easy to wear and break. The size, length and port of this power steering hose is the same as the original. After replacing the old, worn-out hose with this power steering hose assembly, there's no more need to put up with annoying p/s fluid leak issues. || [Specifications]: ① Position: Reservoir to Pump; ② Material: High Grade Steel with a zinc coating and 3 Layers Design Rubber; ③ Max Working Pressure: 1,500 psi; ④ Burst Pressure Rating: 8,700 psi; ⑤ Tensile Strength: 1,600 lb; ⑥ Temperature Resistance: From 40 to 151 Degree Fahrenheit; ⑦ Abrasion Resistant: Yes; ⑧ Corrosion Resistant: Yes || [Buy with Confidence]: A-Premium offers a one-year unlimited-mileage guarantee on our meticulously crafted power steering hose. We offer a wide variety of automotive accessory categories, ensuring that you can hit the road with peace of mind.
Number on catalog scheme:
2
For full view, you need register
Information:
Which Generate This Code:This diagnostic code is recorded when the ECM reads the system voltage as being below 18.0 DCV.The possible causes of this diagnostic code are listed:
Degraded or weak batteries
A charging system component has failed.
The machine harness has failed.
The ECM has failed. This condition is unlikely. Test Step 1. Check the Battery Charge
Measure the no-load battery voltage at the battery posts.
Load-test the batteries. Use the 4C-4911 Battery Load Tester. Refer to Special Instruction, SEHS9249, "Use of 4C-4911 Battery Load Tester for 6, 8 V and 12 V Lead Acid Batteries" and Special Instruction, SEHS7633, "Battery Test Procedure".Expected Result:The measured voltage is between 11.0 VDC and 13.5 VDC for a 12 v system. The measured voltage is between 22.0 VDC and 27.0 VDC for a 24 v system.Results:
OK - The batteries pass the load test. The measured voltage is between 11.0 VDC and 13.5 VDC for a 12 v system. The measured voltage is between 22.0 VDC and 27.0 VDC for a 24 v system. Proceed to test step 3.
Not OK - The battery voltage is low or the battery did not pass the load test.Repair: Check the wiring between the batteries and the ECM.Check the connectors between the batteries and the ECM for moisture and/or corrosion.Repair the wiring and/or the connectors.Recharge batteries. Verify that the repair eliminates the problem.Recharge or replace the faulty batteries. Verify that the repair eliminates the problem. Proceed to test step 2.Test Step 2. Check the Battery Charge
Measure the no-load battery voltage at the battery posts.Expected Result:The batteries pass the load test.Results:
OK - The batteries pass the load test.Repair: Resume normal operation.STOP
Not OK - The battery did not pass the load test.Repair: Replace the faulty batteries. Verify that the repair eliminates the problem.STOPTest Step 3. CHECK THE BATTERY VOLTAGE.
Start the engine and run the engine at high idle for several minutes.
Measure the voltage of the battery at the battery posts.Expected Result:The battery voltage should be greater than 18.0 DCV.Results:
OK - The battery voltage is greater than 18.0 DCV. The battery voltage is correct. Proceed to test step 4.
NOT OK - The battery voltage is NOT greater than 18.0 DCV.Repair: Check the charging system.STOPTest Step 4. CHECK THE SYSTEM VOLTAGE AT THE ECM.
The engine remains running at high idle.
DO NOT DISCONNECT the machine harness from the ECM.
Use the digital multimeter to measure the voltage between all of the possible sources of power and all of the possible sources of ground.Expected Result:The voltage measurement is greater than 18.0 DCV.Results:
OK - The voltage is greater than 18.0 DCV. The battery voltage is correct. Proceed to test step 5.
NOT OK - The voltage is NOT correct. The machine harness has failed.Repair: Repair the machine harness or replace the machine harness.STOPTest Step 5. CHECK IF THE DIAGNOSTIC CODE REMAINS.
Inspect the harness connectors. Clean the contacts of the harness connectors and check the wires for damage to the insulation that is caused by excessive heat, battery acid, or chafing.
Perform a 45 N (10 lb) pull test on each of
Degraded or weak batteries
A charging system component has failed.
The machine harness has failed.
The ECM has failed. This condition is unlikely. Test Step 1. Check the Battery Charge
Measure the no-load battery voltage at the battery posts.
Load-test the batteries. Use the 4C-4911 Battery Load Tester. Refer to Special Instruction, SEHS9249, "Use of 4C-4911 Battery Load Tester for 6, 8 V and 12 V Lead Acid Batteries" and Special Instruction, SEHS7633, "Battery Test Procedure".Expected Result:The measured voltage is between 11.0 VDC and 13.5 VDC for a 12 v system. The measured voltage is between 22.0 VDC and 27.0 VDC for a 24 v system.Results:
OK - The batteries pass the load test. The measured voltage is between 11.0 VDC and 13.5 VDC for a 12 v system. The measured voltage is between 22.0 VDC and 27.0 VDC for a 24 v system. Proceed to test step 3.
Not OK - The battery voltage is low or the battery did not pass the load test.Repair: Check the wiring between the batteries and the ECM.Check the connectors between the batteries and the ECM for moisture and/or corrosion.Repair the wiring and/or the connectors.Recharge batteries. Verify that the repair eliminates the problem.Recharge or replace the faulty batteries. Verify that the repair eliminates the problem. Proceed to test step 2.Test Step 2. Check the Battery Charge
Measure the no-load battery voltage at the battery posts.Expected Result:The batteries pass the load test.Results:
OK - The batteries pass the load test.Repair: Resume normal operation.STOP
Not OK - The battery did not pass the load test.Repair: Replace the faulty batteries. Verify that the repair eliminates the problem.STOPTest Step 3. CHECK THE BATTERY VOLTAGE.
Start the engine and run the engine at high idle for several minutes.
Measure the voltage of the battery at the battery posts.Expected Result:The battery voltage should be greater than 18.0 DCV.Results:
OK - The battery voltage is greater than 18.0 DCV. The battery voltage is correct. Proceed to test step 4.
NOT OK - The battery voltage is NOT greater than 18.0 DCV.Repair: Check the charging system.STOPTest Step 4. CHECK THE SYSTEM VOLTAGE AT THE ECM.
The engine remains running at high idle.
DO NOT DISCONNECT the machine harness from the ECM.
Use the digital multimeter to measure the voltage between all of the possible sources of power and all of the possible sources of ground.Expected Result:The voltage measurement is greater than 18.0 DCV.Results:
OK - The voltage is greater than 18.0 DCV. The battery voltage is correct. Proceed to test step 5.
NOT OK - The voltage is NOT correct. The machine harness has failed.Repair: Repair the machine harness or replace the machine harness.STOPTest Step 5. CHECK IF THE DIAGNOSTIC CODE REMAINS.
Inspect the harness connectors. Clean the contacts of the harness connectors and check the wires for damage to the insulation that is caused by excessive heat, battery acid, or chafing.
Perform a 45 N (10 lb) pull test on each of
Caterpillar parts catalog:
Parts joint Caterpillar catalog:
1640515
JOINT
305.5, 305.5E, 306, 306E, 307C, 307D, 307E, 308E, 308E2 CR, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 316E L, ...
305.5, 305.5E, 306, 306E, 307C, 307D, 307E, 308E, 308E2 CR, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 315C, 315D L, 316E L, ...
M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318D, M318D MH
M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318D, M318D MH
2751952
JOINT AS
M318C, M318C MH, M318D MH, M322C, M322D, M322D MH
M318C, M318C MH, M318D MH, M322C, M322D, M322D MH
2751953
JOINT AS
M318C, M318C MH, M318D MH, M322C, M322D, M322D MH
M318C, M318C MH, M318D MH, M322C, M322D, M322D MH
3405792
JOINT AS
M318D MH, M322C, M322D, M322D MH
M318D MH, M322C, M322D, M322D MH
3405793
JOINT AS
M318D MH, M322C, M322D, M322D MH
M318D MH, M322C, M322D, M322D MH
3405793
JOINT AS
M318D MH, M322C, M322D, M322D MH
M318D MH, M322C, M322D, M322D MH
3405792
JOINT AS
M318D MH, M322C, M322D, M322D MH
M318D MH, M322C, M322D, M322D MH
2956538
JOINT AS
M315D, M316D, M318D
M315D, M316D, M318D
2956537
JOINT AS
M315D, M316D, M318D
M315D, M316D, M318D
3173007
JOINT
307D
307D
3173006
JOINT
307D
307D
3G4605
JOINT ASSEM.
235, 245, 943, 953
235, 245, 943, 953
8J6235
JOINT ASSEM.
235, 245
235, 245
215, 215B, 225
3639606
JOINT
312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D L, 324E...
312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D L, 324E...
3346448
JOINT
314D LCR
314D LCR