JOINT GP-SLIP 4975004 - Caterpillar

Table 1
Sales Model     Serial Number    
834G     S/N:6GZ1-UP (1)    
834G     S/N:BPC1-UP (1)    
834H     S/N:BTX1-300    
988H     S/N:BXY1-1900    
( 1 ) The 131-0427 Temperature Sensor Group will be replaced with the 288-8390 Temperature Sensor Group when 292-3869 Sensor Harness Assembly is used.
Table 2
Sales Model     Serial Number    
834H     S/N:BTX301-UP    
988H     S/N:BXY1901-UP    Procedure For Replacing the Sensor Harness Assembly
Table 3
Part Numbers for the Improved Sensor Harness Assembly    
Quantity     Part Number     Description    
4     4V-1939     Clamp    
2     107-4749     Plate    
2     286-7273     Bracket Assembly    
1     292-3869     Sensor Harness Assembly    
1     091-0081     Spacer    
4     7X-2534     Bolt    
2     8T-4121     Hard Washer    
1     8T-4137     Bolt    
1     8T-4195     Bolt    
4     9X-8256     Washer    
Table 4
Part Numbers for the Temperature Sensor Group    
1     288-8390     Temperature Sensor Group    
1     3J-1907     O-Ring Seal    
2     9X-6772     Cable Strap    
Illustration 1 g01369833
Remove 141-8714 Sensor Harness Assembly (1). Remove bolts (2) that attach 141-8714 Sensor Harness Assembly (1) to the rear axle and the trunnion.
Illustration 2 g01369907
Place 292-3869 Sensor Harness Assembly (4) in the same location as 141-8714 Sensor Harness Assembly (1). The new clamps (3) should cover the green tape on the new sensor harness assembly (4). The clamps will be attached to the rear axle and the trunnion. Note: Illustration 2 shows the area that 8T-4195 Bolt (5) and 091-0081 Spacer (6) should be placed.