AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1261373 CYLINDER BLOCK GP 1261372-PAGE 16.04 FIELD REPLACEMENT FOR 1179512-PAGE 16.01 PR-750B COLD PLANER


BASIC ENGINE
CYLINDER BLOCK GP
CAMSHAFT GP
CYLINDER BLOCK GP
LIFTING GP-ENGINE
CRANKSHAFT GP
PISTON & ROD GP
CYLINDER HEAD GP

COLD PLANER PR-750B COLD PLANER 8AC
 PR-750B PAVEMENT PROFILER 8AC00001-UP (MACHINE) POWERED BY 3412 ENGINE KEBP0051 PR-750B 8AC   (1985)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
4N-1201 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4N-1201 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-4859 CYLINDER BLOCK GP
CYLINDER BLOCK AS
7N-0841 CYLINDER BLOCK AS
CYLINDER BLOCK AS
117-9512 CYLINDER BLOCK AS
CYLINDER BLOCK GP
117-9514 CYLINDER BLOCK GP
CYLINDER BLOCK GP
126-1373 CYLINDER BLOCK GP
CYLINDER BLOCK AS
126-1372 CYLINDER BLOCK AS
COVER GP-CYLINDER BLOCK
4N-6866 COVER GP-CYLINDER BLOCK
 

#KEBP00510020
 

126-1373: CYLINDER BLOCK GP

1261373 CYLINDER BLOCK GP
1261372-PAGE 16.04
FIELD REPLACEMENT FOR 1179512-PAGE 16.01
c619504 KEBP0051
1261373 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your PR-750B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-6534 [4] PLUG-PIPE  
2. 9S-4190 [8] PLUG-O-RING  
  114-4427 [8] SEAL-O-RING  
3. 8T-6757 [6] PLUG-PIPE (1/8-27 NPTF THD)  
4. 7W-6492 [2] PLUG-PIPE (1/2-14 NPTF THD)  
5. 126-1372 Y [1] CYLINDER BLOCK AS  
6. 3S-6605 [2] PLUG-CUP  
7. 8T-6763 [4] PLUG  
8. 3B-0645 [1] PLUG-CUP  
9. 7C-9614 [3] PLUG-TAPERLOCK  
    (1.63IN-12 THD)
  Y   SEPARATE ILLUSTRATION
 

#KEBP00510021
 

126-1372: CYLINDER BLOCK AS

1261372 CYLINDER BLOCK AS
PART OF 1261373 CYLINDER BLOCK
FIELD INSTALLATION
c619482 KEBP0051
1261372 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your PR-750B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-1323 [14] BOLT-BEARING CAP  
  9H-1031 [14] WASHER-HARD  
2. 4N-5858 [7] CAP  
3. 4N-6658 [2] BEARING-SLEEVE  
4. 4N-0685 [5] BEARING-SLEEVE  
  4W-4588 AFJ SLEEVE-LIFTER BORE  
  4W-6061 AFL SLEEVE-BOTTOM LINER  
  2W-3815 AFJ INSERT-SEAT  
    1.59MM(.06IN)THK
  5N-0093 AFJ INSERT-SEAT  
    2.7MM(.11IN)THK
  9Y-3368 AFJ INSERT-SEAT  
    .834MM(.03IN)THK
   
    J-FOR SALVAGE OF DAMAGED
    LIFTER BORES IN
    CYLINDER BLOCK (QTY TO
    BE DETERMINED BY USER)
    L-FOR SALVAGE OF THE
    BOTTOM LINER O-RING
    BORE (QTY TO BE
    DETERMINED BY USER)
  F   NOT SHOWN
 

#KEBP00510022
 

4N-0965: CAMSHAFT GP

4N0965 CAMSHAFT GP-SINGLE
c629131 KEBP0051
4N0965 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your PR-750B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0342 [1] PLATE-CAMSHAFT THRUST  
2. 0S-0509 [2] BOLT  
3. 2W-5289 R [1] CAMSHAFT AS  
4. 101-3374 [1] GEAR-CAMSHAFT DRIVE  
    (86 TEETH)
5. 1B-8705 [1] KEY-WOODRUFF  
  R   REMFG PART MAY BE AVAILABLE
 

#KEBP00510023
 

4N-6866: COVER GP-CYLINDER BLOCK

4N6866 COVER GP-CYLINDER BLOCK
c545098 KEBP0051
4N6866 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your PR-750B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 C [9] BOLT  
2. 4N-1683 [1] COVER  
  4N-1684 [1] GASKET  
3. 2P-2772 B [1] COVER  
  4N-0933 B [1] GASKET  
4. 4N-1682 [1] COVER  
  4N-0864 [1] GASKET  
5. 4N-0794 B [1] COVER  
  4N-0790 B [1] GASKET  
6. 0L-1351 C [2] BOLT  
7. 5M-2894 [11] WASHER  
8. 0S-1594 B [1] BOLT  
  5M-2894 B [1] WASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00510024
 

7N-7767: LIFTING GP-ENGINE

7N7767 LIFTING GP-ENGINE
c583817 KEBP0051
7N7767 LIFTING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your PR-750B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1751 [1] BRACKET-LIFTING (R.H.-FRONT)  
  1N-3722 [1] BRACKET-LIFTING (L.H.-REAR)  
2. 0S-1585 [8] BOLT  
  5P-8245 [8] WASHER  
 

#KEBP00510025
 

4N-0922: CRANKSHAFT GP

4N0922 CRANKSHAFT GP
c655899 KEBP0051
4N0922 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your PR-750B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4088 RC [1] CRANKSHAFT AS  
2. 4N-0684 [1] DOWEL  
3. 2W-3878 [1] GEAR-CRANKSHAFT  
    (99 TEETH)
4. 8T-6757 [6] PLUG-PIPE  
5. 7S-5005 [1] DOWEL  
6. 7E-9262 [2] PLATE-THRUST  
7. 2W-1733 [1] SEAL GP-CRANKSHAFT  
8. 4W-5492 [7] BEARING-MAIN (STANDARD)  
  4W-5698 AC [7] BEARING-MAIN (.025IN US)  
  4W-5699 AC [7] BEARING-MAIN (.050IN US)  
  4W-5700 AC [7] BEARING-MAIN (.025IN OS)  
  4W-5701 AC [7] BEARING-MAIN (.025IN OS)  
    (.025IN US)
9. 2W-1734 [1] SEAL GP-CRANKSHAFT  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#KEBP00510026
 

2W-9053: PISTON GP

2W9053 PISTON GP
PART OF 2W9054 ROD & PISTON
c307861 KEBP0051
2W9053 PISTON GP Parts scheme
  For full view, you need register

Parts for your PR-750B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-0865 R [1] BODY AS-PISTON  
2. 1W-9460 [1] RING (TOP)  
3. 2P-2817 [1] RING-INTERMEDIATE  
4. 7N-7078 [1] RING-OIL  
  1W-8922 FA [1] RING GP-PISTON (STANDARD)  
    (CONSISTS OF A
    COMPLETE SET OF RINGS
    FOR ONE PISTON)
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  R   REMFG PART MAY BE AVAILABLE
 

#KEBP00510027
 

2W-9054: PISTON & ROD GP

2W9054 ROD & PISTON GP-12 REQUIRED
2W9053-PAGE 19
c496696 KEBP0051
2W9054 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your PR-750B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-1608 [1] PIN-PISTON  
2. 8N-7295 [2] RETAINER-PIN  
3. 8N-1728 R [1] ROD AS-CONNECTING  
  8N-2018 [1] BEARING-SLEEVE  
4. 6N-8942 [2] BOLT-CONNECTING ROD  
  8L-3441 [2] NUT  
5. 9Y-9497 C [1] BEARING-CONNECTING ROD (STANDARD)  
  4W-5702 CA [1] BEARING-CONNECTING ROD  
    .025IN(.63MM)UNDERSIZE
  4W-5703 CA [1] BEARING-CONNECTING ROD  
    .050IN(1.27MM)UNDERSIZE
6. 2W-9053 Y [1] PISTON GP  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00510028
 

4W-7007: CYLINDER HEAD GP

4W7007 CYLINDER HEAD GP-PART 1 OF 2*R
ENGINE S/N 38S13236-13380
7W2242-PAGE 24
c326935 KEBP0051
4W7007 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your PR-750B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-2583 [1] BRACKET-FUEL PUMP  
2. 0S-1591 [1] BOLT  
3. 5M-2894 [2] WASHER  
4. 8S-9191 [1] BOLT  
5. 1A-5183 [1] BOLT  
6. 5B-2638 [1] BOLT  
7. 6N-6733 [1] SUPPORT-HOUSING-LH  
8. 2W-7985 [2] GASKET-CYLINDER HEAD  
9. 2H-3750 [40] BOLT  
10. 5H-1504 [40] WASHER-HARD  
11. 7W-2242 Y [2] CYLINDER HEAD GP  
12. 0L-1352 [11] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00510029
 

4W-7007: CYLINDER HEAD GP

4W7007 CYLINDER HEAD GP-PART 2 OF 2*R
ENGINE S/N 38S13236-13380
c355384 KEBP0051
4W7007 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your PR-750B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0932 B [2] PLUG-CUP  
2. 5P-0063 B [4] PLUG-CUP  
3. 3J-5390 [2] PLUG  
4. 4W-1055 [48] SEAL-WATER  
5. 6V-5699 [24] STUD-TAPERLOCK  
6. 1B-5174 [2] PLUG-PIPE  
7. 2B-0858 [2] PLUG-PIPE  
8. 3J-5389 [2] PLUG  
9. 5M-6214 B [2] PLUG-PIPE  
10. 6N-6734 [1] SUPPORT-HOUSING-RH  
11. 5B-2638 [1] BOLT  
12. 1A-5183 [1] BOLT  
13. 5M-2894 [3] WASHER  
14. 0S-1591 [1] BOLT  
15. 8S-9191 [2] BOLT  
16. 1W-5207 [1] BRACKET-FUEL PUMP  
17. 5H-7153 C [12] SEAL  
18. 7W-1645 C [12] ADAPTER  
19. 4N-7253 C [12] GASKET-CHAMBER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Engine News
Improved Gasket Now Used Between The Flywheel Housing And The Cylinder Block
1979/05/09
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay
1981/01/21
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods
1981/07/15
Check Bottom Surface Of Cylinder Liner Flange For Erosion And Wear
1981/11/25
New Cylinder Liners And O-Ring Seals Give Longer Seal Life
1981/12/16
Carbon Build-Up In Combustion And Inlet Areas
1982/04/07
Use Correct Part Numbers For Main And Connecting Rod Bearings
1982/05/12
New Crankshaft Main Bearings Used
1982/05/12
Inspection Marks On Bearings
1982/05/12
New Head Gasket Improves Seal Between Block And Liner Flange
1982/10/20
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings
1982/12/15
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1983/01/19
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again
1983/07/06
New Liner Seat Insert Available
1983/08/17
New Connecting Rod And Main Bearings Used
1983/11/30
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/16
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings
1984/05/16
New Cylinder Block Groups Used
1984/10/03
Install Crankshaft Thrust Bearings Correctly To Avoid Damage
1985/02/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
New Cylinder Liner Available
1986/02/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
3400 Engine Major Component Performance Guide Available
1987/07/01
Mid-Life Bearing Maintenance Recommendations
1987/09/01
New Piston Cooling Jets Used
1987/09/01
New Liner Seat Insert Available
1988/12/01
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups
1990/12/01
Service Tips For Piston Cooling Jets (Tubes)
1990/12/01
Thinner Spacer Plates Available For Parts Service
1992/06/01
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In
1992/08/01
New Liner Seat Inserts Available
1992/11/01
Cylinder Pack Puller Groups Improved
1993/01/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01
Flywheel Housing To Cylinder Block Joint Improvements{1157,1201}
1997/01/22
New Block Cover Used{1201}
1999/05/01
New Cylinder Liners
1977/01/28
Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength
1977/01/28
Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed
1977/07/13
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
External (Outside) Oil Lines Now Used Instead Of The Oil Passage In The Cylinder Block And Flywheel Housing
1978/05/03
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
The Cylinder Liners Have a New Appearance {1216}
2005/03/14
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
Liner Flange Breakage
Liner Flange Breakage
Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239}
Damaged Liner Seals on 3400 Reman Cylinder Packs {1201, 1216, 1239}
Specifications
Cylinder Block
3408C & 3412C INDUSTRIAL ENGINES
Cylinder Liners
3408C & 3412C INDUSTRIAL ENGINES
Cylinder Liner Projection
3408C & 3412C INDUSTRIAL ENGINES
Connecting Rod And Main Bearing Journals
3408C & 3412C INDUSTRIAL ENGINES
Cylinder Block
3412 INDUSTRIAL AND MARINE ENGINES
Cylinder Liners
3412 INDUSTRIAL AND MARINE ENGINES
Cylinder Liner Projection
3412 INDUSTRIAL AND MARINE ENGINES
Connecting Rod And Main Bearing Journals
3412 INDUSTRIAL AND MARINE ENGINES
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3200 Engine Cylinder Blocks {1201}
Reuse and Salvage for 3200 Engine Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Disassembly and Assembly
Valve Seat Inserts
3408C & 3412C INDUSTRIAL ENGINES
Spacer Plates
3408C & 3412C INDUSTRIAL ENGINES
Camshaft Bearings
3408C & 3412C INDUSTRIAL ENGINES
Cylinder Liners
3408C & 3412C INDUSTRIAL ENGINES
Crankshaft Main Bearings
3408C & 3412C INDUSTRIAL ENGINES
Piston Cooling Tubes
3408C & 3412C INDUSTRIAL ENGINES
Camshaft Bearings
3412 INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3412 INDUSTRIAL & MARINE ENGINES
Spacer Plates
3412 INDUSTRIAL & MARINE ENGINES
Piston Cooling Tubes
3412 INDUSTRIAL & MARINE ENGINES
Cylinder Liners
3412 INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
3412 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay{1230,1219,1203}
1981/01/19
Crankshaft Failures; New Thrust Plate{1203,1202,1230}
1981/05/04
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Check Bottom Surface Of Cylinder Liner Flange For Erosion And Wear{1216,1201}
1981/11/16
New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Main Bearings Used{1203}
1982/05/10
New Head Gasket Improves Seal Between Block And Liner Flange{1101,1201}
1982/09/27
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings{1211,0621}
1982/11/22
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again{1201,0374}
1983/07/04
New Liner Seat Insert Available{1217}
1983/08/15
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings{1211}
1984/05/07
Salvaging Cylinder Block Top Decks After Liner Seat Erosion{1201,1216,1217}
1984/06/04
New Cylinder Block Groups Used{1201}
1984/10/01
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
New Cylinder Liner Available{1201}
1986/02/10
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Cylinder Liners{1216}
1977/01/24
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Use New Procedure To Tighten Flywheel Housing Bolts{1157,1201}
1977/07/04
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed{1101,1201}
1977/08/08
Replacement Bearings Have Aluminum Alloy With More Strength{1203,1213,1230}
1977/10/24
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Stronger Timing Gear Housing; Additional Stud Used At Top Of Housing{1151,1201}
1987/02/23
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Recommendations For Preventing Cooling System Damage {1201}
1987/08/31
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
New Piston Cooling Jets Used {1213,1214}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
External (Outside) Oil Lines Now Used Instead Of The Oil Passage In The Cylinder Block And Flywheel Housing{1307}
1978/05/01
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
New Liner Seat Insert Available{1201,1216,1217}
1988/11/14
Improved Gasket Now Used Between The Flywheel Housing And The Cylinder Block{1157,1201}
1979/04/30
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Design Thrust Plate Used In Crankshaft Group{1201,1202,1203}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Dimensions For Aluminum Washer{1221}
1990/07/23
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29
New Liner Seat Inserts Available{1217}
1992/11/09
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24
The Cylinder Liners Have a New Appearance {1216}
2005/03/14

Caterpillar Parts SIS Catalog PR-750B :

CYLINDER BLOCK GP
117-9514 CYLINDER BLOCK GP
CYLINDER BLOCK AS
117-9512 CYLINDER BLOCK AS
CYLINDER BLOCK AS
7N-0841 CYLINDER BLOCK AS
CYLINDER BLOCK GP
2W-4859 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4N-1201 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4N-1201 CYLINDER BLOCK GP
7R-7502 ENGINE GP
ENGINE GP
7R-7502 ENGINE GP
CYLINDER BLOCK AS
126-1372 CYLINDER BLOCK AS
CAMSHAFT GP
4N-0965 CAMSHAFT GP
COVER GP-CYLINDER BLOCK
4N-6866 COVER GP-CYLINDER BLOCK
LIFTING GP-ENGINE
7N-7767 LIFTING GP-ENGINE
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
PISTON GP
2W-9053 PISTON GP
PISTON & ROD GP
2W-9054 PISTON & ROD GP
CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP

Truck sale:

CAT PR-750B
USD $49,900 
CAT PR-750B

AUG MAQUINARIA
Monterrey, Nuevo Leon, Mexico
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.