AP-800 ASPHALT PAVER 1BF00001-00224 (MACHINE) IMPLEMENTS Caterpillar SIS




ASPHALT PAVER AP-800B ASPHALT PAVER 1BF
 AP-800 ASPHALT PAVER 1BF00001-00224 (MACHINE) KEBP0054 AP-800B 1BF   (1989)

Parts group AP-800B:

  For full view, you need register
IMPLEMENTS
EXTENSION GP
7X-8857 EXTENSION GP-2’ RH VIP
7X8857 SCREED GP-EXTENSION
AN ATTACHMENT
7X-8856 EXTENSION GP-2’ LH VIP
7X8856 EXTENSION GP-VIP-LH
AN ATTACHMENT
EXTENSION GP-SCREED
7X-8858 EXTENSION GP-SCREED
7X8858 EXTENSION GP-SCREED-2 FT. 4 IN
PART OF 8C8856 EXTENSION
AN ATTACHMENT
EXTENSION GP-SCREED
7X-8859 EXTENSION GP-SCREED
7X8859 EXTENSION GP-SCREED
PART OF 7X8857 SCREED-EXTENSION
AN ATTACHMENT
7X-8967 EXTENSION GP-1’ LH VIP
7X8967 EXTENSION GP-1 IN. SCREED-VIP-LH
AN ATTACHMENT
7X-8966 EXTENSION GP-1’ RH VIP
7X8966 EXTENSION GP
AN ATTACHMENT
EXTENSION GP-SCREED
7X-9182 EXTENSION GP-SCREED
7X9182 EXTENSION GP-SCREED
PART OF 7X8966 EXTENSION
AN ATTACHMENT
EXTENSION GP-SCREED
7X-9183 EXTENSION GP-SCREED
7X9183 EXTENSION GP-SCREED-VIP-L.H.
PART OF 7X8967 EXTENSION
AN ATTACHMENT
7X-9162 EXTENSION GP-1’
7X9162 EXTENSION GP-1'
SCREED S/N 2PF1-UP, 2SF90-UP, 2NF1-UP & 2LF1-UP ???
PART OF 8C3950, 8C3953, 8C3954 & 8C4335 SCREED ARS
AN ATTACHMENT
7X-9164 EXTENSION GP-RH
7X9164 EXTENSION GP-RH 1'
SCREED S/N 2LF1-UP ???
PART OF 8C4335 SCREED AR
AN ATTACHMENT
7X-9165 EXTENSION GP-LH
7X9165 EXTENSION GP-LH
SCREED S/N 2LF1-UP ???
PART OF 8C4335 SCREED AR
AN ATTACHMENT
ROLLER GP-PUSH
ROLLER GP-PUSH
8C-4339 ROLLER GP-PUSH
8C4339 ROLLER GP-PUSH (8'6")
REPLACED BY 6R2241
AN ATTACHMENT
ROLLER GP-PUSH
6R-2241 ROLLER GP-PUSH
6R2241 ROLLER GP-PUSH
AN ATTACHMENT
ROLLER AR-PUSH
8C-7457 ROLLER AR-PUSH
8C7457 ROLLER AR-PUSH-(OSCILLATING)
REPLACED BY 5E9822
AN ATTACHMENT
ROLLER GP-PUSH
5E-9822 ROLLER GP-PUSH
5E9822 ROLLER GP-PUSH
AN ATTACHMENT
ROLLER AS-PUSH
1C-4717 ROLLER AS-PUSH
1C4717 ROLLER AS-PUSH-PART 1 OF 2
AN ATTACHMENT
ROLLER AS-PUSH
1C-4717 ROLLER AS-PUSH
1C4717 ROLLER AS-PUSH-PART 2 OF 2
AN ATTACHMENT
ROLLER AS-PUSH
8C-3948 ROLLER AS-PUSH
8C3948 ROLLER AS-PUSH
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Service Magazine
Initial Oil Change Recommendation{7528}
1986/12/22
Special Instruction
Installation of Fastener Hardware and Tightening Procedure for Asphalt Paver Auger Sections{6631}
Installation of Fastener Hardware and Tightening Procedure for Asphalt Paver Auger Sections{6631}
Disassembly and Assembly
Screed Extension
VIP ASPHALT SCREEDS
Screw Conveyor
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Screw Conveyor
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Service Magazine
Lifting Lug Added To Screed Extensions {8225}
1987/11/30
Two-Piece Front Wear Plates Used For Easier Removal Of VIP Screed Extensions{8225}
1987/12/14
New 2'4" Screed Extensions Available {6640,6641}
1989/05/22
Correct Type Of Auger Quarter Segment On Each Side Of Drive Housing {6631}
1989/08/07
Variable Increment Pavers (VIP) Screed Extension Wear Plates Have A 15 Degree Angle{6643,6641}
1990/12/10
New Walkway Available{6641,7255}
1991/03/11
Special Instruction SEHS9284 Available To Provide Correct Procedure To Install And Tighten New Hardware For Paver Auger Sections{6631}
1991/09/23
Improved Spherical Truck Hitch Available{7122}
1991/03/04
Truck Hitch Cylinder Lines May Be Reversed{7122}
1992/07/27
New Ball Bearing Supported Rollers Used In Push Roller Groups{7122}
1993/12/13
Initial Oil Change Recommendation{7528}
1986/12/22
Special Instruction
Installation of Hydraulic Screed Counterbalance System{8225}
Installation of Hydraulic Screed Counterbalance System{8225}
Installation of Fastener Hardware and Tightening Procedure for Asphalt Paver Auger Sections{6631}
Installation of Fastener Hardware and Tightening Procedure for Asphalt Paver Auger Sections{6631}
Service Letter-NACD
Shields Need To Be Installed Around The Rotating Vibrator Shafts On Certain AP-800 And AP-1200 Pavers Equipped With A VIP Screed
Shields Need To Be Installed Around The Rotating Vibrator Shafts On Certain AP-800 And AP-1200 Pavers Equipped With A VIP Screed
Product Support Program For Updating Screed Burners On Certain AP-800, AP-800B, AP-1050, And AP-1200 Asphalt Pavers
Product Support Program For Updating Screed Burners On Certain AP-800, AP-800B, AP-1050, And AP-1200 Asphalt Pavers
Service Letter-Australia
Shields Need To Be Installed Around The Rotating Vibrator Shafts On Certain AP-800 And AP-1200 Pavers Equipped With A VIP Screed
Shields Need To Be Installed Around The Rotating Vibrator Shafts On Certain AP-800 And AP-1200 Pavers Equipped With A VIP Screed
Service Letter-CFEL
Service Letter-Americas
Specifications
VIP Screed
ASPHALT SCREEDS
V Screed
ASPHALT SCREEDS
Pavemaster Screed
ASPHALT SCREEDS
Conveyor Drive Motor
AP-800B ASPHALT PAVER CONVEYOR SYSTEMS
Torque Hub
AP-800B ASPHALT PAVER CONVEYOR SYSTEMS
Drive Chain Tension
AP-800B ASPHALT PAVER CONVEYOR SYSTEMS
Drag Conveyor Chain Tension
AP-800B ASPHALT PAVER CONVEYOR SYSTEMS
Service Letter-China
Shields Need To Be Installed Around The Rotating Vibrator Shafts On Certain AP-800 And AP-1200 Pavers Equipped With A VIP Screed
Shields Need To Be Installed Around The Rotating Vibrator Shafts On Certain AP-800 And AP-1200 Pavers Equipped With A VIP Screed
Service Letter-Asia
Systems Operation
Systems Operation
ASPHALT SCREEDS
Service Letter-APD
Shields Need To Be Installed Around The Rotating Vibrator Shafts On Certain AP-800 And AP-1200 Pavers Equipped With A VIP Screed
Shields Need To Be Installed Around The Rotating Vibrator Shafts On Certain AP-800 And AP-1200 Pavers Equipped With A VIP Screed
Testing and Adjusting
Testing and Adjusting
ASPHALT SCREEDS
Disassembly and Assembly
Main Screed
PAVEMASTER ASPHALT SCREEDS
Strike-Off
PAVEMASTER ASPHALT SCREEDS
Vibrator System
PAVEMASTER ASPHALT SCREEDS
Main Screed
VIP ASPHALT SCREEDS
Screed Extension
VIP ASPHALT SCREEDS
Vibrator System
VIP ASPHALT SCREEDS
Drag Conveyor Gate Assembly
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Conveyor Drive Pumps
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Screed Lift Cylinder
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Screed
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Screw Conveyor
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Conveyor Drive Drop Housing
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Drag Conveyor Drive Shaft Assembly
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Conveyor Drive Motor
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Conveyor Torque Hub
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Drag Conveyor Front Shaft Inboard Bearing
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Drag Conveyor Front Shaft Outboard Bearing
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Drag Conveyor Sprockets
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Drag Conveyor Chain Assembly
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Drag Conveyor Gate Assembly
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Conveyor Drive Pumps
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Screed Lift Cylinder
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Screed
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Screw Conveyor
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Conveyor Drive Drop Housing
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Drag Conveyor Drive Shaft Assembly
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Conveyor Drive Motor
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Conveyor Torque Hub
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Drag Conveyor Front Shaft Inboard Bearing
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Drag Conveyor Front Shaft Outboard Bearing
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Drag Conveyor Sprockets
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Drag Conveyor Chain Assembly
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Service Magazine
Procedure To Set Up And Level "VIP" Screed{8225}
1986/10/27
Cotter Pins Used In Clevis Pins On Hopper and Screed Lift Cylinders{8235}
1986/12/15
Initial Oil Change Recommendation{7528}
1986/12/22
Drag Chain Assembly Now Serviced{8212}
1987/02/09
Additional Bars Require New Adjustment Procedure For Drag Conveyor Chain{8211}
1987/10/19
New Adjustment Procedure For Conveyor Drive Chains{8211}
1987/10/19
New Adjustment Procedure For Ground Drive Chains{8217}
1987/10/19
New Hydraulic Screed Counterbalance System Available{8225}
1987/11/09
Two-Piece Front Wear Plates Used For Easier Removal Of VIP Screed Extensions{8225}
1987/12/14
Two Hydraulic Snubbers Can Be Added To Protect Pressure Gauge For Screed Counterbalance System{8225}
1987/12/14
Methods To Eliminate End Gate/Wear Plate Interference{8225}
1988/03/21
Operation And Disconnection Of The Screed Counterbalance System{8225}
1988/07/11
Kit Available To Remove Excessive End Play From Automatic Grade Control Jacks{8219}
1988/11/07
New Hydraulic Screed Counterbalance System Available{8225}
1988/11/21
Procedure To Replace Studs In Bottom Wear Plate On VIP Screeds {8225}
1988/12/26
Provide Clearance For Screed End Gates{6640}
1989/06/19
Grease Fittings For Front Drag Chain Bearings Relocated For Easy Access{6630}
1989/11/13
Variable Increment Pavers (VIP) Screed Extension Wear Plates Have A 15 Degree Angle{6643,6641}
1990/12/10
New Walkway Available{6641,7255}
1991/03/11
Power Flow Gate Kit Available{5643}
1991/06/03
Crown Chain Tensioner Available For VIP Screeds{6647,6640}
1991/07/08
Special Instruction SEHS9284 Available To Provide Correct Procedure To Install And Tighten New Hardware For Paver Auger Sections{6631}
1991/09/23
Orange Colored Stringline Now Used In Traveling Stringline And EZ Ski Expansion Groups{5646}
1993/12/06
High Speed Gearmotors Used On Extend-A-Mat® B Screeds Reduces Actuation Times{5640}
1993/12/06
Procedure To Replace Studs In Bottom Wear Plate On VIP Screeds {8225}
1988/12/26
Variable Increment Pavers (VIP) Screed Extension Wear Plates Have A 15 Degree Angle{6643,6641}
1990/12/10
Crown Chain Tensioner Available For VIP Screeds{6647,6640}
1991/07/08
Improved Spherical Truck Hitch Available{7122}
1991/03/04
Truck Hitch Cylinder Lines May Be Reversed{7122}
1992/07/27
New Ball Bearing Supported Rollers Used In Push Roller Groups{7122}
1993/12/13
New Service Bushing Available For Push Rollers{7122}
1994/06/27
Disassembly and Assembly
Drag Conveyor Drive Shaft Assembly
AP-800B ASPHALT PAVER VEHICLE SYSTEMS
Drag Conveyor Drive Shaft Assembly
AP-800 ASPHALT PAVER VEHICLE SYSTEMS
Service Magazine
Many Components That Were Previously Only Serviced As Complete Groups Now Have Serviceable Components {0374}
1990/01/15
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}

Truck sale: