AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N4416 TURBOCHARGER GP ENGINE S/N 6TB3156-3713 9N5264-PAGE 59 SS-250 SOIL STABILIZER


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LUBRICATION SYSTEM
LINES GP-TURBOCHARGER OIL
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
LINES GP-AIR
MANIFOLD GP-EXHAUST

SOIL STABILIZER SS-250 SOIL STABILIZER 6DD
 CAT SS-250 SOIL STABILIZER 6DD00001-00117 (MACHINE) POWERED BY 3406B ENGINE KEBP0064 SS-250 6DD   (1986)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
9N-5264 TURBOCHARGER GP
TURBOCHARGER GP
8N-4416 TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
9N-5263 CARTRIDGE GP-TURBOCHARGER
TURBOCHARGER GP
7C-6615 TURBOCHARGER GP
TURBOCHARGER GP
7C-6624 TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
7C-6610 CARTRIDGE GP-TURBOCHARGER
 

#KEBP00640080
 

8N-4416: TURBOCHARGER GP

8N4416 TURBOCHARGER GP
ENGINE S/N 6TB3156-3713
9N5264-PAGE 59
c337091 KEBP0064
8N4416 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5264 CYR [1] TURBOCHARGER GP  
2. 1S-4295 [1] GASKET-TURBOCHARGER  
3. 2N-2765 [4] BOLT-HIGH TEMP  
4. 2N-2766 [4] LOCKNUT  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00640081
 

9N-5263: CARTRIDGE GP-TURBOCHARGER

9N5263 CARTRIDGE GP-TURBOCHARGER*R
ENGINE S/N 6TB3156-3713
PART OF 9N5264 TURBOCHARGER
c454783 KEBP0064
9N5263 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7962 R [1] BACKPLATE AS  
2. 1P-1120 [1] RING-SEAL  
3. 6N-5004 [1] BEARING-THRUST  
4. 7N-3759 [1] RING-PISTON  
5. 9N-3701 [1] SHROUD-TURBINE WHEEL  
6. 9N-2043 R [1] SHAFT & WHEEL AS  
7. 9M-8915 [3] RING-RETAINING  
8. 9N-2035 R [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVE  
  7W-2368 C [1] RING-SEAL  
9. 9M-8911 [1] COLLAR-THRUST  
10. 9N-2046 [1] SPACER-THRUST  
  9M-8919 [2] RING-SEAL  
11. 1S-1770 [1] LOCKNUT-TURBOCHARGER  
12. 9N-3674 [1] WHEEL-COMPRESSOR  
13. 0S-1616 [4] BOLT  
  9N-2036 [4] PLATE-LOCK  
  9N-2047 F [1] NAMEPLATE-CARTRIDGE  
  2F-0808 F [2] SCREW  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  9N-2041 [1] KIT-BEARING  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  R   REMFG PART MAY BE AVAILABLE
 

#KEBP00640082
 

7C-6615: TURBOCHARGER GP

7C6615 TURBOCHARGER GP
ENGINE S/N 6TB3714-UP
7C6610-PAGE 62
PART OF 7C6624 TURBOCHARGER
c353720 KEBP0064
7C6615 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-6611 [1] HOUSING-COMPRESSOR  
2. 7C-6610 RY [1] CARTRIDGE GP-TURBOCHARGER  
3. 7C-6616 [1] HOUSING-TURBINE  
4. 9N-2038 [1] CLAMP AS (TURBINE)  
5. 9N-2039 [1] CLAMP AS (COMPRESSOR)  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00640083
 

7C-6624: TURBOCHARGER GP

7C6624 TURBOCHARGER GP
ENGINE S/N 6TB3714-UP
7C6615-PAGE 61
c659011 KEBP0064
7C6624 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-6615 Y [1] TURBOCHARGER GP  
2. 1S-4295 [1] GASKET-TURBOCHARGER  
3. 2N-2765 [4] BOLT-HIGH TEMPERATURE  
  2N-2766 [4] LOCKNUT (3/8-16 NPTF THD)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00640084
 

7C-6610: CARTRIDGE GP-TURBOCHARGER

7C6610 CARTRIDGE GP-TURBOCHARGER*R
ENGINE S/N 6TB3714-UP
PART OF 7C6615 TURBOCHARGER
c507072 KEBP0064
7C6610 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-6612 [1] BACKPLATE AS  
  7W-0130 [1] BEARING-THRUST  
  7W-0131 [3] STUD-DRIVE  
2. 1P-1120 J [1] RING-SEAL  
3. 6N-5004 J [1] BEARING-THRUST  
4. 7N-3759 J [1] RING-PISTON  
5. 9Y-1936 [1] SHROUD-TURBINE  
6. 4W-5196 R [1] SHAFT & WHEEL AS  
7. 9M-8915 J [3] RING-RETAINING  
8. 9N-2035 R [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVE  
  7W-2368 C [1] RING-SEAL  
9. 9M-8911 [1] COLLAR-THRUST  
10. 9N-2046 [1] SPACER-THRUST  
  9M-8919 J [2] RING-SEAL  
11. 1S-1770 J [1] LOCKNUT-TURBOCHARGER  
12. 4W-5193 [1] WHEEL-COMPRESSOR  
13. 0S-1616 [4] BOLT  
  9N-2036 J [4] PLATE-LOCK  
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE:
  9N-2041 J [1] KIT-BEARING  
  2W-0715 [1] KIT-CARTRIDGE  
    (INCLUDES PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#KEBP00640085
 

4N-5394: LINES GP-TURBOCHARGER OIL

4N5394 LINES GP-TURBOCHARGER OIL
c608448 KEBP0064
4N5394 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-7540 [2] CLAMP-TUBE  
2. 1A-2029 [3] BOLT (3/8 X 16 X 1.125IN)  
3. 9S-8752 [1] NUT-FULL (3/8 X 16 THD)  
4. 7N-3448 C [1] TUBE AS-OIL  
5. 0S-1571 [3] BOLT (3/8 X 16 X 1.75IN)  
6. 1S-6595 [1] GASKET  
7. 1S-4810 [1] GASKET-OIL DRAIN  
8. 5M-2894 [4] WASHER (2.5MM THK)  
9. 6N-1141 [1] TUBE AS-OIL DRAIN  
  114-2687 [1] SEAL-O-RING  
10. 9M-4584 C [1] CONNECTOR-FLARED  
11. 4N-0699 [1] GASKET  
12. 0S-1619 [1] BOLT (3/8 X 16 X 3IN)  
13. 4N-2040 [1] ELBOW-DRAIN  
14. 3L-9689 [1] WASHER  
15. 114-4427 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00640086
 

7X-9154: AIR CLEANER GP

7X9154 AIR CLEANER GP
c667244 KEBP0064
7X9154 AIR CLEANER GP Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1621 [6] BOLT (1/2-13X1.0IN)  
2. 2H-3788 [6] LOCKNUT (1/2-13 THD)  
3. 8C-1862 [8] CLAMP  
4. 7X-2152 [1] HOSE-HUMP  
5. 098-0534 [1] TUBE  
6. 081-6862 [2] HOSE-ELBOW  
7. 082-2151 [1] TUBE-AIR INLET  
8. 081-6815 [1] STRAP  
9. 6V-1813 [1] NIPPLE-CLOSE  
10. 066-3454 [1] INDICATOR  
11. 6L-2641 [1] BAND AS  
12. 4J-8265 [6] NUT (3/8-16 THD)  
13. 4B-4278 [6] WASHER (1.6MM THK)  
14. 082-1231 [1] U-BOLT  
15. 082-1116 [1] TUBE  
16. 7X-2153 [1] HOSE-HUMP  
17. 5E-8089 [1] SUPPORT  
18. 4B-4277 [2] WASHER  
19. 1D-4716 [2] NUT-FULL (5/16-18 THD)  
20. 0S-1594 [6] BOLT (3/8-16X1IN)  
21. 081-6830 [1] BRACKET  
22. 5E-8088 [1] SUPPORT  
23. 098-0930 Y [1] AIR CLEANER GP  
24. 6N-6071 [1] ELEMENT AS-AIR CLEANER (PRIMARY)  
25. 6N-6072 [1] ELEMENT AS-AIR CLEANER  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00640087
 

098-0930: AIR CLEANER GP

0980930 AIR CLEANER GP
S/N 6DD1-323
c664886 KEBP0064
0980930 AIR CLEANER GP Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-8160 [1] COVER AS  
2. 6L-3308 [1] GASKET  
3. 1N-8161 [1] NUT-WING  
4. 5S-4279 [2] GASKET  
5. 077-4290 [1] ELEMENT-FILTER  
6. 3B-5312 [1] COTTER  
7. 7W-0444 [1] NUT AS  
8. 8C-2238 [1] ELEMENT-AIR CLEANER  
9. Z [1] (BODY ASSEMBLY)  
10. 098-3288 [1] CLAMP  
11. Z [1] (BODY ASSEMBLY)  
12. 5L-2692 [2] GASKET  
13. 6L-3316 [1] CLAMP AS-LOWER  
  6L-3364 [1] NUT-SQUARE  
  6L-3365 [1] BOLT  
14. 6L-3317 [1] CUP AS  
15. 7W-0629 [1] ADAPTER AS-FILTER  
16. Z [1] (NUT)  
  Z   NOT SERVICED SEPARATELY
 

#KEBP00640088
 

8N-4398: LINES GP-AIR

8N4398 LINES GP-AIR
c683112 KEBP0064
8N4398 LINES GP-AIR Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2093 [1] TUBE  
2. 5S-1188 [2] SEAL-O-RING  
3. 4N-1157 [1] COUPLING-EXHAUST  
4. 4L-8337 [2] SEAL-O-RING (81MM ID)  
5. 4N-1010 [1] SUPPORT-ELBOW  
6. 2N-2765 [3] BOLT-HIGH TEMPERATURE  
  2N-2766 [3] LOCKNUT (3/8-16 NPTF THD)  
7. 5L-8854 [2] RING-SEALING  
 

#KEBP00640089
 

9L-6671: SHIELD GP-MANIFOLD

9L6671 SHIELD GP-MANIFOLD
c564397 KEBP0064
9L6671 SHIELD GP-MANIFOLD Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1591 C [2] BOLT  
  9S-8752 [2] NUT-FULL  
2. 9N-1008 C [1] SHIELD AS  
3. 1S-4577 [1] CLAMP  
4. 1S-4577 [1] CLAMP  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W719 Turbocharger Cartridge Repair Kit{1053}
2W719 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W727 Turbocharger Cartridge Repair Kit{1053}
2W727 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Service Letter-NACD
0R5368, 0R5381, 0R5535, 0R5597, 0R5731, 0R5732, 0R5733, 0R5964, 0R6053, 0R6054, 0R6055, AND 0R6056 REMANUFACTURED TURBOCHARGERS NEED TO BE REMOVED FROM DEALER PARTS STOCK
0R5368, 0R5381, 0R5535, 0R5597, 0R5731, 0R5732, 0R5733, 0R5964, 0R6053, 0R6054, 0R6055, AND 0R6056 REMANUFACTURED TURBOCHARGERS NEED TO BE REMOVED FROM DEALER PARTS STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Specifications
Turbocharger Impeller Installation
3406B INDUSTRIAL & MARINE ENGINES
Turbocharger<BR> (T04B91, TW4B91 and TW4C01)
3406B INDUSTRIAL & MARINE ENGINES
Turbochargers<BR> (TV72 &amp; TV78)
3406B INDUSTRIAL & MARINE ENGINES
Turbocharger<BR> (T12)
3406B INDUSTRIAL & MARINE ENGINES
Turbocharger TW81
3406B INDUSTRIAL & MARINE ENGINES
Turbocharger TV81
3406B INDUSTRIAL & MARINE ENGINES
Turbochargers<BR> (Schwitzer F552 &amp; F555)
3406B INDUSTRIAL & MARINE ENGINES
Turbochargers<BR> (Schwitzer 4MFW 701, 4MFW 711, 4MF 721 &amp; 4MFW 731)
3406B INDUSTRIAL & MARINE ENGINES
Turbocharger
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Service Letter-China
0R5368, 0R5381, 0R5535, 0R5597, 0R5731, 0R5732, 0R5733, 0R5964, 0R6053, 0R6054, 0R6055, AND 0R6056 REMANUFACTURED TURBOCHARGERS NEED TO BE REMOVED FROM DEALER PARTS STOCK
0R5368, 0R5381, 0R5535, 0R5597, 0R5731, 0R5732, 0R5733, 0R5964, 0R6053, 0R6054, 0R6055, AND 0R6056 REMANUFACTURED TURBOCHARGERS NEED TO BE REMOVED FROM DEALER PARTS STOCK
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CATERPILLAR REMAN PRODUCTS GROUP ANNOUNCES EXPANDED TURBOCHARGER COVERAGE FOR CERTAIN ENGINE MODELS
CATERPILLAR REMAN PRODUCTS GROUP ANNOUNCES EXPANDED TURBOCHARGER COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
Service Letter-APD
0R5368, 0R5381, 0R5535, 0R5597, 0R5731, 0R5732, 0R5733, 0R5964, 0R6053, 0R6054, 0R6055, AND 0R6056 REMANUFACTURED TURBOCHARGERS NEED TO BE REMOVED FROM DEALER PARTS STOCK
0R5368, 0R5381, 0R5535, 0R5597, 0R5731, 0R5732, 0R5733, 0R5964, 0R6053, 0R6054, 0R6055, AND 0R6056 REMANUFACTURED TURBOCHARGERS NEED TO BE REMOVED FROM DEALER PARTS STOCK
Disassembly and Assembly
Turbocharger
SUPPLEMENT FOR 3406 ENGINE RR-250 ROAD RECLAIMER & SS-250 SO
Turbocharger
3406B INDUSTRIAL & MARINE ENGINES
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Remanufactured Turbocharger Groups And Cartridges{1052,1053}
1987/08/10
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/09
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog SS-250 :

TURBOCHARGER GP
9N-5264 TURBOCHARGER GP
COOLANT CONDITIONER GP
4W-4251 COOLANT CONDITIONER GP
5N-8761 DRIVE GP-FAN
7C-5430 COVER GP-WATER OUTLET
LINES GP-WATER
4N-1641 LINES GP-WATER
LINES GP-WATER
4N-2474 LINES GP-WATER
PUMP GP-WATER
7C-4957 PUMP GP-WATER
PUMP GP-WATER
7W-7019 PUMP GP-WATER
CARTRIDGE GP-TURBOCHARGER
9N-5263 CARTRIDGE GP-TURBOCHARGER
TURBOCHARGER GP
7C-6615 TURBOCHARGER GP
TURBOCHARGER GP
7C-6624 TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
7C-6610 CARTRIDGE GP-TURBOCHARGER
LINES GP-TURBOCHARGER OIL
4N-5394 LINES GP-TURBOCHARGER OIL
AIR CLEANER GP
7X-9154 AIR CLEANER GP
AIR CLEANER GP
098-0930 AIR CLEANER GP
LINES GP-AIR
8N-4398 LINES GP-AIR

Truck sale:

Caterpillar SS-250, Construction
75,875 
Caterpillar SS-250, Construction
- stabilizers / reclaimers
LOUISIANA CAT
CATERPILLAR SS-250 1995
 
CATERPILLAR SS-250 1995
- STABILIZERS / RECLAIMERS
LOUISIANA CAT
Louisiana United States
 
 
CATERPILLAR SS-250 1996
- STABILIZERS / RECLAIMERS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr
1994 CAT SS-250
USD $99,500 
1994 CAT SS-250

UCM Inc.
Mulberry, Florida
CAT SS-250
 
CAT SS-250

Frontier Tractor Parts
Coldspring, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.