AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E6006 PUMP GP-FUEL INJECTION PART OF 4P1381 PUMP GP SS-250 SOIL STABILIZER


FUEL SYSTEM
PUMP GP-FUEL INJECTION
GOVERNOR GP
TORQUE CONTROL GP
PUMP GP-FUEL INJECTION
GAUGE GP
PUMP GP-FUEL INJECTION
ELECTRICAL AND STARTING SYSTEM
CONTROL GP

SOIL STABILIZER SS-250 SOIL STABILIZER 6DD
 CAT SS-250 SOIL STABILIZER 6DD00001-00117 (MACHINE) POWERED BY 3406B ENGINE KEBP0064 SS-250 6DD   (1986)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
2W-8541 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8541 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8541 PUMP GP-GOV & FUEL INJ
PUMP GP-FUEL INJECTION
4W-2549 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1381 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-6006 PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
9Y-1234 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP
 

#KEBP00640120
 

7E-6006: PUMP GP-FUEL INJECTION

7E6006 PUMP GP-FUEL INJECTION
PART OF 4P1381 PUMP GP
c512462 KEBP0064
7E6006 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3409 [1] BONNET-VALVE  
2. 1W-6982 [1] VALVE AS-CHECK  
3. 8N-5993 [1] SPRING-FLOW CHECK  
4. 1N-3257 [1] RING-RETAINER  
5. 7E-6007 [1] PLUNGER & BARREL AS  
 

#KEBP00640121
 

2W-7325: GOVERNOR GP

2W7325 GOVERNOR GP-PART 1 OF 4
PART OF 2W8541 GOVERNOR & FUEL INJECTION PUMP
c621628 KEBP0064
2W7325 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3256 [1] COLLAR-LOAD STOP  
2. 8L-5832 [1] NUT-HEX  
3. 9Y-4701 [1] SETSCREW-SOCKET  
4. 8N-3956 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
5. 1W-4243 [1] SPRING-BUMPER  
6. 7W-5836 C [1] BOLT AS-STOP  
7. 6D-3897 [1] BOLT  
8. 6L-5551 [2] BOLT-SOCKET HEAD  
9. 8N-3776 [1] GASKET-COVER  
10. 9S-8003 [1] PLUG-O-RING  
  1J-9671 [1] SEAL-O-RING  
11. 1N-3887 [1] SETSCREW-SOCKET  
  5C-3180 B [1] NUT  
12. 6V-5029 [1] SEAL-LIP  
13. 1N-3935 [1] COVER  
  8N-3765 [1] GASKET  
14. 4N-8445 [1] BOLT  
15. 2B-2695 [1] BOLT  
  4K-9890 [1] WASHER  
16. 3P-0009 [1] INSULATOR-STUD  
17. 0S-1347 [2] BOLT  
18. 8N-3762 [1] COVER  
  8N-3763 [1] GASKET  
19. 7W-1749 [1] COVER AS  
  8S-6814 [1] PIN  
  8T-2604 [1] SEAL-LIP  
20. 1B-2713 [6] BOLT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00640122
 

2W-7325: GOVERNOR GP

2W7325 GOVERNOR GP-PART 2 OF 4
PART OF 2W8541 GOVERNOR & FUEL INJECTION PUMP
c466344 KEBP0064
2W7325 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5735 [1] LEVER AS-PIVOT  
2. 6V-6835 [1] SETSCREW-SOCKET  
3. 4B-2049 [1] NUT  
4. 4W-5734 [1] LEVER AS  
5. 6V-6835 [1] SETSCREW-SOCKET  
  4B-2049 [1] NUT  
6. 4N-5621 [1] SHAFT-SHUT-OFF  
7. 8N-9384 [1] GASKET  
8. 8L-5832 [1] NUT-HEX  
9. 5H-6552 [1] SETSCREW-SOCKET  
10. 0S-1588 [1] BOLT  
11. 8N-3760 [1] COVER  
  8N-3761 [1] GASKET  
  030-9615 [4] SCREW-NYLOK  
12. 7W-4247 C [1] HOUSING AS-GOVERNOR  
  5P-3272 [1] SEAL-LIP TYPE  
13. 8N-2499 [1] GUIDE-SPRING  
14. 3D-8317 [1] RING-RETAINING  
15. 4N-0260 [1] SEAL-LIP TYPE  
16. 4N-5485 [1] BODY-VALVE  
  5F-9144 [1] SEAL-O-RING  
17. 4N-5484 [1] VALVE-NEEDLE  
  6H-9691 [1] SEAL-O-RING  
18. 1W-5341 [1] LEVER-SHUT-OFF  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00640123
 

2W-7325: GOVERNOR GP

2W7325 GOVERNOR GP-PART 3 OF 4
PART OF 2W8541 GOVERNOR & FUEL INJECTION PUMP
c659007 KEBP0064
2W7325 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-7819 [2] RING-RETAINING  
2. 7N-7270 [2] SLEEVE-SPRING  
3. 2W-2216 [1] SPRING-LINK  
4. 1N-3800 [1] SLEEVE-RACK CONTROL  
5. 031-0216 [3] BOLT  
6. 8N-9678 [1] PISTON AS-SERVO  
  7C-0790 C [1] CYLINDER AS  
  8N-3757 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
7. 5P-9757 [1] SEAL-O-RING  
8. 1W-4098 [1] PISTON-GOVERNOR SERVO  
9. 1N-3802 [1] SEAT-SPRING  
10. 1S-5440 [4] DOWEL  
11. 7M-7219 [1] BEARING-THRUST  
12. 9Y-7037 [4] BOLT  
13. 4N-9019 [1] DOWEL  
14. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
15. 4N-2953 [1] LOCKRING  
16. 133-8890 [2] RACE-NEEDLE BEARING  
17. 7E-3986 C [1] CARRIER-WEIGHT  
18. 119-8699 [4] WEIGHT-GOVERNOR  
19. 4N-0432 [1] BALL BEARING  
20. 8N-9680 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (LONG)  
  4F-6024 [2] PIN (SHORT)  
21. 4W-6868 C [1] RISER-GOVERNOR  
22. 3K-5733 [1] SPRING  
23. 7N-7269 [1] DASHPOT AS-GOVERNOR  
  4N-6410 [1] SPRING-DASHPOT  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
  4N-6404 [1] RING-RETAINING  
24. 2P-9556 [1] WASHER  
  2N-0828 [2] WASHER (SPRING)  
25. 6N-3504 [1] SEAT-GOVERNOR SPRING  
26. 7N-8821 [2] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00640124
 

2W-7325: GOVERNOR GP

2W7325 GOVERNOR GP-PART 4 OF 4
PART OF 2W8541 GOVERNOR & FUEL INJECTION PUMP
c497673 KEBP0064
2W7325 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-5339 [1] SHAFT AS-GOVERNOR  
2. 7W-1321 C [1] PLATE-THROTTLE  
3. 2W-9305 C [1] PLATE-THROTTLE  
4. 2W-6102 [1] LEVER-SPRING SEAT  
5. 5H-2532 [1] KEY-WOODRUFF  
6. 2W-9996 [1] SCREW-IDLE STOP  
7. 7W-4272 C [1] NUT-SEALING  
8. 6V-8137 C [2] SCREW-BUTTON HEAD  
9. 7W-2000 C [1] STOP-DETENT  
10. 7W-1318 C [1] PLATE-RETAINING  
11. 1W-3962 [1] SPACER  
12. 2M-7819 [1] RING-RETAINING  
13. 2W-0800 [1] LEVER-SHUT-OFF  
14. 2W-0799 [1] SPRING-SHUT-OFF  
15. 2W-0801 [1] SHAFT  
16. 8S-7803 [1] RING-RETAINING  
17. 1W-3961 [1] SPACER  
18. 7N-2176 [1] PIN-DETENT  
19. 7N-1052 [1] DOWEL  
20. 2W-7400 C [1] SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00640125
 

2W-8628: TORQUE CONTROL GP

2W8628 TORQUE CONTROL GP
PART OF 2W8541 GOVERNOR & FUEL INJECTION PUMP
c502979 KEBP0064
2W8628 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6452 [1] INSULATOR  
2. 6L-5897 C [2] BOLT  
3. 8M-9062 [1] RETAINER-SPRING  
4. 2W-7234 C [1] BAR-LOAD STOP  
5. 2P-2685 [1] SPACER (.635 MM THK)  
6. 8N-7518 [1] SPRING-TORQUE  
7. 7N-1796 [1] SPACER (1.549MM THK)  
8. 7W-8405 C [1] CONTACT  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00640126
 

9Y-1234: FASTENER GP-FUEL INJ PUMP

9Y1234 FASTENER GP
PART OF 2W8541 GOVERNOR & FUEL INJECTION PUMP
c465247 KEBP0064
9Y1234 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-7040 [2] BOLT  
2. 8S-4710 [4] BOLT  
3. 7B-2742 [2] BOLT  
4. 8F-8178 [1] BOLT  
5. 7X-0869 [1] BOLT-LOCKING  
6. 6V-5894 [2] BOLT  
7. 4F-7957 [2] BOLT  
8. 1B-2716 [2] BOLT  
 

#KEBP00640127
 

6N-8878: GAUGE GP-FUEL PRESSURE

6N8878 GAUGE GP-FUEL PRESSURE
c342677 KEBP0064
6N8878 GAUGE GP-FUEL PRESSURE Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3687 C [1] INDICATOR (FUEL PRESSURE)  
2. 8L-5008 [1] ELBOW-PIPE  
3. 5P-5528 [1] ADAPTER-O-RING  
4. 3J-7354 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00640128
 

1W-7376: FASTENER GP-FUEL INJ PUMP

1W7376 FASTENER GP-FUEL INJECTION PUMP
c564492 KEBP0064
1W7376 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [2] BOLT  
2. 5P-0076 [1] BOLT-12 POINT HEAD  
3. 034-4288 [2] BOLT-12 POINT HEAD  
4. 9S-8752 [2] NUT-FULL  
5. 6V-7681 [1] SEAL-O-RING  
6. 5P-5846 [1] SEAL-O-RING  
7. 2N-3350 [1] SEAL-O-RING  
 

#KEBP00640129
 

5E-9573: CONTROL GP

5E9573 ELECTRICAL GP-PART 1 OF 2
7X8312-PAGE 100
c512607 KEBP0064
5E9573 CONTROL GP Parts scheme
  For full view, you need register

Parts for your SS-250 SOIL STABILIZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2222 [1] WIRE AS  
2. 9N-9989 [2] BUSHING  
3. 077-5980 A [1] SENDER-OIL PRESSURE  
4. 077-3743 A [1] SWITCH (OIL PRESSURE)  
5. 7X-2220 [1] WIRE AS  
6. 7X-2221 [1] WIRE AS  
7. 0S-1614 [2] BOLT  
8. 3B-4504 [2] LOCKWASHER  
9. 9N-9920 A [1] FUSE (20 AMP)  
10. 8T-9915 [1] RELAY-SOLENOID  
11. 7X-2224 [1] CABLE  
12. 7X-2223 [1] WIRE AS  
13. 7X-2179 [1] BRACKET  
14. 7X-2225 [1] WIRE AS  
15. 5E-8099 A [1] STARTING MOTOR  
16. 081-6809 A [1] SENDER-OIL TEMPERATURE  
17. 082-2171 A [1] PLUG  
18. 5E-8100 A [3] SCREW-CAP  
19. 3B-4510 A [3] LOCKWASHER  
20. 7X-2226 [1] HARNESS  
  081-8756 [1] FUSE HOLDER  
  1C-4895 [1] FUSE 40 AMPERE  
   
  7X-8312 YF [1] SHUNT AS  
  5D-3570 F [1] HORN AS  
  FZ [1] WIRE AS (DEPTH CONTROL)  
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2007/08/20
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Commercial Engines {1251, 1290}
2012/07/06
Special Instruction
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Valve Bonnets with Insufficient Hardness
Valve Bonnets with Insufficient Hardness
Specifications
Fuel Injection Nozzle And Adapter<BR> (4TB470-Up), (6TB1779-Up)
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle And Adapter
3406B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406B INDUSTRIAL & MARINE ENGINES
Governor And Fuel Pump Drive Group<BR> (Automatic Timing Advance Unit)
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle And Adapter
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive Group<BR> Automatic Timing Advance Unit
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
Service Letter-Asia
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
Disassembly and Assembly
Fuel Transfer Pump
SUPPLEMENT FOR 3406 ENGINE RR-250 ROAD RECLAIMER & SS-250 SO
Governor &amp; Fuel Injection Pump
SUPPLEMENT FOR 3406 ENGINE RR-250 ROAD RECLAIMER & SS-250 SO
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor Drive
3406B INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Line Adapters
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406B INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assemblies
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle Adapters
3406B INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing &amp; Governor
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pumps
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Eliminating Interference Between Governor Housing And Tachometer Drive{1264,7487}
1985/08/12
Location Of 6V5135 Setscrews In Fuel Pump Group{1250}
1985/08/12
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Retaining Bushing In Fuel Injection Pump {1251,1250}
1986/12/01
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1992/01/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Fuel Injection Pump Improvements{1251}
1994/02/07
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
New Components Used In Governor And Fuel Pump Drive Group{1288}
1996/02/12
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25
New Governor Weight And Race Increase Durability{1264}
1996/09/30
New O-Ring Seals Used On &quot;Through-Head-Adapter&quot; And &quot;Internal Fuel Lines&quot; In Fuel Injection Lines Groups{1252}
1996/10/21
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/04
Improved Bushing O-Ring Seal Available For Injection Pump Groups {1251}
1997/03/03
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/17
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/08
The Procedure for the Removal of the Electronic Unit Injector has Changed. {1290}
2004/05/10
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Machine Engines {1251, 1290}
2012/07/09
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Machines {1250, 1251, 1290, 1713}
2013/10/17
Cat&reg; Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Machine Engines {1251, 1278}
2014/09/04

Caterpillar Parts SIS Catalog SS-250 :

PUMP GP-FUEL INJECTION
4P-1381 PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
2W-4381 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1W-1700 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION
4W-2549 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
2W-8541 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8541 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8541 PUMP GP-GOV & FUEL INJ
CONTROL GP-GOVERNOR
8N-2177 CONTROL GP-GOVERNOR
GOVERNOR GP
2W-7325 GOVERNOR GP
2W-7325 GOVERNOR GP
2W-7325 GOVERNOR GP
2W-7325 GOVERNOR GP
TORQUE CONTROL GP
2W-8628 TORQUE CONTROL GP
FASTENER GP-FUEL INJ PUMP
9Y-1234 FASTENER GP-FUEL INJ PUMP
GAUGE GP-FUEL PRESSURE
6N-8878 GAUGE GP-FUEL PRESSURE
FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP

Truck sale:

Caterpillar SS-250, Construction
75,875 
Caterpillar SS-250, Construction
- stabilizers / reclaimers
LOUISIANA CAT
CATERPILLAR SS-250 1995
 
CATERPILLAR SS-250 1995
- STABILIZERS / RECLAIMERS
LOUISIANA CAT
Louisiana United States
 
 
CATERPILLAR SS-250 1996
- STABILIZERS / RECLAIMERS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr
1994 CAT SS-250
USD $99,500 
1994 CAT SS-250

UCM Inc.
Mulberry, Florida
CAT SS-250
 
CAT SS-250

Frontier Tractor Parts
Coldspring, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.