AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N3033 LINES GP-ENGINE OIL PART OF 8N3032 FILTER-OIL PR-450 COLD PLANER


LUBRICATION SYSTEM
LINES GP-ENGINE OIL
PUMP GP-ENGINE OIL
FUMES DISPOSAL GP
BREATHER GP
COOLING SYSTEM
PUMP GP-WATER

COLD PLANER PR-450 COLD PLANER 7DC
 PR-450 COLD PLANER 7DC00204-UP (MACHINE) POWERED BY 3408 ENGINE KEBP0069 PR-450 7DC   (1985)

LUBRICATION SYSTEM

LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
8N-3033 LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
8N-3034 LINES GP-ENGINE OIL
 

#KEBP00690060
 

8N-3033: LINES GP-ENGINE OIL

8N3033 LINES GP-ENGINE OIL
PART OF 8N3032 FILTER-OIL
c619040 KEBP0069
8N3033 LINES GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your PR-450 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-0076 [3] SEAL-O-RING  
2. 0S-1594 [10] BOLT (3/8-16X1IN)  
3. 0L-2070 [1] BOLT (3/8-16X2.25IN)  
4. 2P-3761 [1] COVER  
  2P-3760 [1] GASKET  
5. 5M-2894 [6] WASHER (2.5MM THK)  
6. 2P-2772 [1] COVER  
7. 4N-0933 [2] GASKET  
8. 2W-8438 [1] TUBE  
9. 0L-1352 [1] BOLT (3/8-16X3.25IN)  
10. 9N-0324 [1] ELBOW-COOLER OUTLET  
11. 109-0078 [4] SEAL-O-RING  
12. 6N-0448 [1] BODY-VALVE & INLET  
13. 9N-0322 [1] TUBE AS-OUTLET  
14. 4N-8150 [1] SPRING  
15. 1P-1367 [1] PLUNGER  
16. 9N-0326 [1] ELBOW  
17. 109-0072 [1] SEAL-O-RING  
18. 0S-1594 B [1] BOLT (3/8-16X1IN)  
  B   USE AS REQUIRED
 

#KEBP00690061
 

8N-3034: LINES GP-ENGINE OIL

8N3034 LINES GP-ENGINE OIL
L.H. FILTER
c616173 KEBP0069
8N3034 LINES GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your PR-450 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-1915 [1] BOLT (3/8 X 16 X 1.375IN)  
2. 5M-2894 [4] WASHER (2.5MM THK)  
3. 123-2894 [1] SUPPORT-SUCTION LINE  
4. 0L-2070 [1] BOLT (3/8 X 16 X 2.25IN)  
5. 0S-1591 [2] BOLT (3/8 X 16 X 1.5IN)  
6. 9L-6842 [1] TUBE AS  
7. 6V-3830 [1] SEAL-O-RING  
8. 0S-1588 [2] BOLT (3/8 X 16 X 1.25IN)  
9. 9N-5917 C [1] TUBE AS-PUMP SUCTION  
10. 109-0072 C [1] SEAL-O-RING  
11. 109-0078 C [1] SEAL-O-RING  
12. 0L-1351 [1] BOLT (3/8 X 16 X .875IN)  
  8M-9024 [1] WASHER-HARD (5MM THK)  
13. 4N-9965 [1] TUBE AS  
14. 0S-1571 [1] BOLT (3/8 X 16 X 1.75IN)  
15. 8N-2104 [1] BELL AS-SUCTION  
16. 9F-2978 [2] NUT-WELD (3/8 X 16 THD)  
17. 4N-0913 [1] SCREEN AS-BELL  
18. 4N-0914 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00690062
 

4N-8734: PUMP GP-ENGINE OIL

4N8734 PUMP GP-ENGINE OIL*R
c551998 KEBP0069
4N8734 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your PR-450 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-0644 [2] BOLT  
  5M-2894 [2] WASHER  
2. 9Y-1792 C [1] RETAINER  
3. 2S-2760 [1] SPRING  
4. 6N-1931 [1] PLUNGER-RELIEF  
5. 7C-6498 C [1] COVER-OIL PUMP  
6. 9Y-4633 C [1] SHAFT AS-OIL PUMP IDLER  
7. 4N-0513 [1] BODY AS-OIL PUMP  
  7N-2156 C [2] BEARING-SLEEVE  
8. 8M-8489 [2] DOWEL  
9. 2P-3205 C [4] BOLT-WASHER HEAD  
10. 9Y-4632 C [1] SHAFT AS-OIL PUMP DRIVE  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00690063
 

4N-2481: FASTENER GP-OIL PUMP MOUNTING

4N2481 FASTENER GP-OIL PUMP MOUNTING
c210186 KEBP0069
4N2481 FASTENER GP-OIL PUMP MOUNTING Parts scheme
  For full view, you need register

Parts for your PR-450 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1143 [2] BOLT  
2. 0S-1590 [1] BOLT  
3. 5M-2894 C [3] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00690064
 

7N-7033: FUMES DISPOSAL GP

7N7033 FUMES DISPOSAL GP
c587681 KEBP0069
7N7033 FUMES DISPOSAL GP Parts scheme
  For full view, you need register

Parts for your PR-450 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1255 E HOSE 7.62 CM(3 IN.)  
2. 9M-2904 [4] CLAMP-HOSE  
3. 2S-2053 [4] CLIP  
4. 7N-8139 [1] TUBE  
5. 0S-1588 [2] BOLT  
  9S-8752 [2] NUT-FULL  
  5M-2894 [4] WASHER  
6. 5P-1255 E HOSE 7.62 CM(3 IN.)  
7. 8N-8138 [1] TUBE-DISPOSAL  
8. 7N-7498 [1] BRACKET  
  E   ORDER BY THE CENTIMETER
 

#KEBP00690065
 

2N-8220: BREATHER GP

2N8220 BREATHER GP-CRANKCASE
c118081 KEBP0069
2N8220 BREATHER GP Parts scheme
  For full view, you need register

Parts for your PR-450 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4668 [1] BREATHER AS (CRANKCASE)  
2. 2N-8109 [1] CLAMP  
3. 4F-7390 [1] SEAL  
 

#KEBP00690066
 

4N-7498: PUMP GP-WATER

4N7498 PUMP GP-WATER*R
ENGINE S/N 67U11094-11797
c226250 KEBP0069
4N7498 PUMP GP-WATER Parts scheme
  For full view, you need register

Parts for your PR-450 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1948 [1] GEAR (43 TEETH)  
2. 1B-7182 [4] BOLT  
3. 9N-3033 C [1] RETAINER  
4. 4S-5898 A [1] SEAL-O-RING  
5. 1D-4717 [4] NUT  
6. 2N-7942 J [1] SPACER  
7. 1B-3867 J [1] BALL BEARING  
8. 5P-1713 [1] SEAL-LIP TYPE  
9. 4N-1956 [1] HOUSING AS-PUMP  
10. 5H-8985 [1] PIN-SPRING  
11. 5M-6214 [1] PLUG-PIPE  
12. 4M-1336 [1] FERRULE  
13. 4N-5834 J [1] FILTER  
14. 5L-5032 A [1] SEAL-O-RING  
15. 4N-5835 A [1] ADAPTER-INLET  
16. 5H-5672 A [1] SEAL-O-RING  
17. 8S-8821 [1] SEAL-IMPELLER  
18. 8S-7762 [1] RING-SEAL  
19. 6N-0139 J [1] SHAFT-WATER PUMP  
20. 9M-6527 J [1] WASHER-HARD  
21. 0S-1591 J [1] BOLT  
22. 4N-1751 [1] IMPELLER-PUMP  
23. 4N-6556 [1] SEAL AS-PUMP  
24. 0S-1594 A [1] BOLT  
25. 2L-5271 J [1] BALL BEARING  
26. 2P-3696 J [1] RETAINER  
27. 1A-1135 J [1] BOLT  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  9N-6289 C [1] KIT-WATER PUMP REBUILD  
    (INCL PARTS MARKED J)
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00690067
 

4N-7498: PUMP GP-WATER

4N7498 PUMP GP-WATER*R
ENGINE S/N 67U11798-UP
c549931 KEBP0069
4N7498 PUMP GP-WATER Parts scheme
  For full view, you need register

Parts for your PR-450 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1948 [1] GEAR (43 TEETH)  
2. 1B-7182 [4] BOLT  
3. 9N-3033 [1] RETAINER  
4. 4S-5898 A [1] SEAL-O-RING  
5. 1D-4717 A [4] NUT  
6. 2N-7942 J [1] SPACER  
7. 1B-3867 J [1] BALL BEARING  
8. 8C-3100 C [1] SEAL-LIP TYPE  
9. 6I-0862 C [1] HOUSING AS-PUMP  
10. 5H-8985 [1] PIN-SPRING  
11. 8T-6764 C [1] PLUG-PIPE  
12. 4M-1336 [1] FERRULE  
13. 4N-5834 [1] FILTER  
14. 6I-0863 [1] HOUSING-WATER PUMP  
15. 7C-1652 A [1] ADAPTER-INLET  
16. 5H-5672 A [1] SEAL-O-RING  
17. 2P-3696 [1] RETAINER  
18. 1A-1135 [1] BOLT  
19. 7W-1821 J [1] SHAFT-WATER PUMP  
20. 9M-6527 J [1] WASHER-HARD  
21. 0S-1591 J [1] BOLT  
22. 7C-1067 C [1] IMPELLER-PUMP  
23. 4W-3864 [1] SEAL GP  
24. 0S-1594 A [1] BOLT  
25. 2L-5271 J [1] BALL BEARING  
26. 5L-5032 A [1] SEAL-O-RING  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  9N-6289 [1] KIT-WATER PUMP REBUILD  
    (INCL PARTS MARKED J)
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00690068
 

4N-1951: PUMP GP-WATER

4N1951 PUMP GP-WATER
1341486-PAGE 38.01
c649867 KEBP0069
4N1951 PUMP GP-WATER Parts scheme
  For full view, you need register

Parts for your PR-450 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-1486 Y [1] PUMP GP-WATER  
2. 112-1579 [1] SEAL-O-RING  
3. 101-2749 [1] ADAPTER-INLET  
4. 9X-7371 [1] SEAL-O-RING  
5. 112-1580 [1] SEAL-O-RING  
6. 9S-8752 [4] NUT-FULL (3/8 X 16 THD)  
7. 0S-1594 [1] BOLT (3/8 X 16 X 1IN)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00690069
 

134-1486: PUMP GP-WATER

1341486 PUMP GP-WATER
PART OF 4N1951 PUMP-WATER
c649856 KEBP0069
1341486 PUMP GP-WATER Parts scheme
  For full view, you need register

Parts for your PR-450 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3790 [1] HOUSING AS-PUMP  
  4M-1336 [1] FERRULE  
  5H-8985 [1] PIN-SPRING  
  8T-6764 [1] PLUG-PIPE  
  111-2721 [1] FILTER  
2. 7C-1067 [1] IMPELLER-PUMP  
3. 118-9163 [1] SEAL GP  
4. 9M-6527 [1] WASHER-HARD  
5. 0S-1591 [1] BOLT  
6. 108-7930 [1] BEARING AS-ROLLER  
7. 8C-3100 [1] SEAL-LIP  
8. 1B-7182 [4] BOLT  
9. 4N-1948 [1] GEAR (43 TEETH)  
10. 1A-1135 [1] BOLT  
11. 133-3572 [1] SHAFT-WATER PUMP  
12. 105-3785 [1] RETAINER  
13. 5S-0581 [1] WASHER-HARD  
 

Information:

Engine News
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group
1979/03/07
Mechanical Shutoff Groups Changed To Prevent Vibration Of Oil Line Tubes
1982/11/10
New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans
1991/06/01
External (Outside) Oil Lines Now Used Instead Of The Oil Passage In The Cylinder Block And Flywheel Housing
1978/05/03
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
A New Integral Seal Provides Improved Sealing {7555}
2003/12/01
Special Instruction
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Disassembly and Assembly
Engine Oil Cooler And Cooler Lines (Marine Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
Mechanical Shutoff Groups Changed To Prevent Vibration Of Oil Line Tubes{7418}
1982/11/08
Repair Of Drain Plug Threads In Oil Pan{1302}
1984/04/23
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans{1302}
1991/06/03
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20

Caterpillar Parts SIS Catalog PR-450 :

GAUGE GP-OIL LEVEL (DIPSTICK)
6N-6959 GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
8N-3920 GAUGE GP-OIL LEVEL (DIPSTICK)
FILTER GP-ENGINE OIL
4N-1409 FILTER GP-ENGINE OIL
8N-3032 FILTER AR-OIL
FILTER GP-ENGINE OIL
4N-1409 FILTER GP-ENGINE OIL
PAN GP-OIL
4N-1733 PAN GP-OIL
COVER GP-OIL PAN
6N-3894 COVER GP-OIL PAN
DRIVE GP-AUXILIARY
7W-6085 DRIVE GP-AUXILIARY
LINES GP-ENGINE OIL
8N-3034 LINES GP-ENGINE OIL
PUMP GP-ENGINE OIL
4N-8734 PUMP GP-ENGINE OIL
FASTENER GP-OIL PUMP MOUNTING
4N-2481 FASTENER GP-OIL PUMP MOUNTING
FUMES DISPOSAL GP
7N-7033 FUMES DISPOSAL GP
BREATHER GP
2N-8220 BREATHER GP
PUMP GP-WATER
4N-7498 PUMP GP-WATER
PUMP GP-WATER
4N-7498 PUMP GP-WATER
PUMP GP-WATER
4N-1951 PUMP GP-WATER

Truck sale:

1986 CAT PR-450
USD $19,500 
1986 CAT PR-450

Earth Sales Group
Sachse, Texas
1989 CAT PR-450
USD $29,000 
1989 CAT PR-450

Earth Sales Group
Sachse, Texas
1987 CAT PR-450
USD $33,000 
1987 CAT PR-450

Gulf Coast Equipment
1991 CAT PR-450
USD $48,000 
1991 CAT PR-450

Rainier Machinery
Graham, Washington
1987 CAT PR-450
USD $39,000 
1987 CAT PR-450

Earth Sales Group
Sachse, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.