AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W0561 PUMP GP-FUEL INJECTION ENGINE S/N 38S13236-UP PART OF 4W6068 PUMP-FUEL INJECTION PR-1000 COLD PLANER


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
GOVERNOR GP
TORQUE CONTROL GP

COLD PLANER PR-1000 COLD PLANER 5XC
 PR-1000 PAVEMENT PROFILER 5XC00001-00137 (MACHINE) POWERED BY 3208,3412 ENGINE KEBP0072 PR-1000 5XC   (1985)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-6068 PUMP GP-FUEL INJECTION
4W-6068 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-0561 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-0101 PUMP GP-FUEL INJECTION
FASTENER GP-GOV,FUEL INJ & TFR
9Y-3336 FASTENER GP-GOV,FUEL INJ & TFR
 

#KEBP00720210
 

7W-0561: PUMP GP-FUEL INJECTION

7W0561 PUMP GP-FUEL INJECTION
ENGINE S/N 38S13236-UP
PART OF 4W6068 PUMP-FUEL INJECTION
c353004 KEBP0072
7W0561 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-9171 [1] BONNET-VALVE  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-6987 [1] VALVE AS-CHECK  
4. 7W-1927 [1] RING-RETAINER  
5. 7W-0182 [1] PLUNGER & BARREL AS  
6. 7C-5278 C [1] BOLT-GEAR  
7. 7N-1066 C [1] WASHER-RETAINER  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00720211
 

4W-0101: PUMP GP-FUEL INJECTION

4W0101 PUMP GP-FUEL INJECTION
ENGINE S/N 38S13236-UP
PART OF 4W6068 PUMP-FUEL INJECTION
c316909 KEBP0072
4W0101 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-9171 [1] BONNET-VALVE  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-6987 [1] VALVE AS-CHECK  
4. 1M-3506 [1] RING-RETAINER  
5. 7N-1208 [1] SPRING-LIFTER  
6. 7N-1066 [1] WASHER-RETAINER  
7. 6N-7828 [1] PLUNGER AS-FUEL PUMP  
8. 8H-9299 [1] SCREW-PLUNGER GEAR  
 

#KEBP00720212
 

7N-6124: HOUSING AS-FUEL PUMP

7N6124 HOUSING AS-PUMP
ENGINE S/N 38S13236-UP
PART OF 4W6068 PUMP-FUEL INJECTION
c334439 KEBP0072
7N6124 HOUSING AS-FUEL PUMP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7266 [1] SHAFT-PUMP IDLER  
2. 7N-0242 C [2] BEARING-SLEEVE  
3. 8L-6565 [1] PIN-SPRING  
4. 4N-0952 C [1] PLUG-CUP  
5. 5B-9318 C [1] BALL  
6. 4M-1474 [1] PIN-LIFTER GUIDE  
7. 9L-9766 [2] PIN-PLUNGER LIFT  
8. 1P-0232 [12] BALL  
  1P-0234 [12] DOWEL  
9. 1S-2199 [1] DOWEL  
10. 9S-4160 [2] BEARING-SLEEVE  
11. 6N-8442 [1] BEARING-SLEEVE  
12. 7M-5839 [1] PLUG-CUP  
13. 6N-8441 [2] BEARING-SLEEVE  
14. 4N-0775 [2] DOWEL-HOLLOW  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00720213
 

4N-1101: PUMP GP-FUEL TRANSFER

4N1101 PUMP GP-FUEL TRANSFER
ENGINE S/N 38S13236-UP
4W5477-PAGE 157.01
PART OF 4W8929 PUMP-GOVERNOR, FUEL INJECTION, FUEL TRANSFER
c499888 KEBP0072
4N1101 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6213 [1] PLUG  
2. 4N-1105 [1] GASKET  
3. 5M-6214 [2] PLUG-PIPE  
4. 4W-5477 CY [1] PUMP GP-FUEL TRANSFER  
5. 0S-1617 [2] BOLT  
6. 4N-7437 [1] PLUG-THREAD O-RING  
  7J-0204 [1] SEAL-O-RING  
7. 4N-1091 [1] HOUSING AS  
8. 2D-8576 [1] BEARING-FLANGE  
9. 4N-1098 [1] SHAFT AS  
10. 4N-1102 [1] GEAR-TRANSFER PUMP DRIVE  
    (11 TEETH)
11. 9S-9332 [1] FITTING-ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00720214
 

4W-5477: PUMP GP-FUEL TRANSFER

4W5477 PUMP GP-FUEL TRANSFER
ENGINE S/N 38S13236-UP
ONE SECTION GEAR
PART OF 4N1101 PUMP-FUEL TRANSFER
c609643 KEBP0072
4W5477 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-2694 [3] BOLT (5/16 X 18 X 2IN)  
2. 4N-1116 [1] SHAFT AS-PUMP  
3. 4N-1119 [1] GEAR-TRANSFER PUMP  
    (10 TEETH)
4. 6V-8977 [1] SEAL-LIP  
5. 5J-5314 [3] BOLT  
6. 7N-6128 [1] COVER-TRANSFER PUMP  
7. 7M-7260 B GASKET-LIQUID  
8. 4W-5476 [1] BODY AS-TRANSFER PUMP  
9. 7S-4433 [1] FERRULE  
10. 1P-2298 [1] VALVE AS  
11. 8F-6058 [1] BEARING  
12. 5P-9294 [1] SEAL-LIP  
13. 4N-7357 [1] BEARING-SLEEVE  
14. 6V-8977 [1] SEAL-LIP  
15. 1W-6177 [1] SHAFT-IDLER  
16. 8S-1925 [1] GEAR-SHAFT DRIVE  
    (11 TEETH)
17. 3H-1489 [1] KEY-WOODRUFF  
18. 2F-8616 [1] LOCKNUT (3/8 X 24 THD)  
19. 6J-2419 [1] SEAL-O-RING  
20. 4N-1119 [1] GEAR-TRANSFER PUMP  
    (10 TEETH)
21. 7S-4440 [1] BOLT  
  4N-7465 [1] GASKET  
22. 6N-1069 [1] SPRING  
23. 2W-3294 [1] PLUNGER AS-VALVE  
24. 3K-8460 [1] PLUG  
  1J-9671 [1] SEAL-O-RING (10.52MM ID)  
25. 4B-4863 [2] WASHER (1.2MM THK)  
  B   USE AS REQUIRED
 

#KEBP00720215
 

4W-7374: PLATE GP-GOVERNOR ADAPTER

4W7374 PLATE GP-GOVERNOR ADAPTER
ENGINE S/N 38S13236-UP
6N1947-PAGE 159
PART OF 4W6013 GOVERNOR
c350858 KEBP0072
4W7374 PLATE GP-GOVERNOR ADAPTER Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-8739 [1] BOLT-LOAD STOP  
2. 1W-4642 [1] RISER-GOVERNOR  
3. 1W-4640 [1] SEAT-SPRING  
4. 2P-8630 [1] DOWEL  
5. 7M-7193 [1] RACE-BEARING-THRUST  
6. 7M-7219 [1] BEARING-THRUST  
7. 3K-0810 [1] RING-LOCK  
8. 6N-7818 [1] LOCK-RING  
9. 5P-5601 [2] SEAL-O-RING  
10. 9S-8008 [1] PLUG-O-RING  
  3D-2824 [1] SEAL-O-RING  
11. 4W-2169 [1] PLATE AS-ADAPTER  
  6N-3175 [1] DOWEL  
12. 4N-0898 [1] DOWEL-HOLLOW  
13. 9M-2089 [1] DOWEL  
14. 7N-0579 [1] BEARING-SLEEVE  
15. 6N-8195 [1] RACE-THRUST  
16. 4W-7653 [1] BOLT-GROUND BODY  
17. 6N-1947 Y [1] PISTON GP-GOVERNOR SERVO  
18. 2S-0007 [1] SLEEVE-PILOT  
19. 9M-6302 [2] WASHER  
  9M-6303 [1] SPRING  
20. 7N-2351 [1] PIN-CONTROL  
21. 034-4160 [2] BOLT-SELF LOCKING  
22. 8M-6393 [1] RING-RETAINING  
23. 6N-8783 [1] GEAR (42 TEETH)  
24. 9L-6509 [1] WEIGHT AS-GOVERNOR  
25. 1S-5440 [2] DOWEL  
26. 9L-4989 [2] WEIGHT-GOVERNOR  
27. 9N-3323 [1] BRACKET AS-CONTROL (RACK)  
28. 2S-7316 C [1] DOWEL  
29. 7W-7129 C [1] LEVER-RACK  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00720216
 

9Y-3336: FASTENER GP-GOV,FUEL INJ & TFR

9Y3336 FASTENER GP
ENGINE S/N 38S13236-UP
PART OF 4W8929 PUMP-GOVERNOR, FUEL INJECTION, FUEL TRANSFER
c454529 KEBP0072
9Y3336 FASTENER GP-GOV,FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [4] BOLT  
2. 0S-1591 [2] BOLT  
3. 0S-1571 [4] BOLT  
4. 0L-1143 [1] BOLT  
5. 053-2294 [1] BOLT-12 POINT HEAD  
6. 3B-1915 [4] BOLT  
 

#KEBP00720217
 

6N-1947: PISTON GP-GOVERNOR SERVO

6N1947 PISTON GP-GOVERNOR SERVO
ENGINE S/N 38S13236-UP
PART OF 4W7374 GOVERNOR ADAPTER PLATE
c230564 KEBP0072
6N1947 PISTON GP-GOVERNOR SERVO Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1807 [1] CYLINDER-SERVO  
2. 5P-9757 C [1] SEAL-O-RING  
3. 8N-6983 C [1] SLEEVE  
4. 8N-6979 C [1] PISTON & VALVE AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00720218
 

4N-4267: TORQUE CONTROL GP

4N4267 TORQUE CONTROL GP
ENGINE S/N 38S13236-UP
PART OF 4W8929 PUMP-GOVERNOR, FUEL INJECTION, FUEL TRANSFER
c228212 KEBP0072
4N4267 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7957 [2] BOLT  
2. 9M-6292 [1] LOCK-NUT  
3. 4N-4218 [1] CONTACT  
4. 2S-7391 [1] BAR-STOP  
5. 8M-9062 [1] RETAINER-SPRING  
6. 1P-9958 C [1] INSULATOR  
7. 3S-0602 [1] RETAINER-SPRING  
8. 1P-6452 [1] INSULATOR  
9. 9L-7235 C [1] SHIM-TORQUE SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00720219
 

6N-0509: TORQUE CONTROL GP

6N0509 TORQUE CONTROL GP
ENGINE S/N 3Z4000-UP
PART OF 4W5621, 7C9496, 4W5639 & 7C8973 GOVERNOR & FUEL INJECTION PUMP
c456524 KEBP0072
6N0509 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6452 [2] INSULATOR  
2. 8M-9064 [1] SHIM-SPRING  
3. 4L-7124 [1] BOLT  
4. 4N-3882 [1] CONTACT-STOP  
5. 4N-3881 [1] SCREW  
6. 9M-1311 [1] NUT-JAM  
7. 4N-3884 [1] WASHER-SPRING  
8. 4N-3883 [1] BAR-LOAD STOP  
9. 4L-6458 [1] NUT-FULL  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies
1979/06/20
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations
1981/04/01
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/22
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Explanation Of Differences In Timing Advance Information
1981/08/26
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System
1981/08/26
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure
1982/09/22
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/11/30
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
Tune-Up Kit And Remanufactured Nozzles Available
1984/09/12
Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles
1984/10/24
Identification Of Camshaft Groups And Valve Mechanism Groups
1984/12/12
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups
1985/04/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Fuel Injection Timing Adjustment
1987/05/01
Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
New Torque Procedure for the Bushings that Retain the Fuel Injection Pumps (Specifications Manuals) {1251}
2001/10/01
New Torque Procedure for the Bushings that Retain the Fuel Injection Pumps (Testing and Adjusting Manuals) {1251}
2001/10/01
New Torque Procedure for the Bushings that Retain the Fuel Injection Pumps (Disassembly and Assembly Manuals) {1251}
2001/10/01
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Special Instruction
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Australia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-CFEL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-CSARL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Americas
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Brazil
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Technical Information Bulletin
Fuel Leaks on the Fuel Injection Pumps on 3208 Applications
Fuel Leaks on the Fuel Injection Pumps on 3208 Applications
Specifications
Fuel Injection Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Injection Nozzle<BR> (9N3979 and 1W5829)
3208 INDUSTRIAL ENGINE
Automatic Timing Advance Unit
3208 INDUSTRIAL ENGINE
Drive Gear For The Injection Pump
3208 INDUSTRIAL ENGINE
Valves
3208 INDUSTRIAL ENGINE
Fuel Injection Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Fuel Injection Nozzles
3208 INDUSTRIAL ENGINE
Automatic Timing Advance Unit
3208 INDUSTRIAL ENGINE
Drive Gear For The Injection Pump
3208 INDUSTRIAL ENGINE
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Asia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Information Release Memo
PRODUCT LINE ADDITION: REMAN FUEL INJECTORS AND NOZZLES FOR CERTAIN 3126, 3208, 3406, 3412, 3508, 3512, 3516, C9, C15, C18, C32 ENGINES
PRODUCT LINE ADDITION: REMAN FUEL INJECTORS AND NOZZLES FOR CERTAIN 3126, 3208, 3406, 3412, 3508, 3512, 3516, C9, C15, C18, C32 ENGINES
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing
3208 INDUSTRIAL ENGINE
Check Valve And Bypass Valve
3208 INDUSTRIAL ENGINE
Fuel Injection Pumps
3208 INDUSTRIAL ENGINE
Rocker Shafts And Push Rods
3208 INDUSTRIAL ENGINE
Rocker Shafts
3208 INDUSTRIAL ENGINE
Fuel Injection Nozzles
3208 INDUSTRIAL ENGINE
Automatic Timing Advance
3208 INDUSTRIAL ENGINE
Fuel Injection Nozzles
3208 INDUSTRIAL ENGINE
Rocker Shaft Assemblies &amp; Push Rods
3208 INDUSTRIAL ENGINE
Rocker Shaft Assemblies
3208 INDUSTRIAL ENGINE
Governor &amp; Fuel Pump Drive
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing &amp; Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing
3208 INDUSTRIAL ENGINE
Shutoff Housing, Check Valve &amp; Bypass Valve
3208 INDUSTRIAL ENGINE
Fuel Injection Pumps
3208 INDUSTRIAL ENGINE
Service Magazine
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
High Concentration Of Aluminum In Oil Analysis Can Be The Result Of Rocker Arm Support Wear{1318,1102}
1981/03/02
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Use Correct Torque To Prevent Broken Rocker Arm Shafts{1102}
1982/07/05
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure{1254}
1982/08/09
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
New Thrust Washer Can Prevent Wrong Oil Sample Readings{1102}
1982/08/23
New Rocker Arm Assemblies Used {1102}
1982/09/13
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles{1254}
1984/10/22
Identification Of Camshaft Groups And Valve Mechanism Groups{1210,1102}
1984/11/26
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies{0652,1254}
1979/06/11
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Compression Ratio Increased On Remanufactured OR1094 &amp; OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
New Spring Used In Governor Control Groups{1265}
1992/04/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog PR-1000 :

4W-6068 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-6068 PUMP GP-FUEL INJECTION
4W-6068 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-6068 PUMP GP-FUEL INJECTION
4W-6013 GOVERNOR GP
GOVERNOR GP
4W-6013 GOVERNOR GP
4W-6013 GOVERNOR GP
GOVERNOR GP
4W-6013 GOVERNOR GP
PUMP GP-FUEL INJECTION
4W-0101 PUMP GP-FUEL INJECTION
HOUSING AS-FUEL PUMP
7N-6124 HOUSING AS-FUEL PUMP
PUMP GP-FUEL TRANSFER
4N-1101 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
4W-5477 PUMP GP-FUEL TRANSFER
PLATE GP-GOVERNOR ADAPTER
4W-7374 PLATE GP-GOVERNOR ADAPTER
FASTENER GP-GOV,FUEL INJ & TFR
9Y-3336 FASTENER GP-GOV,FUEL INJ & TFR
PISTON GP-GOVERNOR SERVO
6N-1947 PISTON GP-GOVERNOR SERVO
TORQUE CONTROL GP
4N-4267 TORQUE CONTROL GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.