AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

100-4948 CYLINDER BLOCK GP S/N 98Z13709-17019 PART OF 2W-9746 CYLINDER BLOCK GP AP-1050 ASPHALT PAVER


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

ASPHALT PAVER AP-1050 ASPHALT PAVER 1JG
 AP-1050 Asphalt Paver 1JG00001-UP (MACHINE) POWERED BY 3116 Engine KEBP0077 AP-1050 1JG   (1989)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
7C-0299 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
 

#KEBP00770020
 

100-4948: CYLINDER BLOCK GP

100-4948 CYLINDER BLOCK GP
S/N 98Z13709-17019
PART OF 2W-9746 CYLINDER BLOCK GP
i00122924 KEBP0077
1004948 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-6289 [1] CYLINDER BLOCK AS  
1A. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
1B. 9X-8916 M [14] BOLT (M16X2X140-MM)  
1C. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
2. 2M-9780 [1] SEAL-O-RING  
3. 2W-7211 [1] BUSHING (CAMSHAFT)  
4. 2M-6471 [2] PLUG-CUP  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 B [2] SEAL-O-RING  
9. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP00770021
 

129-1095: CYLINDER BLOCK GP

129-1095 CYLINDER BLOCK GP
S/N 98Z17020-99999
PART OF 2W-9746 CYLINDER BLOCK GP
i00089963 KEBP0077
1291095 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 B [2] SEAL-O-RING  
9. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP00770022
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 98Z1-13708
PART OF 112-1684, 6I-3039 ENGINE AR
FOR USE WITH ONE-PIECE PISTONS
i00122058 KEBP0077
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5826 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [4] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP00770023
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 98Z13709-17019
PART OF 112-1684 ENGINE AR
FOR USE WITH ONE-PIECE PISTONS
i00122059 KEBP0077
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4948 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP00770024
 

2W-9746: CYLINDER BLOCK GP

2W-9746 CYLINDER BLOCK GP
S/N 98Z17020-UP
PART OF 112-1684 ENGINE AR
FOR USE WITH ONE-PIECE PISTONS
i00122060 KEBP0077
2W9746 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-1095 YC [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-2457 [6] JET AS-PISTON COOLING  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP00770025
 

7C-5826: CYLINDER BLOCK GP

7C-5826 CYLINDER BLOCK GP
S/N 98Z1-13708
PART OF 2W-9746 CYLINDER BLOCK GP
i00122272 KEBP0077
7C5826 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 [2] SEAL-O-RING  
9. 9S-8008 [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
   
  7C-6208 AF [1] SLEEVE-CYLINDER  
    (FOR SALVAGE OF DAMAGED CYL. BORES IN BLOCK. QUANTITY TO BE DETERMINED BY USER.)
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  M   METRIC PART
 

#KEBP00770026
 

115-4107: CYLINDER HEAD AS

115-4107 CYLINDER HEAD AS
S/N 98Z7633-UP
PART OF 115-4108 CYLINDER HEAD AS, 115-4165 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@126-0445@@@@@, @@@@@140-7373@@@@@
i00157980 KEBP0077
1154107 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-7610 [1] CYLINDER HEAD  
2. 1W-2713 [6] INSERT-VALVE SEAT (EXHAUST)  
3. 7W-8065 [6] INSERT-VALVE SEAT (INLET)  
4. 119-3061 [6] SLEEVE  
5. 8M-5860 [6] PLUG-CUP  
 

#KEBP00770027
 

115-4108: CYLINDER HEAD AS

115-4108 CYLINDER HEAD AS
S/N 98Z7633-UP
FIELD REPLACEMENT FOR @@@@@115-4107@@@@@
i00157981 KEBP0077
1154108 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-4107 Y [1] CYLINDER HEAD AS  
2. 9S-8003 [3] PLUG (1/2-20-THD)  
3. 1J-9671 [3] SEAL-O-RING  
4. 2M-6471 [2] PLUG-CUP  
5. 119-3036 [12] SEAL-VALVE STEM  
6. 9Y-8848 [12] GUIDE-VALVE  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00770028
 

126-0445: CYLINDER HEAD AS

126-0445 CYLINDER HEAD AS
S/N 98Z7633-UP
FIELD REPLACEMENT FOR @@@@@126-5867@@@@@, @@@@@115-4107@@@@@
i00513225 KEBP0077
1260445 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-8848 [12] GUIDE-VALVE  
2. 9S-8003 [3] PLUG (1/2-20-THD)  
3. 1J-9671 [3] SEAL-O-RING  
4. 2M-6471 [2] PLUG-CUP  
5. 119-3036 [12] SEAL-VALVE STEM  
6. 126-5867 Y [1] CYLINDER HEAD AS  
7. 3J-7354 [1] SEAL-O-RING  
8. 9S-8002 [1] PLUG (7/16-20-THD)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00770029
 

126-5867: CYLINDER HEAD AS

126-5867 CYLINDER HEAD AS
S/N 98Z7633-UP
PART OF 126-0445 CYLINDER HEAD AS
FIELD REPLACEMENT FOR @@@@@126-0445@@@@@
i00514796 KEBP0077
1265867 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your AP-1050 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2713 [6] INSERT-VALVE SEAT (EXHAUST)  
2. 169-6862 [6] INSERT-VALVE SEAT (INLET)  
3. 119-3061 [6] SLEEVE  
4. 8M-5860 [6] PLUG-CUP  
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation of 7C-6208 Cylinder Sleeve {1222}
Installation of 7C-6208 Cylinder Sleeve {1222}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Piston Cooling Jet
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Cylinder Block Cover Group
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Main Bearing Journal
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Troubleshooting
Engine Has Early Wear
3114, 3116 and 3126 Engines
Excessive Engine Oil Consumption
3114, 3116 and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Thicker Head Gaskets Available For Use With Resurfaced Cylinder Blocks{1124}
1992/10/05
Oversize Pistons Not Available{1214,1216}
1993/04/05
Use Of 4C-4377 Stress Plate Group In 3114 And 3116 Cylinder Block Reconditioning{0672,0673,1201}
1994/09/05
Lubricant Used On Cylinder Head Bolts Changed{1100}
1996/02/05
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
Thicker Head Gasket Available For Cylinder Block Salvage Procedure {1124}
1997/12/22
Cylinder Sleeve Available For Reconditioning Cylinder Blocks {1222}
1997/12/22
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
New Main Bearing Material{1203}
1999/05/24

Caterpillar Parts SIS Catalog AP-1050 :

CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
COVER GP-CYLINDER BLOCK
7C-0299 COVER GP-CYLINDER BLOCK
CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
CAMSHAFT GP
2W-9608 CAMSHAFT GP
ENGINE AR
7R-4410 ENGINE AR
ENGINE AR
7R-4410 ENGINE AR
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-9746 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
CYLINDER HEAD AS
115-4107 CYLINDER HEAD AS
CYLINDER HEAD AS
115-4108 CYLINDER HEAD AS
CYLINDER HEAD AS
126-0445 CYLINDER HEAD AS

Truck sale:

Caterpillar AP-1050
 
Caterpillar AP-1050
- Asphalt Pavers
WAGNER EQUIPMENT CO
Caterpillar AP-1050, Construction
30,142 
Caterpillar AP-1050, Construction
- Asphalt pavers
FINNING CANADA
Canada
CATERPILLAR AP-1050 1990
 
CATERPILLAR AP-1050 1990
- ASPHALT PAVERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
CATERPILLAR AP-1050 1996
 
CATERPILLAR AP-1050 1996
- ASPHALT PAVERS
Please Contact your local Cat Dealer
Brazil
CATERPILLAR AP1050 1991
$19,000 USD 
CATERPILLAR AP1050 1991
- ASPHALT PAVERS
EMPIRE MACHINERY CO
1725 South Country Club Drive - Mesa -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.