AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N-0922 CRANKSHAFT GP S/N 73W20718-UP PART OF 123-0204 ENGINE AR PR-1000 COLD PLANER


BASIC ENGINE
CRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER HEAD GP

COLD PLANER PR-1000 COLD PLANER 5XC
 PR-1000C Cold Planer 5XC00138-UP (MACHINE) POWERED BY 3208 Engine KEBP0082 PR-1000 5XC   (1985)

BASIC ENGINE

CRANKSHAFT GP
ADAPTER GP-SEAL
3N-2915 ADAPTER GP-SEAL
CRANKSHAFT AS
384-9906 CRANKSHAFT AS
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
CRANKSHAFT GP
9Y-7606 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
9N-0542 SEAL GP-CRANKSHAFT
 

#KEBP00820030
 

4N-0922: CRANKSHAFT GP

4N-0922 CRANKSHAFT GP
S/N 73W20718-UP
PART OF 123-0204 ENGINE AR
i02302821 KEBP0082
4N0922 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 384-9906 CY [1] CRANKSHAFT AS  
2. 317-8766 J [7] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
3. 253-1752 J [2] PLATE-THRUST  
4. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)  
5. 319-7401 Y [1] SEAL GP-CRANKSHAFT (FRONT)  
   
    AVAILABLE REPAIR KIT(S):
  243-6718 AJ KIT-CRANKSHAFT BEARING (STANDARD)  
    (INCLUDES A COMPLETE SET OF MAIN BEARING & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820031
 

9Y-7606: CRANKSHAFT GP

9Y-7606 CRANKSHAFT GP
S/N 79V25019-UP
PART OF 130-4005 ENGINE AR
i00446517 KEBP0082
9Y7606 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-7605 [1] CRANKSHAFT AS  
2. 9N-6677 [1] KEY-CRANKSHAFT  
3. 9Y-5215 [1] GEAR-CRANKSHAFT (40 TEETH)  
4. 4W-8092 J [3] BEARING-MAIN  
  8N-9021 AB BEARING-MAIN (0.25-MM OS)  
5. 4W-8091 J [1] BEARING-THRUST  
  8N-9067 AB BEARING-THRUST (0.25-MM OS)  
6. 4W-8093 J [1] BEARING-MAIN  
  8N-8973 AB BEARING-MAIN (0.25-MM OS)  
   
    AVAILABLE REPAIR KIT(S):
  9Y-6202 J KIT-BASIC ENGINE REPAIR (MAIN BEARING)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   REPAIR KIT MARKED J IS AVAILABLE FOR PART (S) MARKED J
 

#KEBP00820032
 

126-1372: CYLINDER BLOCK AS

126-1372 CYLINDER BLOCK AS
S/N 73W1-UP
PART OF 126-1375 CYLINDER BLOCK AS
i00089937 KEBP0082
1261372 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
2. 485-1966 [7] CAP-CRANKSHAFT  
3. 4N-6658 [2] BUSHING (1.3-IN WIDE)  
4. 4N-0685 [5] BUSHING (1-IN WIDE)  
5. 7W-6492 [2] PLUG-PIPE (1/2-14-THD)  
6. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
   
  4W-4588 AFJN SLEEVE-LIFTER BORE  
  4W-6061 AFLN SLEEVE  
  2W-3815 AFJN INSERT-LINER SEAT (1.605-MM THK)  
  6I-4363 AFJN INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 AFJN INSERT-LINER SEAT (1.655-MM THK)  
  5N-0093 AFJN INSERT-LINER SEAT (2.71-MM THK)  
  6I-4365 AFJN INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 AFJN INSERT-LINER SEAT (2.76-MM THK)  
  9Y-3368 AFJN INSERT-LINER SEAT (0.822-MM THK)  
  6I-4361 AFJN INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 AFJN INSERT-LINER SEAT (0.872-MM THK)  
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  J   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  L   FOR SALVAGE OF THE BOTTOM LINER O-RING BORE
  N   QUANTITY TO BE DETERMINED BY USER
 

#KEBP00820033
 

126-1375: CYLINDER BLOCK AS

126-1375 CYLINDER BLOCK AS
S/N 73W1-UP
PART OF 4N-1201 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER 12- 7W-4990 TUBE AS-OIL JET, 12-111-8606 BOLT-OIL JET
i00513529 KEBP0082
1261375 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-1372 Y [1] CYLINDER BLOCK AS  
2. 9L-5854 [12] BAND-FILLER (130.2-MM ID)  
3. 197-9322 [12] LINER-CYLINDER BLOCK  
4. 110-2220 [12] SEAL-LINER  
5. 142-7072 [12] SEAL-LINER  
6. 142-6217 [12] SEAL-O-RING  
  4W-4588 ABFJ SLEEVE-LIFTER BORE  
  4W-6061 ABFL SLEEVE  
  2W-3815 ABFJ INSERT-LINER SEAT (1.605-MM THK)  
  5N-0093 ABFJ INSERT-LINER SEAT (2.71-MM THK)  
  9Y-3368 ABFJ INSERT-LINER SEAT (0.822-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  J   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  L   FOR SALVAGE OF THE BOTTOM LINER O-RING BORE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820034
 

7E-0036: CYLINDER BLOCK AS

7E-0036 CYLINDER BLOCK AS
S/N 79V1-UP; 03Z8500-99999
PART OF 7E-4850, 9N-6356 CYLINDER BLOCK GP
i00395767 KEBP0082
7E0036 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3H-5552 [6] PLUG-CUP  
2. 9L-7831 [10] BOLT  
3. 9L-9009 [10] WASHER (0.594X1.062X0.188-IN THK)  
4. 9N-3759 [5] CAP-CRANKSHAFT BEARING  
 

#KEBP00820035
 

4N-1201: CYLINDER BLOCK GP

4N-1201 CYLINDER BLOCK GP
S/N 73W1-UP
PART OF 123-0204 ENGINE AR
i00108664 KEBP0082
4N1201 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4990 [12] JET AS-PISTON COOLING  
2. 4N-1650 [4] DOWEL  
3. 8T-6763 [4] PLUG-PIPE (1/4-18-THD)  
4. 126-1375 Y [1] CYLINDER BLOCK AS  
5. 8T-6757 [5] PLUG-PIPE  
6. 225-3101 C [2] GASKET-PLATE  
7. 225-3100 C [2] PLATE-SPACER  
8. 4N-0693 [3] PLUG-TAPERLOCK (1-1/2-12-THD)  
    -OR-
  7C-9614 [3] PLUG-TAPERLOCK (1-5/8-12-THD)  
9. 4N-0683 [4] DOWEL  
11. 3B-0645 [1] PLUG-CUP  
12. 6L-4428 [3] STUD-TAPERLOCK (3/8-16X4.01-IN)  
14. 5P-8356 [4] SEAL-O-RING  
15. 3S-6605 [2] PLUG-CUP  
16. 111-8606 [12] BOLT-SPECIAL (OIL JET)  
18. 7C-7407 [1] STUD  
   
  101-0523 ABFN INSERT-LINER SEAT (5.21-MM THK)(STANDARD)  
  101-0524 ABFN INSERT-LINER SEAT (5.16-MM THK)(0.5-MM US)  
  101-0525 ABFN INSERT-LINER SEAT (5.26-MM THK)(0.5-MM OS)  
  9Y-3368 ABFN INSERT-LINER SEAT (0.822-MM THK)(STANDARD)  
  6I-4361 ABFN INSERT-LINER SEAT (0.772-MM THK)(0.05-MM US)  
  6I-4362 ABFN INSERT-LINER SEAT (0.872-MM THK)(0.05-MM OS)  
  2W-3815 ABFN INSERT-LINER SEAT (1.605-MM THK)(STANDARD)  
  6I-4363 ABFN INSERT-LINER SEAT (1.555-MM THK)(0.05-MM US)  
  6I-4364 ABFN INSERT-LINER SEAT (1.655-MM THK)(0.05-MM OS)  
  5N-0093 ABFN INSERT-LINER SEAT (2.71-MM THK)(STANDARD)  
  6I-4365 ABFN INSERT-LINER SEAT (2.66-MM THK)(0.05-MM US)  
  6I-4366 ABFN INSERT-LINER SEAT (2.76-MM THK)(0.05-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  N   FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820036
 

7E-4850: CYLINDER BLOCK GP

7E-4850 CYLINDER BLOCK GP
S/N 79V1-UP; 03Z8552-99999
FIELD REPLACEMENT FOR @@@@@ 9N-6356@@@@@
i00405377 KEBP0082
7E4850 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-8002 [8] DOWEL-HOLLOW  
2. 4K-8603 [1] PLUG-CUP  
3. 4D-1322 [1] RING-RETAINING  
4. 9N-5246 [5] BEARING-CAMSHAFT  
5. 2B-0858 [1] PLUG-PIPE  
6. 9L-6065 Y [1] COVER GP-CYLINDER BLOCK  
7. 7E-0036 Y [1] CYLINDER BLOCK AS  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820037
 

9N-6356: CYLINDER BLOCK GP

9N-6356 CYLINDER BLOCK GP
S/N 79V25019-UP
PART OF 130-4005 ENGINE AR
FIELD REPLACEMENT ORDER @@@@@ 7E-4850@@@@@
i00439003 KEBP0082
9N6356 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-0036 CY [1] CYLINDER BLOCK AS  
2. 9N-5246 [5] BEARING-CAMSHAFT  
3. 8M-3023 [8] ORIFICE-JET  
4. 2B-0858 [1] PLUG-PIPE  
5. 9L-8002 [8] DOWEL-HOLLOW  
6. 3B-0623 C [1] PLUG-CUP  
7. 4D-1322 [1] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820038
 

143-0046: CYLINDER HEAD AS

143-0046 CYLINDER HEAD AS
S/N 38S18722-UP; 73W13236-UP
PART OF 143-0047, 7W-2243 CYLINDER HEAD AS
FIELD REPLACEMENT ORDER @@@@@143-0047@@@@@
i00562988 KEBP0082
1430046 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [10] PLUG-CUP  
2. 4N-5893 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 3B-0623 [12] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#KEBP00820039
 

143-0047: CYLINDER HEAD AS

143-0047 CYLINDER HEAD AS
S/N 38S18722-UP; 73W18062-UP
PART OF 141-3228 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@143-0046@@@@@
i00566897 KEBP0082
1430047 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0046 Y [1] CYLINDER HEAD AS  
2. 173-7188 [24] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Comparison And Applications Of Six And Eight Counterweight Crankshafts
1981/09/16
Bolt Torque Specifications Changed For Crankshaft Pulley And Power Take-Off Adapter
1981/10/21
New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve
1982/02/10
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
New Specifications For Installation Of Crankshaft Counterweight Bolts
1983/04/27
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings
1983/09/14
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
New Rear Crankshaft Seal Has Longer Service Life
1985/02/01
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Put Grease On Front Crankshaft Seal Before Installing The Crankshaft Pulley And Damper
1986/01/01
New Front Crankshaft Seal Requires New Installer Tool
1989/06/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
A New Type of Main Bearing is Now Used {1203}
2013/03/01
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
3208 INDUSTRIAL ENGINE
Crankshaft Seals
3208 INDUSTRIAL ENGINE
Crankshaft
3208 INDUSTRIAL ENGINE
Tool Operating Manual
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Main Bearings
3208 INDUSTRIAL ENGINE
Crankshaft Pulley
3208 INDUSTRIAL ENGINE
Crankshaft Front Seal
3208 INDUSTRIAL ENGINE
Crankshaft Rear Seal And Wear Sleeve
3208 INDUSTRIAL ENGINE
Crankshaft And Gear
3208 INDUSTRIAL ENGINE
Crankshaft Pulley
3208 INDUSTRIAL ENGINE
Crankshaft Front Seal
3208 INDUSTRIAL ENGINE
Crankshaft Main Bearings
3208 INDUSTRIAL ENGINE
Crankshaft Rear Seal & Wear Sleeve
3208 INDUSTRIAL ENGINE
Crankshaft & Gear
3208 INDUSTRIAL ENGINE
Service Magazine
Comparison And Applications Of Six And Eight Counterweight Crankshafts{1202,1156}
1981/08/17
Bolt Torque Specifications Changed For Crankshaft Pulley And Power Take-Off Adapter{1205,1165}
1981/10/05
New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/01/25
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings{1202,1203,1400,1405}
1982/06/21
New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve{1161}
1982/10/18
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Check Cylinder Bores For Chamfer During Reconditioning{1202,1222,1223}
1983/02/14
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
New Rear Crankshaft Seal Has Longer Service Life{1161}
1985/01/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Put Grease On Front Crankshaft Seal Before Installing The Crankshaft Pulley And Damper{1160}
1986/01/13
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
All Three Main Bearing Part Numbers Stamped On Lower Portion Of Standard Size Bearing {1203}
1987/06/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Front Crankshaft Seal Requires New Installer Tool {1160,1202,0704}
1989/05/22
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog PR-1000 :

CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
CRANKSHAFT GP
4N-0922 CRANKSHAFT GP
CRANKSHAFT AS
384-9906 CRANKSHAFT AS
COVER GP-VALVE MECHANISM
8N-0913 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
7W-4184 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4W-6968 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4W-2581 COVER GP-VALVE MECHANISM
COVER GP-OIL PAN
6N-1400 COVER GP-OIL PAN
CRANKSHAFT GP
9Y-7606 CRANKSHAFT GP
CYLINDER BLOCK AS
126-1372 CYLINDER BLOCK AS
CYLINDER BLOCK AS
126-1375 CYLINDER BLOCK AS
CYLINDER BLOCK AS
7E-0036 CYLINDER BLOCK AS
CYLINDER BLOCK GP
4N-1201 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-4850 CYLINDER BLOCK GP
CYLINDER BLOCK GP
9N-6356 CYLINDER BLOCK GP
CYLINDER HEAD AS
143-0046 CYLINDER HEAD AS

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.