AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-2296 CYLINDER HEAD AS S/N 79V1-UP PART OF 7C-3807 CYLINDER HEAD AS, 1W-2282 CYLINDER HEAD GP FIELD REPLACEMENT ORDER @@@@@ 7C-3807@@@@@ PR-1000


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP

COLD PLANER PR-1000 COLD PLANER 5XC
 PR-1000C Cold Planer 5XC00138-UP (MACHINE) POWERED BY 3208 Engine KEBP0082 PR-1000 5XC   (1985)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD AS
143-0046 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
CYLINDER HEAD AS
7C-2296 CYLINDER HEAD AS
CYLINDER HEAD AS
7C-3807 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
CYLINDER HEAD GP
141-3228 CYLINDER HEAD GP
 

#KEBP00820040
 

7C-2296: CYLINDER HEAD AS

7C-2296 CYLINDER HEAD AS
S/N 79V1-UP
PART OF 7C-3807 CYLINDER HEAD AS, 1W-2282 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7C-3807@@@@@
i00196555 KEBP0082
7C2296 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] HEAD  
2. 8M-5860 [4] PLUG-CUP  
3. 9N-2837 [4] INSERT-VALVE SEAT (EXHAUST)  
4. 2N-8943 [4] INSERT-VALVE SEAT (INLET)  
  Z   NOT SERVICED SEPARATELY
 

#KEBP00820041
 

7C-3807: CYLINDER HEAD AS

7C-3807 CYLINDER HEAD AS
S/N 79V1-UP; 03Z8500-UP
FIELD REPLACEMENT FOR @@@@@ 7C-2296@@@@@
i00406000 KEBP0082
7C3807 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-2296 Y [1] CYLINDER HEAD AS  
2. 9L-7657 [1] PLUG-CUP  
3. 8T-6765 [2] PLUG-PIPE (1/4-18-THD)  
4. 6H-1717 [2] BOLT (1/2-13X1.125-IN)  
5. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
7. 8F-6575 [4] PLUG-CUP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820042
 

7W-2243: CYLINDER HEAD AS

7W-2243 CYLINDER HEAD AS
S/N 73W1-18061
PART OF 7W-2242 CYLINDER HEAD GP
i00089706 KEBP0082
7W2243 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0046 CY [1] CYLINDER HEAD AS  
2. 173-7188 [24] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
3. 2N-5775 [12] DOWEL  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820043
 

141-3228: CYLINDER HEAD GP

141-3228 CYLINDER HEAD GP
S/N 73W18062-UP
PART OF 4W-7007 CYLINDER HEAD GP
i00566483 KEBP0082
1413228 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0047 Y [1] CYLINDER HEAD AS  
2. 122-0322 [12] VALVE-INLET  
3. 2A-4429 [48] LOCK-RETAINER  
4. 6N-7175 [24] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
5. 4N-5906 [24] SPRING-VALVE  
6. 122-0321 [12] VALVE-EXHAUST  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820044
 

1W-2282: CYLINDER HEAD GP

1W-2282 CYLINDER HEAD GP
S/N 79V1-UP
PART OF 9N-3600 CYLINDER HEAD GP
i00355908 KEBP0082
1W2282 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5496 [8] SPRING-VALVE OUTER  
2. 9N-5495 [8] SPRING-VALVE INNER  
3. 9N-5497 [8] RETAINER-VALVE SPRING  
4. 2A-4429 [16] LOCK-RETAINER  
5. 1W-9897 [8] WASHER-SPRING  
6. 119-6772 [4] VALVE-EXHAUST  
7. 9L-7682 [4] VALVE-INLET  
8. 7C-2296 CY [1] CYLINDER HEAD AS  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820045
 

4W-7007: CYLINDER HEAD GP

4W-7007 CYLINDER HEAD GP
S/N 73W1-18061
PART OF 123-0204 ENGINE AR
i00108703 KEBP0082
4W7007 CYLINDER HEAD GP Parts scheme 4W7007 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8071 C [1] BRACKET-FUEL PUMP  
2. 3B-1915 C [1] BOLT (3/8-16X1.375-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1608 C [1] BOLT (3/8-16X3.75-IN)  
5. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
6. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
7. 6N-6733 [1] SUPPORT-HOUSING  
8. 7E-7312 [2] GASKET-CYLINDER HEAD  
9. 2H-3750 C [40] BOLT (3/4-16X7.5-IN)  
10. 5H-1504 [40] WASHER-HARD (20X33.5X5-MM THK)  
11. 7W-2242 Y [2] CYLINDER HEAD GP  
12. 0L-1352 C [14] BOLT (3/8-16X3.25-IN)  
13. 0L-1352 CB [5] BOLT (3/8-16X3.25-IN)  
14. 8T-6764 C [1] PLUG-PIPE (1/8-27-THD)  
15. 4N-0932 [2] PLUG-CUP  
16. 5P-0063 B [4] PLUG-CUP  
17. 4N-7253 C [12] GASKET-CHAMBER  
18. 3E-6772 C [48] SEAL (WATER)  
19. 106-1792 C [24] STUD-TAPERLOCK (3/8-16X4-IN)  
20. 7X-7731 C [2] PLUG-PIPE (3/4-14-THD)  
21. 8T-6762 C [5] PLUG-PIPE (1/2-14-THD)  
22. 8T-6762 CB [1] PLUG-PIPE (1/2-14-THD)  
23. 8T-6764 CB [1] PLUG-PIPE (1/8-27-THD)  
24. 6N-6734 [1] SUPPORT-HOUSING  
25. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
26. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
27. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
29. 8S-9191 [2] BOLT (3/8-16X4-IN)  
30. 1W-5207 [1] BRACKET-FUEL PUMP  
31. 8M-5249 C [12] SEAL-O-RING  
32. 100-6920 C [12] ADAPTER-NOZZLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820046
 

4W-7007: CYLINDER HEAD GP

4W-7007 CYLINDER HEAD GP
S/N 73W18062-UP
PART OF 123-0204 ENGINE AR
i00566856 KEBP0082
4W7007 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8071 [1] BRACKET-FUEL PUMP  
2. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1608 [1] BOLT (3/8-16X3.75-IN)  
5. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
6. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
7. 6N-6733 [1] SUPPORT-HOUSING  
8. 225-3099 [2] GASKET-CYLINDER HEAD  
9. 7W-8301 [40] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
11. 141-3228 YC [2] CYLINDER HEAD GP  
12. 0L-1352 [14] BOLT (3/8-16X3.25-IN)  
13. 0L-1352 B [5] BOLT (3/8-16X3.25-IN)  
14. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
15. 4N-0932 [2] PLUG-CUP  
16. 5P-0063 B [4] PLUG-CUP  
17. 4N-7253 [12] GASKET-CHAMBER  
18. 359-1439 [48] SEAL AS-WATER  
19. 106-1792 [24] STUD-TAPERLOCK (3/8-16X4-IN)  
20. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
21. 8T-6762 [5] PLUG-PIPE (1/2-14-THD)  
22. 8T-6762 B [1] PLUG-PIPE (1/2-14-THD)  
23. 8T-6764 B [1] PLUG-PIPE (1/8-27-THD)  
24. 6N-6734 [1] SUPPORT-HOUSING  
25. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
26. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
27. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
29. 8S-9191 [2] BOLT (3/8-16X4-IN)  
30. 1W-5207 [1] BRACKET-FUEL PUMP  
31. 7L-4774 [12] SEAL-O-RING  
32. 100-6920 [12] ADAPTER-NOZZLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820047
 

7W-2242: CYLINDER HEAD GP

7W-2242 CYLINDER HEAD GP
S/N 73W1-18061
PART OF 4W-7007 CYLINDER HEAD GP
i00108866 KEBP0082
7W2242 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2243 YC [1] CYLINDER HEAD AS  
2. 115-2368 [12] VALVE-INLET  
3. 2A-4429 [48] LOCK-RETAINER  
4. 6N-7175 [24] ROTOCOIL AS  
    (EACH INCLUDES)
4A. 6N-7174 [1] SHIELD-OIL  
5. 4N-5906 [24] SPRING-VALVE  
6. 115-2367 [12] VALVE-EXHAUST  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820048
 

9N-3600: CYLINDER HEAD GP

9N-3600 CYLINDER HEAD GP
S/N 79V25019-UP
PART OF 130-4005 ENGINE AR
i00437087 KEBP0082
9N3600 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2282 Y [2] CYLINDER HEAD GP  
2. 9L-7657 [2] PLUG-CUP  
3. 6F-5282 [8] BOLT (1/2-13X5.25-IN)  
4. 7W-2059 C [2] GASKET-CYLINDER HEAD  
5. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
6. 5B-9603 [6] BOLT (3/8-16X5-IN)(LOCATION D)  
7. 0L-1329 [8] BOLT (1/2-13X3-IN)(LOCATION E)  
8. 2B-2006 [12] BOLT (1/2-13X4.75-IN)  
9. 2B-0947 [8] BOLT (1/2-13X2.25-IN)  
10. 8T-6765 [2] PLUG-PIPE (1/4-18-THD)  
11. 3H-7654 [36] WASHER-HARD (13.5X22.5X3-MM THK)  
12. 4L-2768 [1] PLUG-PIPE  
13. 8T-6765 B [1] PLUG-PIPE (1/4-18-THD)  
14. 2B-0858 [2] PLUG-PIPE  
15. 9L-9166 [1] STUD (3/8-16X3.63-IN)  
16. 8T-6765 [1] PLUG-PIPE (1/4-18-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820049
 

101-6023: DAMPER GP

101-6023 DAMPER GP
S/N 73W1-UP
PART OF 123-0204 ENGINE AR
i00463758 KEBP0082
1016023 DAMPER GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7787 [1] ADAPTER-DAMPER  
2. 5P-9266 [12] BOLT-12 POINT HEAD (5/8-18X5.25-IN)  
3. 167-8132 [1] DAMPER AS  
4. 1F-7958 [12] NUT-FULL (1/2-13-THD)  
5. 2D-8153 [12] STUD-TAPERLOCK (1/2-13X1.77-IN)  
6. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Engine News
New 6V116 Water Sleeve Removal Tool Is Available
1979/05/23
New Rocker Arm Assemblies Used
1982/09/22
Resurfaced Cylinder Blocks And Heads
1982/11/10
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Improved Cylinder Head Gasket
1983/02/16
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power
1983/10/26
Correct Installation Of New Valve Springs
1983/11/30
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads
1984/01/18
Improved Cylinder Head Gasket
1984/06/20
New Relief Valve Guide Used In Oil Pump
1984/07/11
Identification Of Camshaft Groups And Valve Mechanism Groups
1984/12/12
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure
1985/04/01
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines
1985/08/01
Head Gasket Replacement Procedure
1985/08/01
Improved Cylinder Head Gasket
1986/03/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Plastic Water Sleeve Used
1987/06/01
Check Plastic Water Sleeve If Engine Experiences Severe Overheating
1987/11/01
New Head Gasket Used
1989/05/01
New Camshaft And Lifter Kits Available For Slipper Type Cam Followers (Valve Lifters)
1989/12/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Clarify Usage Of Parts Service Cylinder Head Gaskets
1993/12/01
New Lifter Assembly Is Available For Turbocharged Engines {1209}
1996/09/23
New Chrome-Plated Stem On Exhaust Valve Increases Valve And Valve Guide Wear Life {1105,1100}
1997/06/23
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Special Instruction
Installation of Head Gasket (With New Torque Procedure){1100}
Installation of Head Gasket (With New Torque Procedure){1100}
Adaptability of 7C1599 Cylinder Head Gasket{1100}
Adaptability of 7C1599 Cylinder Head Gasket{1100}
Installation Of Remanufactured Cylinder Head Groups{1101}
Installation Of Remanufactured Cylinder Head Groups{1101}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Using The 6V-7770 Valve Guide Kit And 6V-7755 Spring Seat Guide{670, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation Of Replacement Cylinder Head Groups (Non-Turbocharged){1101}
Installation Of Replacement Cylinder Head Groups (Non-Turbocharged){1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Installation Of Replacement Cylinder Head Assemblies{1101}
Installation Of Replacement Cylinder Head Assemblies{1101}
Installation Of Replacement Cylinder Head Groups (Turbocharged){1101}
Installation Of Replacement Cylinder Head Groups (Turbocharged){1101}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Valve Seats And Inserts
3208 INDUSTRIAL ENGINE
Cylinder Head
3208 INDUSTRIAL ENGINE
Valve Seats And Inserts
3208 INDUSTRIAL ENGINE
Cylinder Head
3208 INDUSTRIAL ENGINE
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Cylinder Heads
3208 INDUSTRIAL ENGINE
Valve Covers
3208 INDUSTRIAL ENGINE
Cylinder Head Assemblies
3208 INDUSTRIAL ENGINE
Service Magazine
Larger Valve Springs{1108,1101,1252}
1981/05/04
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Resurfaced Cylinder BlocksAnd Heads{1201,1101,1000}
1982/10/25
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Improved Cylinder Head Gasket{1101,1201}
1983/01/24
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Valve Spring Retainers Now Have Thicker Flanges{1108}
1983/04/25
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/17
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Replacement Valve Guides Can Be Used To Recondition Cylinder Heads{1104}
1983/12/19
Improved Cylinder Head Gasket{1101,1201}
1984/05/21
New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets {1100,1101}
1984/06/25
FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01
Head Gasket Replacement Procedure{0350,1100}
1985/08/05
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines{1100,1108}
1985/08/05
Improved Cylinder Head Gasket{1101,1201}
1986/03/24
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
New Plastic Water Sleeve Used{1380}
1987/05/18
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Engine Valve Springs Are Now Made Of Carbon Steel Alloy{1101,1108}
1979/02/19
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Head Gasket Used {1124}
1989/05/15
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Compression Ratio Increased On Remanufactured OR1094 & OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
Clarify Usage Of Parts Service Cylinder Head Gaskets{1124}
1994/01/10
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New Water Seal Assembly Is Now Used on All 3408 and 3412 Engines {1100, 7555}
2013/08/06

Caterpillar Parts SIS Catalog PR-1000 :

CYLINDER HEAD AS
143-0047 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0046 CYLINDER HEAD AS
CYLINDER BLOCK GP
9N-6356 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-4850 CYLINDER BLOCK GP
CYLINDER BLOCK GP
4N-1201 CYLINDER BLOCK GP
CYLINDER BLOCK AS
7E-0036 CYLINDER BLOCK AS
CYLINDER BLOCK AS
126-1375 CYLINDER BLOCK AS
CYLINDER BLOCK AS
126-1372 CYLINDER BLOCK AS
CYLINDER HEAD AS
7C-3807 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2243 CYLINDER HEAD AS
CYLINDER HEAD GP
141-3228 CYLINDER HEAD GP
CYLINDER HEAD GP
1W-2282 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7007 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2242 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-3600 CYLINDER HEAD GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.