118-7656 DAMPER GP S/N 79V25019-UP PART OF 130-4005 ENGINE AR PR-1000 COLD PLANER

BASIC ENGINE

DAMPER GP

0. 118-7656 DAMPER GP

DRIVE GP-ACCESSORY

1. 4N-7351 DRIVE GP-A

DRIVE GP-FAN

2. 082-0872 DRIVE GP-F

ENGINE GP

3. 7R-3056 ENGINE GP
4. 7R-3056 ENGINE GP

FLYWHEEL GP

5. 4N-8850 FLYWHEEL G
6. 7N-3079 FLYWHEEL G

GEAR GP

7. 4N-6341 GEAR GP-FR
8. 4N-3825 GEAR GP-RE

AIR COMPRESSOR GP

9. 4N-9680 GOVERNOR G
0. INFORMATION

COLD PLANER PR-1000 COLD PLANER 5XC
PR-1000C Cold Planer 5XC00138-UP (MACHINE) POWERED BY 3208 Engine KEBP0082 PR-1000 5XC (1985)

BASIC ENGINE

DAMPER GP

101-6023 DAMPER GP

118-7656 DAMPER GP

#KEBP00820050

118-7656: DAMPER GP

DAMPER GP

118-7656 DAMPER GP
S/N 79V25019-UP
PART OF 130-4005 ENGINE AR

i00487194 KEBP0082

For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	118-6671	[1]	POINTER-TIMING
2.	121-3115	[1]	DAMPER AS-CRANKSHAFT
3.	9N-0288	[1]	WASHER
4.	9S-1368	[1]	BOLT (1-14X3.5-IN)

#KEBP00820051

4N-7351: DRIVE GP-ACCESSORY

DRIVE GP-ACCESSORY

4N-7351 DRIVE GP-ACCESSORY
S/N 5XC138-UP
AIR COMPRESSOR
PART OF 7R-4319 SUPPLY GP-AIR

i00370919 KEBP0082

For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-6792	[1]	PULLEY AS-IDLER
2.	9S-8752	[2]	NUT-FULL (3/8-16-THD)
3.	5M-2894 C	[7]	WASHER-HARD (10.2X18.5X2.5-MM THK)
4.	2P-7333	[1]	V-BELT
5.	8S-9191 C	[1]	BOLT (3/8-16X4-IN)
6.	1P-3890 C	[1]	SPACER
7.	5B-9079	[2]	NUT-JAM (3/8-24-THD)
8.	9L-7284	[1]	CLIP-ADJUSTING
9.	0S-1617	[1]	BOLT (5/16-18X0.75-IN)
	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
10.	4N-6871	[1]	ROD-ADJUSTMENT
11.	3H-5368	[1]	BOLT (7/16-14X1.375-IN)
	4S-9191	[1]	WASHER (12X22.5X5-MM THK)
			(USED WITHOUT TURBO ENGINE MOUNTED AIR CLEANER)
12.	9N-2173 C	[1]	BRACKET
13.	0T-0065	[1]	BOLT (3/8-16X3.5-IN)
	C		CHANGE FROM PREVIOUS TYPE

#KEBP00820052

082-0872: DRIVE GP-FAN

DRIVE GP-FAN

082-0872 DRIVE GP-FAN
S/N 5XC138-UP
PART OF 7X-8302 POWER PACK GP

i00456841 KEBP0082

For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	081-7499	[1]	BLADE
2.	5P-2424	[6]	BOLT (1/2-13X2.25-IN)
3.	8T-4223	[14]	WASHER-HARD (13.5X25.5X3-MM THK)
4.	082-0873	[1]	GUARD
5.	082-0874	[1]	GUARD
6.	4L-6454	[15]	BOLT (3/8-16X1-IN)
7.	8T-4896	[38]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	6V-8801	[11]	NUT (3/8-16-THD)
9.	6V-8188	[4]	NUT (1/2-13-THD)
10.	082-0875	[1]	GUARD
11.	7X-0408	[4]	BOLT (1-8X3.5-IN)
12.	8T-5361	[8]	WASHER-HARD (28X49X5-MM THK)
13.	6V-8190	[4]	NUT (1-8-THD)
14.	082-0899	[1]	BRACKET
15.	8T-8924	[2]	BOLT (3/4-10X2.5-IN)
16.	8T-4994	[11]	WASHER-HARD (20X36.5X3.5-MM THK)
17.	8C-1470 Y	[1]	SHAFT GP-FAN DRIVE
18.	8C-2913	[1]	PLATE
19.	8C-7491 Y	[1]	FAN GP
20.	8T-8048	[1]	V-BELT SET
21.	081-7480	[1]	SHAFT
22.	081-7522	[1]	KEY
23.	8C-7016	[2]	BEARING
24.	7X-0370	[4]	BOLT (3/4-10X3.5-IN)
25.	081-6800	[4]	WASHER
26.	6V-8182	[5]	NUT (3/4-10-THD)
27.	082-0891	[1]	GUARD
28.	081-9260	[1]	HUB
29.	8T-6871	[3]	BOLT (5/8-11X2.5-IN)
30.	8T-4122	[3]	WASHER-HARD (17X32X3.5-MM THK)
31.	081-9029	[1]	SHEAVE
32.	7X-3694	[1]	BOLT
33.	081-7923	[1]	NUT-JAM
34.	8T-4835	[4]	BOLT (1/2-13X2-IN)
35.	9B-7237	[16]	BOLT (3/8-16X1.25-IN)
36.	7X-0449	[2]	NUT-FULL (7/8-9-THD)
	Y		SEPARATE ILLUSTRATION

#KEBP00820053

7R-3056: ENGINE GP

ENGINE GP

7R-3056 ENGINE GP
S/N 5XC138-150
PART OF 7X-8302 POWER PACK GP

i00416336 KEBP0082

For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	082-0871	[1]	FRAME
2.	5P-2566	[2]	BOLT (1/2-13X1.5-IN)
3.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
4.	6V-8188	[2]	NUT (1/2-13-THD)
5.	7X-0365	[2]	BOLT (3/4-10X1.5-IN)
6.	8T-4994	[2]	WASHER-HARD (20X36.5X3.5-MM THK)
7.	4N-3986 Y	[1]	ALTERNATOR GP-CHARGING (24-VOLT, 60-AMPERE)
8.	4L-6459	[3]	BOLT (3/8-16X2.5-IN)
9.	8T-4896	[31]	WASHER-HARD (10.2X18.5X2.5-MM THK)
10.	6V-8801	[3]	NUT (3/8-16-THD)
11.	082-0866	[1]	BRACKET
12.	8C-6877	[3]	BOLT (7/16-14X1.75-IN)
13.	8T-5360	[15]	WASHER (12X22.5X2.5-MM THK)
14.	8C-2086	[1]	V-BELT
15.	3T-2652 Y	[1]	STARTING MOTOR GP-ELECTRIC
16.	082-0893	[1]	BRACKET
17.	9B-7237	[14]	BOLT (3/8-16X1.25-IN)
18.	8C-1875	[1]	CABLE
19.	9S-1303	[1]	PIN
20.	8S-7048	[1]	ROD END
21.	8J-1256	[2]	CLIP
22.	2N-3479	[4]	SCREW (10-24X0.5-IN)
23.	033-9497	[2]	CLAMP
24.	031-0249	[4]	LOCKNUT (10-24-THD)
25.	5M-3062	[8]	BOLT (3/8-16X0.75-IN)
26.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
27.	6V-8187	[1]	NUT (1/4-28-THD)
28.	081-7690 Y	[1]	DRIVE GP-PUMP
29.	4L-6454	[3]	BOLT (3/8-16X1-IN)
30.	7J-8611	[1]	ELBOW-PIPE
31.	5M-6213	[1]	PLUG-PIPE (1/4-18-THD)
32.	030-7948	[1]	ELBOW
33.	3K-0360	[1]	SEAL-O-RING
34.	9N-9876 I	[1]	HOSE AS
35.	2P-1325	[1]	ELBOW-UNION
36.	7F-2050	[1]	LOCKNUT (3/4-16-THD)
37.	8S-4951	[1]	CAP (FLARED)
38.	8B-3768	[1]	ROD END
39.	3B-4607	[1]	PIN-COTTER
40.	2D-7325	[1]	TEE-PIPE
41.	4S-6399	[1]	CONNECTOR
42.	7X-3387	[1]	VALVE AS-FLUID SAMPLING
43.	8C-3445	[1]	CAP-DUST
44.	086-8984	[1]	GUARD AS
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#KEBP00820054

7R-3056: ENGINE GP

ENGINE GP

7R-3056 ENGINE GP
S/N 5XC151-UP
PART OF 7X-8302 POWER PACK GP

i00416341 KEBP0082

For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	082-0871	[1]	FRAME
2.	5P-2566	[2]	BOLT (1/2-13X1.5-IN)
3.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
4.	6V-8188	[3]	NUT (1/2-13-THD)
5.	7X-0366 C	[2]	BOLT (3/4-10X2-IN)
6.	8T-4994	[2]	WASHER-HARD (20X36.5X3.5-MM THK)
7.	4N-3986 Y	[1]	ALTERNATOR GP-CHARGING (24-VOLT, 60-AMPERE)
8.	4L-6459	[3]	BOLT (3/8-16X2.5-IN)
9.	8T-4896	[25]	WASHER-HARD (10.2X18.5X2.5-MM THK)
10.	6V-8801	[3]	NUT (3/8-16-THD)
11.	082-0866	[1]	BRACKET
12.	8T-9382 C	[3]	BOLT (7/16-14X1.25-IN)
13.	8T-5360 C	[3]	WASHER (12X22.5X2.5-MM THK)
14.	8C-2086	[1]	V-BELT
15.	4N-3181 CY	[1]	STARTING MOTOR GP-ELECTRIC
16.	1G-7659 C	[1]	BRACKET AS
17.	9B-7237 C	[12]	BOLT (3/8-16X1.25-IN)
18.	8C-1875 BD	[1]	CABLE
19.	9S-1303	[1]	PIN
20.	8S-7048	[1]	ROD END
21.	8J-1256 C	[1]	CLIP
22.	2S-9556	[4]	SCREW-MACHINE (10-32X0.875-IN)
23.	033-9497	[2]	CLAMP
24.	4L-1250	[4]	LOCKNUT (10-32-THD)
25.	5M-3062	[8]	BOLT (3/8-16X0.75-IN)
26.	8T-4205 C	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
27.	6V-8187	[1]	NUT (1/4-28-THD)
28.	081-7690 Y	[1]	DRIVE GP-PUMP
29.	4L-6454 C	[5]	BOLT (3/8-16X1-IN)
30.	7J-8611	[1]	ELBOW-PIPE
31.	5M-6213	[1]	PLUG-PIPE (1/4-18-THD)
32.	030-7948	[1]	ELBOW
33.	3K-0360	[1]	SEAL-O-RING
34.	9N-9876 I	[1]	HOSE AS
35.	2P-1325	[1]	ELBOW-UNION
36.	7F-2050	[1]	LOCKNUT (3/4-16-THD)
37.	8S-4951	[1]	CAP (FLARED)
38.	8B-3768	[1]	ROD END
39.	3B-4607	[1]	PIN-COTTER
40.	2D-7325	[1]	TEE-PIPE
41.	4S-6399	[1]	CONNECTOR
42.	7X-3387	[1]	VALVE AS-FLUID SAMPLING
43.	8C-3445	[1]	CAP-DUST
44.	086-8984	[1]	GUARD AS
45.	1H-3337 C	[1]	BOLT (1/4-20X0.875-IN)
46.	4D-3704 C	[3]	WASHER-HARD (17X30X5-MM THK)
47.	7R-7965 C	[1]	NUT
48.	8S-2332 C	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
49.	4N-8225	[1]	PULLEY-ALTERNATOR (1-GROOVE)
50.	7X-0341	[1]	BOLT (1/2-13X7-IN)
51.	2R-1494	[1]	SPACER (0.562X1X1.31-IN THK)
52.	6N-2723	[1]	SUPPORT-ALTERNATOR
53.	1S-4589	[1]	ROD
54.	8S-5383	[1]	BLOCK
55.	8T-4122	[3]	WASHER-HARD (17X32X3.5-MM THK)
56.	7X-0448	[3]	NUT (5/8-11-THD)
57.	8C-6362	[1]	BOLT (5/8-11X2.75-IN)
58.	8T-8919	[1]	BOLT (1/2-13X1.75-IN)
59.	5P-1075	[6]	WASHER-HARD (10.2X22.5X3-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#KEBP00820055

4N-8850: FLYWHEEL GP

FLYWHEEL GP

4N-8850 FLYWHEEL GP
S/N 79V25019-UP
PART OF 130-4005 ENGINE AR
FOR USE WITH SAE NO. 2 FLYWHEEL HOUSING, 10 OR 11.5 INCH OVER CENTER CLUTCH

i00371082 KEBP0082

For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9L-7816 B	[10]	BOLT (7/16-20X1.72-IN)
2.	4N-8544	[1]	FLYWHEEL AS
3.	9L-8113	[1]	GEAR-FLYWHEEL RING (134-TEETH)
	B		USE AS REQUIRED

#KEBP00820056

7N-3079: FLYWHEEL GP

FLYWHEEL GP

7N-3079 FLYWHEEL GP
S/N 73W1-UP
PART OF 123-0204 ENGINE AR
FOR USE WITH SAE NO. 0 FLYWHEEL HOUSING

i00409005 KEBP0082

For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-1250	[1]	FLYWHEEL AS
2.	8M-6755	[1]	GEAR-FLYWHEEL (136-TEETH)
3.	0S-1602	[12]	BOLT (5/8-18X3.5-IN)
4.	4D-3704	[12]	WASHER-HARD (17X30X5-MM THK)

#KEBP00820057

4N-6341: GEAR GP-FRONT

GEAR GP-FRONT

4N-6341 GEAR GP-FRONT -TIMING
S/N 73W1-UP
PART OF 123-0204 ENGINE AR

i00108679 KEBP0082

For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2B-2695	[4]	BOLT (5/16-18X0.875-IN)
2.	112-9217	[1]	PLATE-THRUST
3.	2W-4087 C	[1]	GEAR AS-IDLER (35-TEETH)
	6N-0977	[1]	BUSHING
4.	2W-3875 C	[1]	GEAR-OIL PUMP DRIVE (56-TEETH)
5.	1P-7346	[1]	WASHER-HARD (10.2X35X6-MM THK)
6.	0S-1571	[1]	BOLT (3/8-16X1.75-IN)
7.	1B-8705	[1]	KEY-WOODRUFF
8.	7S-5005	[2]	DOWEL
9.	6N-1025	[1]	SHAFT-PUMP IDLER
	4H-1641	[1]	PIN-SPRING
10.	3B-1915	[2]	BOLT (3/8-16X1.375-IN)
11.	6N-1027	[1]	PLATE-THRUST
12.	0T-0573	[1]	BOLT (3/8-16X2.75-IN)
13.	271-5656	[1]	GEAR AS-IDLER (99/43-TEETH)
	1B-8705	[1]	KEY-WOODRUFF
	131-7123	[1]	BUSHING
14.	117-9712	[1]	SHAFT-DRIVE IDLER
15.	3G-2292	[5]	BOLT-LOCKING (3/8-16X0.87-IN)
16.	7N-2443	[1]	WASHER-THRUST (2.508X3.5X0.188-IN THK)
17.	5M-2894	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE

#KEBP00820058

4N-3825: GEAR GP-REAR

GEAR GP-REAR

4N-3825 GEAR GP-REAR
S/N 73W1-UP
PART OF 123-0204 ENGINE AR

i00093408 KEBP0082

For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4W-9985	[1]	GEAR-CAMSHAFT (86-TEETH)
2.	1B-9575	[4]	BOLT (5/16-18X1.56-IN)
	9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)

#KEBP00820059

4N-9680: GOVERNOR GP-AIR COMPRESSOR

GOVERNOR GP-AIR COMPRESSOR

4N-9680 GOVERNOR GP-AIR COMPRESSOR
S/N 5XC138-UP
PART OF 7R-4319 SUPPLY GP-AIR

i02145533 KEBP0082

4N9680 GOVERNOR GP-AIR COMPRESSOR Parts scheme

For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2S-2923	[1]	COVER AS (GOVERNOR)
	2K-8198	[1]	SEAL-O-RING

			AVAILABLE REPAIR KIT(S):
	9M-0402	[1]	KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)
			(INCLUDES GROMMETS, FILTERS, SPRING, VALVES, COVER, RING & GASKET)