AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1W-4436 LINES GP-FUEL FILTER S/N 79V25019-UP PART OF 130-4005 ENGINE AR PR-1000 COLD PLANER


FUEL SYSTEM
LINES GP-FUEL
LINES GP-FUEL INJECTION

COLD PLANER PR-1000 COLD PLANER 5XC
 PR-1000C Cold Planer 5XC00138-UP (MACHINE) POWERED BY 3208 Engine KEBP0082 PR-1000 5XC   (1985)

FUEL SYSTEM

LINES GP-FUEL
LINES GP-FUEL
6R-0653 LINES GP-FUEL
LINES GP-FUEL FILTER
1W-4436 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
7W-1077 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
7W-1077 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
7W-1077 LINES GP-FUEL FILTER
 

#KEBP00820170
 

1W-4436: LINES GP-FUEL FILTER

1W-4436 LINES GP-FUEL FILTER
S/N 79V25019-UP
PART OF 130-4005 ENGINE AR
i00356791 KEBP0082
1W4436 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-1707 [1] BRACKET AS  
2. 030-6816 [2] ELBOW  
3. 1J-9671 [2] SEAL-O-RING  
4. 033-3083 C [1] BRACKET  
5. 1W-4435 [1] TUBE AS  
6. 4H-8878 [1] CLIP  
7. 1A-5350 [1] CLIP  
8. 9N-0856 [1] TUBE AS-OUTLET  
9. 9N-2061 C [1] CLIP  
10. 2A-0762 C [1] BOLT (1/4-20X0.625-IN)  
11. 9S-8750 C [1] NUT-FULL (1/4-20-THD)  
12. 5P-0537 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00820171
 

7W-1077: LINES GP-FUEL FILTER

7W-1077 LINES GP-FUEL FILTER
S/N 73W1-UP
PART OF 123-0204 ENGINE AR
Type 1
i00431505 KEBP0082
7W1077 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-7214 [2] ELBOW  
2. 6V-5049 [8] SEAL-O-RING  
3. 7J-4026 [1] ELBOW  
4. 6N-4379 I [1] HOSE AS  
5. 6N-4376 I [1] HOSE AS  
6. 6K-9194 [1] ELBOW  
7. 030-7947 [3] ELBOW  
8. 030-7942 [1] ELBOW  
9. 0L-1351 [3] BOLT (3/8-16X0.875-IN)  
10. 5M-2894 [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 8M-2773 [1] CLIP (LOOP)  
12. 7D-7233 [3] CLIP  
13. 9X-7378 [3] SEAL-O-RING  
14. 4W-1968 [1] DAMPER-SURGE  
15. 6V-8349 [1] TEE-O-RING PORT  
16. 6K-0806 [5] STRAP-CABLE  
17. 0S-1619 J [1] BOLT (3/8-16X3-IN)  
18. 0S-1590 P [1] BOLT (3/8-16X2-IN)  
  1B-4971 F [1] SPACER (0.406X1X1-IN THK)  
19. 2F-4967 [2] SPACER (10.5X19X5.512-MM THK)  
20. 0L-2070 L [1] BOLT (3/8-16X2.25-IN)  
21. 6N-4378 I [1] HOSE AS  
22. 6N-4377 I [1] HOSE AS  
23. 9S-4191 [1] PLUG (9/16-18-THD)  
24. 9S-4182 [1] PLUG (7/16-20-THD)  
25. 4D-7733 [1] CLIP  
26. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
  9S-8752 F [2] NUT-FULL (3/8-16-THD)  
27. 1A-2029 N [1] BOLT (3/8-16X1.125-IN)  
28. 0T-0065 [1] BOLT (3/8-16X3.5-IN)  
29. 8N-3962 [1] BRACKET AS-FUEL FILTER  
30. 4B-4043 [4] BOLT (5/8-11X1.375-IN)  
  5P-8247 F [4] WASHER-HARD (17X32X3.5-MM THK)  
31. 6N-3797 [1] JUNCTION BLOCK  
32. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
33. 0S-1608 P [1] BOLT (3/8-16X3.75-IN)  
  6H-7127 FP [1] SPACER (13/32X5/8X9/16-IN THK)  
34. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
35. 0S-1591 L [1] BOLT (3/8-16X1.5-IN)  
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   FOR USE WITH AFTERCOOLED ENGINES
  L   FOR USE WITH DRY MANIFOLDS
  N   FOR USE WITH NON-AFTERCOOLED ENGINES
  P   FOR USE WITH WATER-COOLED MANIFOLDS
 

#KEBP00820172
 

7W-1077: LINES GP-FUEL FILTER

7W-1077 LINES GP-FUEL FILTER
S/N 73W1-UP
PART OF 123-0204 ENGINE AR
Type 2
i02707054 KEBP0082
7W1077 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-7214 [2] ELBOW  
2. 6V-5049 [8] SEAL-O-RING  
3. 7J-4026 [1] ELBOW  
4. 6N-4379 I [1] HOSE AS  
5. 6N-4376 I [1] HOSE AS  
6. 6K-9194 [1] ELBOW  
7. 030-7947 [3] ELBOW  
8. 030-7942 [1] ELBOW  
9. 0L-1351 [3] BOLT (3/8-16X0.875-IN)  
10. 5M-2894 [13] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 8M-2773 [1] CLIP (LOOP)  
12. 7D-7233 [3] CLIP  
13. 9X-7378 [3] SEAL-O-RING  
14. 4W-1968 [1] DAMPER-SURGE  
15. 6V-8349 [1] TEE-O-RING PORT  
16. 6K-0806 [5] STRAP-CABLE  
17. 0S-1619 J [1] BOLT (3/8-16X3-IN)  
18. 0S-1590 P [1] BOLT (3/8-16X2-IN)  
19. 2F-4967 [2] SPACER (10.5X19X5.512-MM THK)  
20. 0L-2070 L [1] BOLT (3/8-16X2.25-IN)  
21. 103-7481 CI [1] HOSE AS  
22. 6N-4377 I [1] HOSE AS  
23. 9S-4191 [1] PLUG (9/16-18-THD)  
24. 9S-4182 [1] PLUG (7/16-20-THD)  
25. 4D-7733 [1] CLIP  
26. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
27. 1A-2029 N [1] BOLT (3/8-16X1.125-IN)  
28. 0T-0065 [1] BOLT (3/8-16X3.5-IN)  
29. 8N-3962 [1] BRACKET AS-FUEL FILTER  
30. 4B-4043 [4] BOLT (5/8-11X1.375-IN)  
31. 6N-3797 [1] JUNCTION BLOCK  
32. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
33. 0S-1608 P [1] BOLT (3/8-16X3.75-IN)  
34. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
35. 0S-1591 L [1] BOLT (3/8-16X1.5-IN)  
36. 1B-4971 [1] SPACER (0.406X1X1-IN THK)  
37. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
38. 5P-8247 [4] WASHER-HARD (17X32X3.5-MM THK)  
39. 6H-7127 P [1] SPACER (13/32X5/8X9/16-IN THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   FOR USE WITH AFTERCOOLED ENGINES
  L   FOR USE WITH DRY MANIFOLDS
  N   FOR USE WITH NON-AFTERCOOLED ENGINES
  P   FOR USE WITH WATER-COOLED MANIFOLDS
 

#KEBP00820173
 

7W-1077: LINES GP-FUEL FILTER

7W-1077 LINES GP-FUEL FILTER
S/N 73W1-UP
PART OF 123-0204 ENGINE AR
Type 3
i05762338 KEBP0082
7W1077 LINES GP-FUEL FILTER Parts scheme 7W1077 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-1968 [1] DAMPER-SURGE  
2. 6H-7127 P [1] SPACER (13/32X5/8X9/16-IN THK)  
3. 6K-0806 [4] STRAP-CABLE  
4. 6N-3797 [1] JUNCTION BLOCK  
5. 6N-4376 I [1] HOSE AS  
6. 6N-4377 I [1] HOSE AS  
7. 6N-4379 I [1] HOSE AS  
8. 8N-3962 [1] BRACKET AS-FUEL FILTER  
  6N-3278 [1] BRACKET  
9. 8P-5115 [1] BRACKET  
10. 103-7481 I [1] HOSE AS  
11. 191-7805 C [3] ELBOW AS  
    (EACH INCLUDES)
  030-7947 [1] ELBOW  
  214-7568 [1] SEAL-O-RING  
12. 349-8383 C [1] ADAPTER AS  
  7J-4026 [1] ELBOW  
  214-7568 [1] SEAL-O-RING  
13. 0L-1143 CN [1] BOLT (3/8-16X2.5-IN)  
14. 0L-1351 C [4] BOLT (3/8-16X0.875-IN)  
15. 0L-1352 CL [1] BOLT (3/8-16X3.25-IN)  
16. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
17. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
18. 0S-1608 P [1] BOLT (3/8-16X3.75-IN)  
19. 0S-1619 CP [1] BOLT (3/8-16X3-IN)  
20. 0T-0065 [1] BOLT (3/8-16X3.5-IN)  
21. 1A-5964 CJ [1] BOLT (3/8-16X4.5-IN)  
22. 214-7566 [2] SEAL-O-RING  
23. 244-3712 C [1] PLUG AS  
  9S-4191 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
24. 2F-4967 [2] SPACER (10.5X19X5.512-MM THK)  
25. 309-5130 C [1] PLUG AS  
  9S-4182 [1] PLUG (7/16-20-THD)  
  214-7566 [1] SEAL-O-RING  
26. 353-5103 C [1] ADAPTER AS  
  030-7942 [1] ELBOW  
  214-7568 [1] SEAL-O-RING  
27. 353-5108 C [2] ELBOW AS  
    (EACH INCLUDES)
  2P-7214 [1] ELBOW  
  214-7568 [1] SEAL-O-RING  
28. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
29. 4B-4043 [4] BOLT (5/8-11X1.375-IN)  
30. 4D-7733 [1] CLIP  
31. 5M-2894 C [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
32. 5P-8247 [4] WASHER-HARD (17X32X3.5-MM THK)  
33. 6K-9194 [1] ELBOW  
34. 6V-8349 [1] TEE-O-RING PORT  
35. 6W-6672 [2] SPACER (10.5X20X38-MM THK)  
36. 7D-7233 [3] CLIP (LOOP)  
37. 8M-2773 C [2] CLIP (LOOP)(LOOP)  
38. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
39. 9X-6458 [3] WASHER-HARD (10.2X22.5X3-MM THK)  
40. 6K-0806 J [1] STRAP-CABLE  
41. 0S-1591 L [1] BOLT (3/8-16X1.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   FOR USE WITH AFTERCOOLED ENGINES
  L   FOR USE WITH DRY MANIFOLDS
  N   FOR USE WITH NON-AFTERCOOLED ENGINES
  P   FOR USE WITH WATER-COOLED MANIFOLDS
 

#KEBP00820174
 

121-4694: LINES GP-FUEL INJECTION

121-4694 LINES GP-FUEL INJECTION
S/N 79V25019-UP
PART OF 130-4005 ENGINE AR
i00483397 KEBP0082
1214694 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-0298 Y [1] LINES GP-FUEL INJECTION  
2. 9N-2050 [1] BRACKET  
3. 9L-8716 [1] CLAMP  
4. 5P-4939 [1] SCREW-MACHINE (10-24X15.88-IN)  
5. 125-9623 [1] TUBE AS  
6. 8L-8413 [6] STRAP-CABLE (WHITE)  
7. 5P-3395 [1] ELBOW  
8. 5P-6011 D TUBE (SEAL BLEED LINE)  
9. 5P-6011 D TUBE (SEAL BLEED LINE)  
10. 5P-6011 D TUBE (HOUSING DRAIN/MANUAL BLEED)  
11. 9L-9251 [1] CLIP  
12. 9L-7675 [8] ADAPTER AS-LINE  
    (EACH INCLUDES)
13. 6F-4855 [1] SEAL-O-RING  
14. 122-9007 [8] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
15. 1H-1023 [1] SEAL-O-RING  
16. 9L-9098 [1] SEAL-CARBON STOP  
17. 9N-3738 [1] WASHER  
18. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
19. 9Y-0299 Y [1] LINES GP-FUEL INJECTION  
20. 1W-2459 [8] CLAMP AS  
21. 9N-3879 [8] SPACER  
22. 9L-9372 [4] LOCK-ADAPTER  
  D   ORDER BY THE METER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820175
 

2W-8065: LINES GP-FUEL INJECTION

2W-8065 LINES GP-FUEL INJECTION
S/N 73W1-UP
PART OF 123-0204 ENGINE AR
i00360665 KEBP0082
2W8065 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0349 CY [1] LINES GP-FUEL INJECTION  
2. 6I-0350 CY [1] LINES GP-FUEL INJECTION  
3. 1S-0004 [2] SEAL-O-RING  
4. 068-8438 [6] SPACER (11.12X19.05X7.9-MM THK)  
5. 5M-2894 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 0S-1591 C [4] BOLT (3/8-16X1.5-IN)  
7. 5B-1484 [12] NUT (3/4-10-THD)  
8. 9Y-3969 [12] LINE AS-FUEL INJECTION  
    (EACH INCLUDES)
  8L-2779 [1] SEAL-O-RING  
9. 4W-7018 Y [12] INJECTOR GP-FUEL  
10. 7W-2315 [12] RETAINER  
11. 5P-8119 [12] SEAL-O-RING  
12. 6V-4314 C [1] SEAL-O-RING  
13. 9Y-3359 [1] CLAMP AS (NON-THREADED)(80-MM)  
14. 7C-6589 [1] CLAMP-FUEL LINE (THREADED)(48-MM)  
15. 9Y-3357 [1] CLAMP (THREADED)(34-MM)  
16. 9Y-3356 [1] CLAMP (NON-THREADED)(76-MM)  
17. 2A-4639 [2] BOLT (3/8-16X1.625-IN)  
18. 9X-6458 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 104-3039 [6] SCREW AS  
20. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
21. 7C-6591 [2] CLAMP-FUEL LINE (THREADED)  
22. 7C-7747 [2] CLAMP-FUEL LINE (NON-THREADED)  
23. 6I-0347 [1] BRACKET AS  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820176
 

6I-0349: LINES GP-FUEL INJECTION

6I-0349 LINES GP-FUEL INJECTION
S/N 73W1-UP
PART OF 2W-8065 LINES GP-FUEL INJECTION
i00389523 KEBP0082
6I0349 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-7801 [1] LINE AS-FUEL INJECTION (NO. 1)  
2. 4P-7805 [1] LINE AS-FUEL INJECTION (NO. 5)  
3. 4P-7809 [1] LINE AS-FUEL INJECTION (NO. 9)  
4. 4P-7807 [1] LINE AS-FUEL INJECTION (NO. 7)  
5. 4P-7803 [1] LINE AS-FUEL INJECTION (NO. 3)  
6. 4P-7811 [1] LINE AS-FUEL INJECTION (NO. 11)  
7. 5P-4939 [11] SCREW-MACHINE (10-24X15.88-IN)  
8. 1W-9168 [5] CLAMP-FUEL LINE (NON-THREADED)  
9. 1W-9169 [6] CLAMP-FUEL LINE (THREADED)  
10. 4P-3677 [1] CLAMP-FUEL LINE (NON-THREADED)  
11. 4P-3678 [1] CLAMP-FUEL LINE (THREADED)  
12. 7C-6525 [4] CLAMP-FUEL LINE (NON-THREADED)  
13. 7C-6589 [2] CLAMP-FUEL LINE (THREADED)  
14. 7C-7747 [3] CLAMP-FUEL LINE (NON-THREADED)  
15. 7C-6591 [1] CLAMP-FUEL LINE (THREADED)  
16. 101-2732 [1] BRACKET AS  
17. 104-3039 [6] SCREW AS  
18. 124-7102 [1] BRACKET AS  
19. 1W-9167 [5] CLAMP AS-FUEL LINE  
20. 3B-4502 [2] LOCKWASHER  
  4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
  7M-9831 [2] SCREW-MACHINE (10-24X0.88-IN)  
  117-7117 [1] PLATE  
 

#KEBP00820177
 

6I-0350: LINES GP-FUEL INJECTION

6I-0350 LINES GP-FUEL INJECTION
S/N 73W1-UP
PART OF 2W-8065 LINES GP-FUEL INJECTION
i00389531 KEBP0082
6I0350 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-7812 [1] LINE AS-FUEL INJECTION (NO. 12)  
2. 4P-7810 [1] LINE AS-FUEL INJECTION (NO. 10)  
3. 4P-7808 [1] LINE AS-FUEL INJECTION (NO. 8)  
4. 4P-7806 [1] LINE AS-FUEL INJECTION (NO. 6)  
5. 4P-7804 [1] LINE AS-FUEL INJECTION (NO. 4)  
6. 4P-7802 [1] LINE AS-FUEL INJECTION (NO. 2)  
7. 5P-4939 [13] SCREW-MACHINE (10-24X15.88-IN)  
8. 1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
9. 1W-9169 [1] CLAMP-FUEL LINE (THREADED)  
10. 7C-6591 [2] CLAMP-FUEL LINE (THREADED)  
11. 7C-7747 [2] CLAMP-FUEL LINE (NON-THREADED)  
12. 7C-6525 [3] CLAMP-FUEL LINE (NON-THREADED)  
13. 7C-6589 [3] CLAMP-FUEL LINE (THREADED)  
14. 4P-3677 [1] CLAMP-FUEL LINE (NON-THREADED)  
15. 4P-3678 [1] CLAMP-FUEL LINE (THREADED)  
16. 9N-3388 [3] BOLT (10-24X0.75-IN)  
17. 9Y-3380 [1] BRACKET  
18. 7C-6528 [1] BRACKET  
19. 9Y-3357 [2] CLAMP (THREADED)  
20. 102-9228 [2] CLAMP AS (NON-THREADED)  
21. 6H-9954 [2] SCREW AS-MACHINE  
22. 7M-9831 [1] SCREW-MACHINE (10-24X0.88-IN)  
23. 101-2731 [1] PLATE AS  
24. 6I-4811 [2] DAMPER-INJECTION LINE  
25. 6I-4812 [1] CLAMP-INJECTION LINE  
26. 6D-3848 [1] WASHER (5.16X18.64X1.91-MM THK)  
27. 7N-4417 [1] CLAMP-FUEL LINE (NON-THREADED)  
28. 6N-5124 [1] CLAMP-FUEL LINE (THREADED)  
 

#KEBP00820178
 

9Y-0298: LINES GP-FUEL INJECTION

9Y-0298 LINES GP-FUEL INJECTION
S/N 79V25019-UP
PART OF 121-4694 LINES GP-FUEL INJECTION
i00436247 KEBP0082
9Y0298 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-0237 [1] LINE AS-FUEL INJECTION (NO 7)  
2. 9Y-0235 [1] LINE AS-FUEL INJECTION (NO 5)  
3. 9L-8715 [1] CLAMP  
4. 9L-8716 [1] CLAMP  
5. 5P-4939 [3] SCREW-MACHINE (10-24X15.88-IN)  
6. 9L-9160 [1] CLAMP AS-LINE  
7. 9L-8714 [1] CLAMP-FUEL LINE  
 

#KEBP00820179
 

9Y-0299: LINES GP-FUEL INJECTION

9Y-0299 LINES GP-FUEL INJECTION
S/N 79V25019-UP
PART OF 121-4694 LINES GP-FUEL INJECTION
i00436251 KEBP0082
9Y0299 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-0238 [1] LINE AS-FUEL INJECTION (NO 8)  
2. 9L-8715 [2] CLAMP  
3. 9L-8716 [2] CLAMP  
4. 9Y-0236 [1] LINE AS-FUEL INJECTION (NO 6)  
5. 5P-4939 [12] SCREW-MACHINE (10-24X15.88-IN)  
6. 9L-9160 [2] CLAMP AS-LINE  
7. 9L-8714 [5] CLAMP-FUEL LINE  
8. 9Y-0234 [1] LINE AS-FUEL INJECTION (NO 4)  
9. 9Y-0232 [1] LINE AS-FUEL INJECTION (NO 2)  
10. 9Y-0231 [1] LINE AS-FUEL INJECTION (NO 1)  
11. 9Y-0233 [1] LINE AS-FUEL INJECTION (NO 3)  
12. 9L-8713 [3] CLAMP-FUEL LINE  
 

Information:

Engine News
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies
1979/06/20
Use Only Caterpillar Water Separator Elements
1980/10/01
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations
1981/04/01
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Improved Water Separator Group Used
1982/06/16
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure
1982/09/22
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
Tune-Up Kit And Remanufactured Nozzles Available
1984/09/12
Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles
1984/10/24
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Water Separator Available
1987/03/01
Check Valve Added To Keep Air From Entering Fuel System
1988/10/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
An Improved O-Ring Seal And Proper Use Of Adapter Locks Reduces Oil Leaks{1252}
1996/10/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Water Separators Needed On Engines In The Field With SMFS
1977/12/14
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Service Letter-NACD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Service Letter-Australia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Service Letter-CFEL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Service Letter-CSARL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Service Letter-Americas
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Service Letter-Brazil
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Specifications
Injection Nozzle<BR> (9N3979 and 1W5829)
3208 INDUSTRIAL ENGINE
Fuel Injection Nozzles
3208 INDUSTRIAL ENGINE
Fuel Filter Base
3208 INDUSTRIAL ENGINE
Water Separator
3208 INDUSTRIAL ENGINE ATTACHMENTS
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Service Letter-China
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Service Letter-Asia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Information Release Memo
PRODUCT LINE ADDITION: REMAN FUEL INJECTORS AND NOZZLES FOR CERTAIN 3126, 3208, 3406, 3412, 3508, 3512, 3516, C9, C15, C18, C32 ENGINES
PRODUCT LINE ADDITION: REMAN FUEL INJECTORS AND NOZZLES FOR CERTAIN 3126, 3208, 3406, 3412, 3508, 3512, 3516, C9, C15, C18, C32 ENGINES
Service Letter-APD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Product Support Program For Replacing Fuel Nozzles On Certain 3208 Engines
Disassembly and Assembly
Fuel Injection Lines
3208 INDUSTRIAL ENGINE
Fuel Injection Nozzles
3208 INDUSTRIAL ENGINE
Water Separator
3208 INDUSTRIAL ENGINE
Fuel Filter &amp; Fuel Filter Base
3208 INDUSTRIAL ENGINE
Fuel Injection Lines
3208 INDUSTRIAL ENGINE
Fuel Injection Nozzles
3208 INDUSTRIAL ENGINE
Service Magazine
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
Use Only Caterpillar Water Separator Elements{1263}
1980/09/15
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Larger Valve Springs{1108,1101,1252}
1981/05/04
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Improved Water Separator Group Used {1263}
1982/05/31
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure{1254}
1982/08/09
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/17
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles{1254}
1984/10/22
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies{0652,1254}
1979/06/11
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Compression Ratio Increased On Remanufactured OR1094 &amp; OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12

Caterpillar Parts SIS Catalog PR-1000 :

LINES GP-FUEL
6R-0653 LINES GP-FUEL
KIT-FUEL INJECTION LINES CLAMP
6I-4813 KIT-FUEL INJECTION LINES CLAMP
INJECTOR GP-FUEL
4W-7018 INJECTOR GP-FUEL
HOUSING GP-FUEL PUMP
7N-6124 HOUSING GP-FUEL PUMP
GOVERNOR GP
4W-6013 GOVERNOR GP
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
FILTER GP-FUEL
4N-6925 FILTER GP-FUEL
FILTER GP-FUEL
4N-5868 FILTER GP-FUEL
LINES GP-FUEL FILTER
7W-1077 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
7W-1077 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
7W-1077 LINES GP-FUEL FILTER
LINES GP-FUEL INJECTION
121-4694 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
2W-8065 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
6I-0349 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
6I-0350 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-0298 LINES GP-FUEL INJECTION

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.