AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

122-9001 PUMP GP-GOV & FUEL INJ S/N 79V25199-UP PART OF 122-9000 PUMP GP-GOV & FUEL INJ PR-1000 COLD PLANER


FUEL SYSTEM
GOVERNOR GP
SEPARATOR GP-WATER
SUPPLY GP-FUEL
TANK GP-FUEL
TORQUE CONTROL GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP

COLD PLANER PR-1000 COLD PLANER 5XC
 PR-1000C Cold Planer 5XC00138-UP (MACHINE) POWERED BY 3208 Engine KEBP0082 PR-1000 5XC   (1985)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOVERNOR & FUEL PUMP
123-9762 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
6N-3195 DRIVE GP-GOVERNOR & FUEL PUMP
GOVERNOR GP
4W-6013 GOVERNOR GP
PLATE GP-GOVERNOR ADAPTER
4W-7374 PLATE GP-GOVERNOR ADAPTER
PROTECTION GP-FUEL SYSTEM
129-2992 PROTECTION GP-FUEL SYSTEM
PUMP GP-GOV & FUEL INJ
122-9000 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
122-9001 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
122-9002 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV, FUEL INJ & TFR
4W-6069 PUMP GP-GOV, FUEL INJ & TFR
 

#KEBP00820190
 

122-9001: PUMP GP-GOV & FUEL INJ

122-9001 PUMP GP-GOV & FUEL INJ
S/N 79V25199-UP
PART OF 122-9000 PUMP GP-GOV & FUEL INJ
i00512945 KEBP0082
1229001 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-9002 Y [1] PUMP GP-GOV & FUEL INJ  
2. 7L-8070 [2] BOLT  
3. 134-3857 [1] COVER AS-TORQUE SPRING  
4. 4N-0527 [1] SPRING  
5. 117-0287 [1] GASKET-TORQUE SPRING COVER  
6. 4N-5663 [1] SPRING (INNER)  
7. 4N-9226 [1] SPRING (OUTER)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820191
 

122-9002: PUMP GP-GOV & FUEL INJ

122-9002 PUMP GP-GOV & FUEL INJ
S/N 79V25199-UP
PART OF 122-9001 PUMP GP-GOV & FUEL INJ
i00512948 KEBP0082
1229002 PUMP GP-GOV & FUEL INJ Parts scheme 1229002 PUMP GP-GOV & FUEL INJ Parts scheme 1229002 PUMP GP-GOV & FUEL INJ Parts scheme 1229002 PUMP GP-GOV & FUEL INJ Parts scheme 1229002 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8120 [8] BUSHING-TERMINAL  
2. 9N-5827 [8] ROLLER-FUEL PUMP LIFT  
3. 9N-5817 [8] LIFTER-PLUNGER  
4. 6F-6672 [8] SEAL-O-RING  
5. 9Y-0546 [1] FLANGE AS  
6. 7E-5346 [1] VALVE AS  
7. 4N-0975 [1] GASKET-CHECK VALVE  
8. 6N-1716 [1] VALVE AS  
9. 3J-7354 [1] SEAL-O-RING  
10. 2M-5471 [2] BOLT  
11. 122-9005 [1] PUMP AS-FUEL INJECTION  
12. 7W-8039 [1] BONNET-VALVE  
13. 4N-0224 [1] RING-RETAINING  
14. 1W-6987 [1] VALVE AS-CHECK  
15. 7C-9966 [1] INSERT  
16. 8N-1415 [1] SPRING-CHECK  
16A. 142-2815 [1] PUMP AS-FUEL INJECTION  
17. 4N-2728 [1] WASHER-RETAINING  
18. 9N-5862 [1] SPRING-LIFTER  
19. 4N-2773 [1] SHAFT AS-CONTROL  
20. 5S-0003 [2] NUT (5/16-18-THD)  
21. 4N-2708 [1] SETSCREW  
22. 4N-0528 [1] SHAFT-LEVER  
23. 4N-9828 [1] SHAFT AS-CONTROL  
24. 4N-3922 [1] LEVER AS  
25. 2N-2658 [10] BOLT-SOCKET HEAD (8-32X15.88-MM)  
26. 9N-5820 [8] LEVER-CONTROL  
27. 126-4144 [1] LEVER-SHAFT  
28. 124-5941 [1] SHAFT-CONTROL  
29. 7C-6201 [1] LEVER-SEAT  
30. 7C-6202 [1] LEVER  
31. 6F-0612 [1] NUT-JAM (1/4-28-THD)  
32. 6N-4176 [1] SETSCREW  
33. 4N-0445 [1] LEVER-LOAD STOP  
  2M-7819 [1] RING-RETAINING  
34. 4N-0523 [1] DOWEL-STOP SUPPORT  
36. 4N-3329 [2] WASHER (16.25X25.65X0.79-MM)  
37. 6N-7523 [1] WASHER (6.48X11.9X1.57-MM THK)  
38. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
39. 1D-4533 [3] BOLT (1/4-20X2.25-IN)  
40. 2A-4781 [3] BOLT (1/4-20X2.75-IN)  
41. 8N-3946 [1] HOUSING AS-GOVERNOR  
42. 4N-2333 [1] PIN-SPRING  
43. 8S-6814 [2] PIN  
44. 9Y-4966 [1] VALVE AS-RELIEF  
  2D-6392 [1] SEAL-O-RING  
45. 9S-4182 [1] PLUG (7/16-20-THD)  
46. 3J-7354 [1] SEAL-O-RING  
47. 8N-3945 [1] BUSHING-TERMINAL  
48. 2W-4037 [1] SEAL-LIP TYPE  
49. 7X-2395 [1] BOLT-LOCKING  
50. 3H-0442 [1] SEAL-O-RING  
51. 128-7347 [1] LEVER AS-RISER  
52. 0S-1615 [7] BOLT (1/4-20X0.75-IN)  
53. 3J-7354 [1] SEAL-O-RING  
54. 9S-4182 [1] PLUG (7/16-20-THD)  
55. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
56. 9S-9332 [1] FITTING-ELBOW  
57. 124-5939 [1] COVER-FUEL PUMP HOUSING  
58. 6D-3031 [1] SCREW-SOCKET HEAD (8-32X0.375-IN)  
59. 4N-0941 [1] LEVER-LIMITER  
60. 4N-0505 [1] GASKET-HOUSING  
61. 128-2974 [1] HOUSING AS  
  4N-3713 [1] SEAL-LIP TYPE  
63. 132-2117 [1] HOUSING AS-PUMP  
64. 9N-5821 [2] DEFLECTOR-PULSE  
65. 4N-1826 [2] DOWEL  
66. 2D-6392 [2] SEAL-O-RING  
67. 4N-2333 [1] PIN-SPRING  
68. 8N-0984 [8] PIN-SPRING  
69. 4N-5481 [1] STUD  
70. 9S-4180 [1] PLUG  
71. 4J-7533 [1] SEAL-O-RING  
72. 4N-0940 [1] LEVER-SHUTOFF  
73. 124-5942 [1] SHAFT-SOLENOID  
74. 4N-0532 [1] GASKET-COVER  
75. 4N-0531 [1] COVER-IDLE SCREW  
76. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
77. 4N-0938 [1] SHAFT-LEVER  
78. 127-7139 [1] GASKET-TOP COVER  
79. 1P-4001 [1] FITTING  
80. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
81. 9F-6641 [4] BOLT (5/16-18X1.25-IN)  
82. 4N-2954 [1] SLEEVE-CAMSHAFT  
83. 4N-1132 [1] BODY AS-TRANSFER PUMP  
84. 8S-6814 [1] PIN  
85. 4N-1584 [1] SEAL-LIP TYPE  
86. 4N-0636 [1] SEAL-LIP TYPE  
87. 8H-9804 [1] SHAFT-PUMP IDLER  
88. 4N-0429 [1] GEAR-PUMP (15-TEETH)  
89. 4N-0406 [1] GEAR-PUMP (10-TEETH)  
90. 5M-6509 [1] SEAL-O-RING  
91. 4N-1767 [1] VALVE-BYPASS  
92. 4N-0605 [1] SPRING  
93. 4N-4276 [1] SEAT-SPRING  
94. 4N-6408 [1] PISTON AS  
95. 4N-6406 [1] RING-SPACER  
96. 4N-6404 [1] RING-RETAINING  
97. 4N-6407 [1] SPOOL-DASHPOT  
98. 6N-2517 [1] SPRING-DASHPOT  
99. 2W-8623 [1] SEAT-SPRING  
100. 4N-0434 [1] RISER-GOVERNOR  
101. 4N-2927 [2] RACE-THRUST BEARING  
102. 4N-2953 [1] RING-LOCK  
103. 4N-3779 [1] KEY-CAMSHAFT  
104. 122-9003 [1] CAMSHAFT AS  
105. 8N-2663 [1] CARRIER-WEIGHT  
106. 8N-2662 [3] BOLT-SOCKET HEAD  
107. 4N-1723 [1] SHIELD-CARRIER  
108. 4N-0425 [3] WEIGHT-GOVERNOR  
109. 4N-0511 [3] DOWEL  
110. 4N-5482 [1] SHAFT-WEIGHT CARRIER  
111. 4N-9019 [1] DOWEL  
112. 9N-5822 [1] WASHER-THRUST  
113. 7M-7219 [1] BEARING-THRUST  
 

#KEBP00820192
 

4W-6069: PUMP GP-GOV, FUEL INJ & TFR

4W-6069 PUMP GP-GOV, FUEL INJ & TFR
S/N 73W1-UP
DIRECT
PART OF 123-0204 ENGINE AR
i00379848 KEBP0082
4W6069 PUMP GP-GOV, FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3336 Y [1] FASTENER GP-FUEL INJ PUMP  
2. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
3. 4N-1104 [1] GASKET  
4. 9L-6447 [1] SPRING  
5. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)(FLAT)  
  2N-0828 [2] WASHER (SPRING)  
6. 4W-6013 Y [1] GOVERNOR GP  
7. 4N-4267 Y [1] TORQUE CONTROL GP  
8. 5L-7812 [2] BOLT (5/16-18X0.75-IN)  
  5N-4185 [2] WASHER-SPECIAL  
9. 4N-5656 [1] COVER  
  2P-8643 [1] GASKET  
10. 4W-6068 Y [1] PUMP GP-FUEL INJECTION  
  4N-1868 [1] GASKET  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820193
 

9N-6519: SEPARATOR GP-WATER

9N-6519 SEPARATOR GP-WATER
S/N 5XC138-UP
PART OF 7R-3057 SUPPLY GP-FUEL
i00439149 KEBP0082
9N6519 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9802 [1] CLAMP  
2. 8N-9801 [1] BASE-SEPARATOR  
3. 6V-2611 [2] VALVE (DRAIN)(WATER)  
4. 3K-8460 [2] PLUG (1/2-20-THD)  
5. 8N-9803 [1] FILTER-FUEL (WATER SEPARATOR)  
6. 5P-4675 [2] ADAPTER  
7. 1J-9671 [6] SEAL-O-RING  
 

#KEBP00820194
 

7R-3057: SUPPLY GP-FUEL

7R-3057 SUPPLY GP-FUEL
S/N 5XC138-142
PART OF 7X-8302 POWER PACK GP
i00416345 KEBP0082
7R3057 SUPPLY GP-FUEL Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-6519 Y [1] SEPARATOR GP-WATER  
2. 8C-6870 [2] CONNECTOR  
3. 087-0332 I [2] HOSE AS  
4. 087-0333 I [1] HOSE AS  
5. 6V-9200 [1] ELBOW  
6. 6V-9872 [1] CONNECTOR  
7. 087-0334 I [1] HOSE AS  
8. 2T-2305 [2] ELBOW  
9. 086-9671 I [1] HOSE AS  
10. 7R-7129 A [2] TUBE AS  
11. 6V-8397 [10] SEAL-O-RING  
12. 3J-7354 [2] SEAL-O-RING  
13. 7R-7965 [1] NUT  
14. 7R-7957 [2] NUT  
15. 086-9286 [2] CLAMP  
16. 3V-0046 [1] PLATE  
17. 8C-6561 [1] BOLT (5/16-18X1.375-IN)  
18. 7R-7907 [4] CLAMP  
19. 7R-7954 [1] PLATE  
20. 7R-7959 [2] BOLT-SPECIAL (1/4-20X1.12-IN)  
21. 4M-5282 [2] BOLT (1/4-20X1.5-IN)  
22. 7V-5628 [1] PLATE  
23. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
24. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
25. 6V-8801 [2] NUT (3/8-16-THD)  
26. 7R-7227 A [1] TUBE AS  
27. 7R-7228 A [1] TUBE AS  
  A   NOT PART OF THIS GROUP
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820195
 

7R-3057: SUPPLY GP-FUEL

7R-3057 SUPPLY GP-FUEL
S/N 5XC143-UP
PART OF 7X-8302 POWER PACK GP
i00416349 KEBP0082
7R3057 SUPPLY GP-FUEL Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-6519 Y [1] SEPARATOR GP-WATER  
2. 8C-6870 C [2] CONNECTOR  
3. 087-0332 I [2] HOSE AS  
4. 087-0333 I [1] HOSE AS  
5. 7X-0901 C [1] ELBOW  
6. 8T-5043 C [1] ADAPTER  
7. 087-0334 I [1] HOSE AS  
8. 2T-2305 [2] ELBOW  
9. 086-9671 I [1] HOSE AS  
10. 6V-9850 C [1] ELBOW  
11. 6V-8397 C [11] SEAL-O-RING  
12. 1J-9671 C [1] SEAL-O-RING  
13. 7R-7965 [1] NUT  
14. 7R-7957 [2] NUT  
15. 7R-8439 [2] CLAMP  
16. 3V-0046 [1] PLATE  
17. 8C-6561 [1] BOLT (5/16-18X1.375-IN)  
18. 7R-7907 [4] CLAMP  
19. 7R-7954 [1] PLATE  
20. 7R-7959 [2] BOLT-SPECIAL (1/4-20X1.12-IN)  
21. 4M-5282 [2] BOLT (1/4-20X1.5-IN)  
22. 7V-5628 [1] PLATE  
23. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
24. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
25. 6V-8801 [2] NUT (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820196
 

082-0720: TANK GP-FUEL

082-0720 TANK GP-FUEL
S/N 5XC138-UP
PART OF 082-0707 FRAME AR
i00456788 KEBP0082
0820720 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-3616 [1] TANK-FUEL  
2. 086-9930 E [1] TUBE  
3. 8T-4590 [1] CAP  
4. 8C-7978 [1] STRAINER (FUEL TANK)  
5. 8T-9398 [2] BOLT (3/4-10X1.75-IN)  
6. 8T-4994 [3] WASHER-HARD (20X36.5X3.5-MM THK)  
7. 002-6453 [2] ELBOW  
8. 082-2812 [2] COUPLING-HOSE  
9. 1F-8488 [1] BREATHER AS (FUEL TANK)  
10. 8T-9397 [1] BOLT (3/4-10X1.25-IN)  
11. 5D-8412 [3] SCREW-ROUND HEAD (8-32X0.5-IN)  
  E   ORDER BY THE CENTIMETER
 

#KEBP00820197
 

4N-4267: TORQUE CONTROL GP

4N-4267 TORQUE CONTROL GP
S/N 73W1-UP
PART OF 4W-6069 PUMP GP-GOV, FUEL INJ & TFR
i00147616 KEBP0082
4N4267 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6452 [1] INSULATOR  
2. 1P-9958 [1] INSULATOR  
3. 2S-7391 [1] BAR-STOP  
4. 3S-0602 [1] RETAINER-SPRING  
5. 4N-4218 [1] CONTACT  
6. 8M-9062 [1] RETAINER-SPRING (3.05-MM THK)  
7. 9L-7235 B [1] SHIM (0.040-IN THK)  
8. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
  B   USE AS REQUIRED
 

#KEBP00820198
 

6N-0509: TORQUE CONTROL GP

6N-0509 TORQUE CONTROL GP
S/N 79V25199-UP
PART OF 122-9000 PUMP GP-GOV & FUEL INJ
i00405651 KEBP0082
6N0509 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6452 [2] INSULATOR  
2. 8M-9064 [1] SHIM-SPRING  
3. 4L-7124 [1] BOLT (1/4-20X1.25-IN)  
4. 4N-3882 [1] CONTACT-STOP  
5. 4N-3881 [1] SCREW  
6. 9M-1311 [1] NUT-JAM (1/4-28-THD)  
7. 4N-3884 [1] WASHER-SPRING  
8. 4N-3883 [1] BAR-LOAD STOP  
9. 4L-6458 [1] NUT-FULL (1/4-20-THD)  
 

#KEBP00820199
 

7C-4120: ADAPTER GP-SENSOR

7C-4120 ADAPTER GP-SENSOR
S/N 73W1-UP
PART OF 123-0204 ENGINE AR
i00406400 KEBP0082
7C4120 ADAPTER GP-SENSOR Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-0522 B [1] SEAL-O-RING  
2. 2B-0858 [1] PLUG-PIPE  
3. 7W-2967 [1] ADAPTER  
4. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
  5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 4K-8651 [1] TAB  
6. 6F-6405 B [1] SPACER (0.438X0.75X0.375-IN THK)  
  B   USE AS REQUIRED
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups
1985/04/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Australia
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-CFEL
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-CSARL
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Americas
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Brazil
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Specifications
Fuel Injection Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Automatic Timing Advance Unit
3208 INDUSTRIAL ENGINE
Drive Gear For The Injection Pump
3208 INDUSTRIAL ENGINE
Fuel Injection Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Automatic Timing Advance Unit
3208 INDUSTRIAL ENGINE
Drive Gear For The Injection Pump
3208 INDUSTRIAL ENGINE
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Asia
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-APD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing
3208 INDUSTRIAL ENGINE
Check Valve And Bypass Valve
3208 INDUSTRIAL ENGINE
Fuel Injection Pumps
3208 INDUSTRIAL ENGINE
Automatic Timing Advance
3208 INDUSTRIAL ENGINE
Governor & Fuel Pump Drive
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing & Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing
3208 INDUSTRIAL ENGINE
Shutoff Housing, Check Valve & Bypass Valve
3208 INDUSTRIAL ENGINE
Fuel Injection Pumps
3208 INDUSTRIAL ENGINE
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Caterpillar Parts SIS Catalog PR-1000 :

PUMP GP-GOV & FUEL INJ
122-9000 PUMP GP-GOV & FUEL INJ
PUMP GP-FUEL TRANSFER
4W-5477 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
4N-1101 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL PRIMING
4N-4314 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
PUMP GP-FUEL INJECTION
7W-0561 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-6068 PUMP GP-FUEL INJECTION
PROTECTION GP-FUEL SYSTEM
129-2992 PROTECTION GP-FUEL SYSTEM
PUMP GP-GOV & FUEL INJ
122-9002 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV, FUEL INJ & TFR
4W-6069 PUMP GP-GOV, FUEL INJ & TFR
SEPARATOR GP-WATER
9N-6519 SEPARATOR GP-WATER
SUPPLY GP-FUEL
7R-3057 SUPPLY GP-FUEL
SUPPLY GP-FUEL
7R-3057 SUPPLY GP-FUEL
TANK GP-FUEL
082-0720 TANK GP-FUEL
TORQUE CONTROL GP
4N-4267 TORQUE CONTROL GP
TORQUE CONTROL GP
6N-0509 TORQUE CONTROL GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.