AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8C-7017 PLANETARY GP-FINAL DRIVE S/N 5XC138-UP PART OF 082-0762, 082-0763, 7R-6428 TRACK GP PR-1000 COLD PLANER


POWER TRAIN
DRIVE GP-FINAL
PUMP GP
FRAME AND BODY
BOX GP
COUNTERWEIGHT GP
FRAME GP
LADDER GP
UNDERCARRIAGE
LINK GP-TRACK
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
UNDERCARRIAGE
ROLLER GP

COLD PLANER PR-1000 COLD PLANER 5XC
 PR-1000C Cold Planer 5XC00138-UP (MACHINE) POWERED BY 3208 Engine KEBP0082 PR-1000 5XC   (1985)

POWER TRAIN

DRIVE GP-FINAL
PLANETARY GP-FINAL DRIVE
078-0448 PLANETARY GP-FINAL DRIVE
PLANETARY GP-FINAL DRIVE
8C-7017 PLANETARY GP-FINAL DRIVE
 

#KEBP00820270
 

8C-7017: PLANETARY GP-FINAL DRIVE

8C-7017 PLANETARY GP-FINAL DRIVE
S/N 5XC138-UP
PART OF 082-0762, 082-0763, 7R-6428 TRACK GP
i00428852 KEBP0082
8C7017 PLANETARY GP-FINAL DRIVE Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-7146 [1] SPINDLE  
    -OR-
  081-9271 [1] SPINDLE & HUB AS  
2. 7X-7147 [1] SEAL  
3. 2P-1373 [2] CUP-BEARING  
4. 2P-1374 [2] CONE-BEARING  
5. 7X-7150 [1] SHIM  
6. 7X-7151 [1] RING  
7. 081-9272 [1] HUB  
8. 081-9273 [1] GEAR-INTERNAL  
9. 077-9990 [1] RING-RETAINING  
10. 081-9274 [1] CARRIER AS  
11. 077-3963 [3] PIN  
12. 7K-8876 [6] CUP-BEARING  
13. 7K-8877 [6] CONE-BEARING  
14. 7X-7155 [3] SHAFT  
15. JZ [3] GEAR (38-TEETH)  
16. 7X-7156 [3] SPACER  
17. 1T-0205 [3] RING-SNAP  
18. 7X-7158 [1] GEAR-RING  
19. 7X-7159 [2] SEAL  
20. 034-5654 [1] RING-RETAINING  
21. 081-9275 [1] COVER AS  
  081-7101 [1] COVER  
22. 077-9996 LN [1] CAP  
23. 4M-5281 LN [4] BOLT (1/4-20X0.75-IN)  
24. 7X-7160 L [1] CAP (DISCONNECT)  
25. 7X-7161 L [1] ROD (DISCONNECT)  
26. 8F-9206 LN [1] SEAL-O-RING  
27. 4L-7711 LN [1] SEAL-O-RING  
28. 9F-2247 LN [1] PLUG-PIPE  
29. 077-8388 [1] PLUG-MAGNETIC  
30. 3B-4510 [4] LOCKWASHER  
31. 3B-4508 [16] LOCKWASHER  
32. 7X-0332 [16] BOLT (1/2-13X4.5-IN)  
33. 7X-7168 [4] BOLT  
34. 077-4382 [1] RING  
35. 077-4890 [1] RING-RETAINING  
36. 7X-7163 L [1] SHAFT  
37. 7X-7164 [1] SPACER  
38. 081-9114 [1] GEAR (INPUT)  
39. 7X-7165 [1] SPACER (THRUST)  
40. 5P-7683 [4] RACE-THRUST BEARING  
41. 1T-0706 [2] BEARING (THRUST)  
42. 077-4202 [2] WASHER  
43. 7X-7162 [1] SPRING  
44. 081-7103 [1] COUPLING  
45. 7X-6789 N [1] COLLAR  
46. 7X-6790 N [1] DOWEL  
47. 077-7466 N [1] RACE-THRUST BEARING  
48. 8T-0715 N [1] BEARING-THRUST  
49. 124-8811 N [1] CAP-DISCONNECT  
50. 106-8710 N [1] ROD-DISCONNECT  
51. 077-7467 N [1] RACE-THRUST BEARING  
52. 8J-2283 N [1] RING-SNAP  
53. 107-0080 N [1] SHAFT-INPUT  
   
    AVAILABLE REPAIR KIT(S):
  110-8758 J [1] KIT-GEAR  
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  L   USE SHAFT MARKED L WITH PARTS MARKED L
  N   USE SHAFT MARKED N WITH PARTS MARKED N
  Z   NOT SERVICED SEPARATELY
 

#KEBP00820271
 

136-3814: PUMP & MTG GP-PROPEL

136-3814 PUMP & MTG GP-PROPEL
S/N 5XC148-153
PART OF 8C-7162 PUMP GP-HYDRAULIC
i00502081 KEBP0082
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  130-1808 Y [1] PUMP GP-PISTON (PROPEL)  
   
  6V-5258 B [1] ADAPTER  
  7D-4092 B [1] CLIP  
  6V-8633 [2] CONNECTOR  
  6V-9008 B [1] ELBOW  
  6V-9851 B [1] ELBOW  
  6V-9850 B [2] ELBOW  
  7R-3916 BI [2] HOSE AS  
  5E-7997 BI [1] HOSE AS  
  7R-7893 BI [1] HOSE AS  
  3D-2824 [2] SEAL-O-RING  
  6V-8398 B [1] SEAL-O-RING  
  6V-8397 B [2] SEAL-O-RING  
  7M-8485 B [1] SEAL-O-RING  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820272
 

082-0713: BOX GP-AIR

082-0713 BOX GP-AIR
S/N 5XC138-UP
PART OF 082-0707 FRAME AR
i00456756 KEBP0082
0820713 BOX GP-AIR Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 082-0838 [1] COVER  
2. 082-0839 [1] COVER  
3. 082-0840 [2] FLASHING  
4. 082-0841 [2] FLASHING  
5. 082-0842 [1] FLASHING  
6. 082-0843 [2] FLASHING  
7. 082-0844 [1] FLASHING  
8. 082-0845 [1] COVER  
9. 086-9006 [1] BOX  
10. 082-0851 [2] HOLD-DOWN  
11. 082-0852 [2] HOLD-DOWN  
12. 082-0853 [1] HOLD-DOWN  
13. 082-0854 [1] HOLD-DOWN  
14. 082-0859 [1] SEAL  
15. 082-0860 [1] HOLD-DOWN  
16. 8T-8908 [14] BOLT (1/4-20X1-IN)  
  6V-8185 [14] NUT (1/4-20-THD)  
17. 9B-7237 [85] BOLT (3/8-16X1.25-IN)  
18. 8T-4896 [145] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 6V-8801 [56] NUT (3/8-16-THD)  
20. 8T-4205 [28] WASHER-HARD (7.2X14.5X2-MM THK)  
 

#KEBP00820273
 

8T-4039: COUNTERWEIGHT GP

8T-4039 COUNTERWEIGHT GP
S/N 5XC138-UP
PART OF 1C-4209 SENSOR GP-GRADE
i00427002 KEBP0082
8T4039 COUNTERWEIGHT GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-0482 [1] ARM  
2. 8T-4282 [1] COUNTERWEIGHT  
3. 8H-0708 [1] BOLT (1/4-20X0.5-IN)  
4. 8H-3127 [3] BOLT (1/4-20X0.75-IN)  
5. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
 

#KEBP00820274
 

082-0707: FRAME AR

082-0707 FRAME AR
S/N 5XC138-UP
PART OF 6R-1073 GENERAL AR
i00841604 KEBP0082
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7R-3339 Y [1] FRAME GP  
  082-0713 Y [1] BOX GP-AIR  
  082-0714 Y [1] LADDER GP  
  082-0715 Y [1] PLATFORM GP  
  082-0716 Y [1] TANK GP-WATER  
  082-0717 Y [1] TANK GP-WATER  
  082-0718 Y [1] TANK GP-HYDRAULIC  
  082-0719 Y [1] TANK GP-WATER  
  082-0720 Y [1] TANK GP-FUEL  
  082-0721 Y [1] LEG GP  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00820275
 

7R-3339: FRAME GP

7R-3339 FRAME GP
S/N 5XC138-UP
PART OF 082-0707 FRAME AR
i00416455 KEBP0082
7R3339 FRAME GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7R-9591 [1] FRAME AS  
2. 082-0677 [1] COVER  
3. 8T-8917 [4] BOLT (1/2-13X1.25-IN)  
4. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 7R-5701 [1] COVER (LH)  
6. 5M-3062 [8] BOLT (3/8-16X0.75-IN)  
7. 8T-4896 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 7F-9524 [2] LUG  
9. 4L-6454 [2] BOLT (3/8-16X1-IN)  
10. 7R-5700 [1] COVER (RH)  
11. 081-6930 [1] PIN  
12. 7R-3324 [1] BAR  
13. 5P-8837 [1] LOCK PIN  
14. 4S-8033 [1] PIN-SECONDARY BAR  
15. 7R-0581 A [4] PLATE  
  A   NOT PART OF THIS GROUP
 

#KEBP00820276
 

082-0714: LADDER GP

082-0714 LADDER GP
S/N 5XC138-UP
PART OF 082-0707 FRAME AR
i00456758 KEBP0082
0820714 LADDER GP Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6R-1219 [1] HANDRAIL AS (LH)  
2. 082-0667 [1] HANDRAIL  
3. 082-0668 [1] HANDRAIL (RH)  
4. 5E-4765 [1] RAIL  
5. 082-0678 [3] ANGLE  
6. 7R-3323 [1] RAIL (LEFT SIDE)  
7. 6R-1104 C [1] HANDRAIL  
8. 082-0835 [1] LADDER  
9. 6R-1103 C [2] HANDRAIL  
10. 3K-6060 [2] LOCKNUT (3/8-16-THD)  
11. 082-0846 [1] LADDER (LOWER)  
12. 7R-3322 [1] BRACKET  
13. 7R-9818 [1] HANDRAIL AS  
14. 082-0855 [1] GUARD (RADIATOR)  
15. 6R-1218 [1] HANDRAIL AS  
16. 9B-7237 [19] BOLT (3/8-16X1.25-IN)  
17. 6R-1941 [2] CONNECTOR  
18. 5P-2228 [7] BOLT (1/2-13X1-IN)  
19. 7X-0335 [2] BOLT (1/2-13X5.25-IN)  
20. 8T-8927 [2] BOLT (1-8X3.75-IN)  
21. 6V-8801 [21] NUT (3/8-16-THD)  
22. 6R-1939 [1] SNAP  
23. 6V-8188 [8] NUT (1/2-13-THD)  
24. 6V-8190 [2] NUT (1-8-THD)  
25. 1D-6306 [2] NUT (1-8-THD)  
26. 8T-4896 [42] WASHER-HARD (10.2X18.5X2.5-MM THK)  
27. 8T-5360 [2] WASHER (12X22.5X2.5-MM THK)  
28. 8T-4223 [23] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-5361 [4] WASHER-HARD (28X49X5-MM THK)  
30. 3B-4611 [2] PIN-COTTER  
31. 011-4786 [2] PIN  
32. 7R-9858 [1] SUPPORT (HANDRAIL)  
33. 9N-7197 [6] WASHER (BEVELED)  
34. 8T-4835 [2] BOLT (1/2-13X2-IN)  
35. 6R-1216 [1] LADDER AS  
36. 5P-2424 [4] BOLT (1/2-13X2.25-IN)  
37. 6R-1940 [1] CHAIN  
38. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
39. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
40. 4L-9337 [1] BOLT (3/8-16X1.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00820277
 

9W-2379: LINK AS-TRACK

9W-2379 LINK AS-TRACK
S/N 5XC138-UP
PART OF 4C-1877 TRACK GP
i00447409 KEBP0082
9W2379 LINK AS-TRACK Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9K-0028 [1] LINK-TRACK (LH)(MASTER)  
2. 9K-4062 [1] PIN (MASTER)  
3. 7K-2018 [128] WASHER  
4. 7K-2020 [1] BUSHING-TERMINAL (MASTER)  
5. 9K-6628 [31] LINK-TRACK (LH)  
6. 9K-4060 [31] PIN  
7. 9K-4061 [31] BUSHING-TERMINAL  
8. 9K-6629 [31] LINK-TRACK (RH)  
9. 9K-0029 [1] LINK-TRACK (RH)(MASTER)  
10. 9K-4059 [2] SPACER  
 

#KEBP00820278
 

8T-4037: MOUNT AS-SENSOR

8T-4037 MOUNT AS-SENSOR
S/N 5XC138-UP
PART OF 1C-4209 SENSOR GP-GRADE
i00426995 KEBP0082
8T4037 MOUNT AS-SENSOR Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5E-9596 [1] TUBE  
2. 4H-1641 [1] PIN-SPRING  
3. 8C-1318 [1] SCALE  
4. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 9N-7936 [1] SCREW  
6. 8C-9271 [1] CRANK AS  
  4H-1641 [1] PIN-SPRING  
7. 5E-9597 [1] TUBE  
 

#KEBP00820279
 

118-1608: ROLLER GP-TRACK

118-1608 ROLLER GP-TRACK
S/N 5XC138-UP
PART OF 9P-7783 ROLLER GP-TRACK-SINGLE FLANGE
FIELD REPLACEMENT FOR 9P-7783 ROLLER GP-TRACK-SINGLE FLANGE
i00732880 KEBP0082
1181608 ROLLER GP-TRACK Parts scheme
  For full view, you need register

Parts for your PR-1000 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-1616 [2] COLLAR-TRACK ROLLER  
2. 118-1610 [1] SHAFT-TRACK ROLLER  
3. 179-1292 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  1M-3097 [2] RING-SEALING  
4. 2P-3201 [12] BOLT-WASHER HEAD (3/8-16X1-IN)  
5. 1H-8128 [2] SEAL-O-RING  
6. 1V-9611 [2] BUSHING AS-ROLLER  
    (EACH AS INCLUDES)
  9B-2289 [2] PIN  
7. 9P-7782 [1] RIM AS-SINGLE FLANGE  
8. 7F-8267 [2] SEAL-O-RING  
9. 6H-7382 [2] RING-LOCK  
10. 6Y-0473 [1] PLUG-CLEAR  
11. 7G-4332 [1] STOPPER  
 

Information:

Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15

Caterpillar Parts SIS Catalog PR-1000 :

PLANETARY GP-FINAL DRIVE
078-0448 PLANETARY GP-FINAL DRIVE
LINES GP-PROPEL
7R-9637 LINES GP-PROPEL
LINES GP-PROPEL
7R-9637 LINES GP-PROPEL
WIRING GP-LIGHTING
7R-9707 WIRING GP-LIGHTING
WIRING GP-ENGINE
7R-9709 WIRING GP-ENGINE
WIRING GP-ENGINE
6R-4016 WIRING GP-ENGINE
WIRING GP-ENGINE
6R-4015 WIRING GP-ENGINE
WIRING GP-CONSOLE
7R-9706 WIRING GP-CONSOLE
136-3814 PUMP & MTG GP-PROPEL
BOX GP-AIR
082-0713 BOX GP-AIR
COUNTERWEIGHT GP
8T-4039 COUNTERWEIGHT GP
082-0707 FRAME AR
FRAME GP
7R-3339 FRAME GP
LADDER GP
082-0714 LADDER GP
LINK AS-TRACK
9W-2379 LINK AS-TRACK
MOUNT AS-SENSOR
8T-4037 MOUNT AS-SENSOR

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.