AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6I-2946 FILTER & LINES GP-FUEL S/N 98Z16010-UP PART OF 133-4249 ENGINE AR AP-1000 ASPHALT PAVER


FUEL SYSTEM
FILTER GP-FUEL
LINES GP-FUEL
FUEL GP-SCREED
GOVERNOR GP

ASPHALT PAVER AP-1000 ASPHALT PAVER 1HD
 AP-1000 Asphalt Paver 1HD00001-UP (MACHINE) POWERED BY 3116 Engine KEBP0084 AP-1000 1HD   (1991)

FUEL SYSTEM

FILTER GP-FUEL
FILTER & LINES GP-FUEL
6I-2946 FILTER & LINES GP-FUEL
FILTER GP-FUEL
1N-3476 FILTER GP-FUEL
FILTER GP-FUEL
6I-2693 FILTER GP-FUEL
PUMP GP-FUEL PRM & PRIM FILTER
8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
 

#KEBP00840160
 

6I-2946: FILTER & LINES GP-FUEL

6I-2946 FILTER & LINES GP-FUEL
S/N 98Z16010-UP
PART OF 133-4249 ENGINE AR
i00157903 KEBP0084
6I2946 FILTER & LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your AP-1000 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5218 M [4] BOLT (M8X1.25X35-MM)  
2. 6V-8724 [1] ELBOW  
3. 3J-1907 [2] SEAL-O-RING  
4. 8W-5425 I [1] HOSE AS  
5. 6V-8397 [6] SEAL-O-RING  
6. 4P-9936 [1] BASE  
7. 5F-7054 [1] SEAL-O-RING  
8. 6V-2317 M [4] BOLT (M8X1.25X30-MM)  
9. 7E-5190 [1] TUBE AS  
10. 7E-5189 [1] VALVE AS (FUEL)  
11. 8T-0151 [1] ADAPTER  
12. 002-9372 [2] CLIP  
13. 8T-8902 [1] ADAPTER-TEE  
14. 2T-2305 [1] ELBOW  
15. 8T-5043 [1] ADAPTER  
16. 1J-9671 [1] SEAL-O-RING  
17. 9C-7323 I [1] HOSE AS  
18. 4N-8897 [1] BASE AS-FUEL FILTER  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
19. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
20. 9M-1974 [9] WASHER-HARD (8.8X16X2-MM THK)  
21. 5P-7970 M [2] NUT (M8X1.25-THD)  
22. 7C-1159 [1] GASKET  
23. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
24. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
25. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
26. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
27. 5P-7813 [1] SEAL-O-RING  
28. 3N-3252 [1] SPRING  
29. 6V-9850 [1] ELBOW  
30. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
31. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
32. 4P-2413 [1] PLATE  
33. 6V-1820 M [3] BOLT (M10X1.5X30-MM)  
34. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
35. 7X-7729 [2] WASHER (11X25X3-MM THK)  
36. 6N-4414 [1] COVER-FILTER BASE  
37. 1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#KEBP00840161
 

1N-3476: FILTER GP-FUEL

1N-3476 FILTER GP-FUEL
S/N 2WG1242-99999
PART OF 7C-9226 ENGINE AR
i00121944 KEBP0084
1N3476 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your AP-1000 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 B [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 6V-9607 BM [2] BOLT (M8X1.25X120-MM)  
3. 4W-5158 [1] BASE AS  
  9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
4. 7C-1159 [1] GASKET  
5. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
6. 1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
7. 244-3712 [1] PLUG AS  
7A. 214-7568 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP00840162
 

6I-2693: FILTER GP-FUEL

6I-2693 FILTER GP-FUEL
S/N 98Z3000-16009
PART OF 112-1684 ENGINE AR
FOR USE WITH @@@@@ 1N-3477@@@@@
ALSO AN ATTACHMENT
i00122203 KEBP0084
6I2693 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your AP-1000 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 B [4] WASHER-HARD (8.8X16X2-MM THK)  
2. 6V-9607 BM [2] BOLT (M8X1.25X120-MM)  
3. 3J-1907 [1] SEAL-O-RING  
4. 7C-1159 [1] GASKET  
5. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
6. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
7. 9S-4191 [1] PLUG (9/16-18-THD)  
8. 6I-4802 C [1] BASE AS  
  6I-4801 C [1] INSERT-FILTER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP00840163
 

9Y-0283: FITTING GP-FUEL LINES

9Y-0283 FITTING GP-FUEL LINES
S/N 98Z16010-UP
PART OF 133-4249 ENGINE AR
i00436217 KEBP0084
  For full view, you need register

Parts for your AP-1000 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5P-4924 [2] ELBOW  
  3J-1907 [2] SEAL-O-RING  
 

#KEBP00840164
 

087-0490: FUEL GP-SCREED

087-0490 FUEL GP-SCREED
S/N 1HD170-UP
PART OF 7X-9158 SCREED AR
AN ATTACHMENT
i00462687 KEBP0084
0870490 FUEL GP-SCREED Parts scheme
  For full view, you need register

Parts for your AP-1000 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 082-2387 [1] MANIFOLD  
2. 8T-9377 C [2] BOLT (3/8-16X2.25-IN)  
3. 8T-4896 C [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 6V-8801 C [2] NUT (3/8-16-THD)  
5. 5R-6307 [1] COUPLER AS-QUICK DISCONNECT (FEMALE)  
  1H-8171 [1] SEAL-O-RING  
  5R-6859 [1] RETAINER  
6. 5R-6301 [1] PLUG-DUST  
7. 3J-1907 C [1] SEAL-O-RING  
8. 6V-8641 C [1] CONNECTOR  
9. 4J-5477 C [18] SEAL-O-RING  
10. 7R-6657 C [1] HOSE AS  
11. 7R-7906 [2] CLAMP  
12. 7V-5628 [1] PLATE (TOP)  
13. 4M-5282 [2] BOLT (1/4-20X1.5-IN)  
14. 8J-1256 [3] CLIP  
15. 8T-9925 [1] BUSHING-TERMINAL (9/16-18 STR-THD)  
  3K-0360 [1] SEAL-O-RING  
16. 087-0481 I [2] HOSE AS  
17. 087-0482 I [2] HOSE AS  
18. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 8T-8908 [2] BOLT (1/4-20X1-IN)  
  6V-8185 [2] NUT (1/4-20-THD)  
20. 7X-5331 [2] ELBOW  
21. 6V-8993 [4] UNION  
22. 6V-8628 [1] ELBOW  
23. 3J-7354 [6] SEAL-O-RING  
24. 9S-4182 [1] PLUG (7/16-20-THD)  
25. 4S-6399 [4] CONNECTOR  
26. 129-3078 [4] VALVE AS-SHUTOFF  
27. 8C-6866 [4] CONNECTOR  
28. 087-0479 I [2] HOSE AS  
29. 7X-0440 [4] BOLT (5/16-18X1.75-IN)  
30. 4V-0612 [4] PLATE  
31. 7R-7962 [8] CLAMP  
32. 087-0491 [2] ADAPTER  
33. 7R-0057 [4] VALVE  
34. 087-0480 I [2] HOSE AS  
35. 5E-2176 [2] CLAMP  
36. 2P-1279 [4] LOCKNUT (9/16-18-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP00840165
 

115-2544: GOVERNOR GP

115-2544 GOVERNOR GP
S/N 98Z16010-UP
PART OF 113-6219 GOVERNOR GP-UNIT INJECTOR
i00490797 KEBP0084
1152544 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your AP-1000 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-3062 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 117-1147 [1] CAM AS  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 100-4391 [1] SPRING-OIL SIDE  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00840166
 

100-6179: GOVERNOR GP-UNIT INJECTOR

100-6179 GOVERNOR GP-UNIT INJECTOR
S/N 98Z1-UP
PART OF 4P-5512 GOVERNOR GP-UNIT INJECTOR
i00195192 KEBP0084
1006179 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your AP-1000 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 C [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER-SHAFT  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN-SPRING  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 8T-8895 M [1] SETSCREW-SOCKET (M4X0.7X16-MM)  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE CAM  
34. 7C-6205 [1] PLUG  
35. 6V-8189 [1] NUT (5/16-18-THD)  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 6I-4514 [1] HOUSING AS  
40. Z [1] SHAFT-LEVER  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 5C-2874 M [2] NUT (M5X0.8-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 4P-3539 [1] LEVER-THROTTLE  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 C [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)(UNIT INJECTOR)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. Z [1] PLUG  
55. 4P-3537 [1] RING-TOLERANCE  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#KEBP00840167
 

113-6219: GOVERNOR GP-UNIT INJECTOR

113-6219 GOVERNOR GP-UNIT INJECTOR
S/N 98Z16010-UP
PART OF 133-4249 ENGINE AR
i00541530 KEBP0084
  For full view, you need register

Parts for your AP-1000 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  115-2544 Y [1] GOVERNOR GP  
  135-1716 Y [1] LINES GP-GOVERNOR OIL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00840168
 

131-4852: GOVERNOR GP-UNIT INJECTOR

131-4852 GOVERNOR GP-UNIT INJECTOR
S/N 98Z1-UP
PART OF 4P-5512 GOVERNOR GP-UNIT INJECTOR
i00195239 KEBP0084
1314852 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your AP-1000 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 8T-8895 M [1] SETSCREW-SOCKET (M4X0.7X16-MM)  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 7C-6205 [1] PLUG  
35. 6V-8189 [1] NUT (5/16-18-THD)  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 6I-4514 [1] HOUSING AS  
40. 2S-4078 [1] SEAL-O-RING  
41. 4P-4000 [1] SPRING-LEVER  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 5C-2874 M [2] NUT (M5X0.8-THD)  
44. 128-4794 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 4P-3539 [1] LEVER-THROTTLE  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)(UNIT INJECTOR)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
55. 4P-3537 [1] RING-TOLERANCE  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 109-4587 [1] RING-TOLERANCE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#KEBP00840169
 

133-3062: GOVERNOR GP-UNIT INJECTOR

133-3062 GOVERNOR GP-UNIT INJECTOR
S/N 98Z16010-UP
PART OF 115-2544 GOVERNOR GP
i00123890 KEBP0084
1333062 GOVERNOR GP-UNIT INJECTOR Parts scheme 1333062 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your AP-1000 ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7325 [1] HOUSING AS  
  100-5734 [1] SHAFT-LIMIT  
2. 129-3897 [1] VALVE  
3. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 4P-3539 [1] LEVER-THROTTLE  
5. 4P-3537 [1] RING-TOLERANCE  
6. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
7. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
8. 5C-2874 M [1] NUT (M5X0.8-THD)  
9. 100-5740 [1] SPRING-TORSION  
10. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
11. 6V-8189 [1] NUT (5/16-18-THD)  
12. 100-5732 [1] LEVER-TORQUE CAM  
13. 105-9790 [1] BRACKET AS  
  8N-0984 [1] PIN-SPRING  
14. 100-5736 M [1] SCREW (M6X0.5X22.5-MM)  
15. 100-5738 M [1] NUT (M6X0.5-THD)  
16. 101-1167 M [2] SCREW-BUTTON HEAD (M5X0.8X14-MM)  
17. 7C-5480 [1] SPRING-TORSION  
18. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
19. 4P-7351 [1] LEVER AS-SHAFT  
20. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
21. 107-7498 [1] BLOCK AS-BEARING  
22. 7E-3217 [1] LEVER AS  
23. 3P-3547 [1] RING-RETAINING  
24. 8C-8546 M [1] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
25. 7C-4483 [1] SCREEN AS (OIL INLET)(UNIT INJECTOR)  
26. 100-5742 [1] LEVER AS-CONTROL  
  100-5733 [1] PIN  
27. 100-5739 [1] SPRING-TORSION  
28. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
29. 8T-7060 [1] RING-RETAINING  
30. 100-8311 [1] RING (TOLERANCE)  
31. 7C-5148 [1] CARRIER-FLYWEIGHT  
32. 2S-7316 [2] DOWEL  
33. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
34. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
35. 4P-8947 [1] RISER  
36. 4P-0737 [1] SHAFT-RISER  
37. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
38. 8T-0269 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
39. 7L-3386 [1] SEAL-O-RING  
40. 7C-5884 [1] COVER-OIL SUMP  
41. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
42. 4P-4231 [1] COVER-REAR  
43. 6V-5100 [1] SEAL-O-RING  
44. 7C-5883 B [7] SHIM (0.25-MM THK)  
45. 7W-5591 [1] SEAT-GOVERNOR SPRING  
46. 7C-3776 [1] PISTON AS  
46A. 4N-6407 [1] SPOOL-DASHPOT  
46B. 4N-6404 [1] RING-RETAINING  
46C. 4N-6406 [1] RING-SPACER  
47. 4P-8948 [1] SEAT AS-SPRING  
  [1] INSERT  
48. 7W-8993 [2] WEIGHT  
49. 7C-5541 [2] PLATE  
50. 7W-1440 B [8] SHIM (0.12-MM THK)  
51. 115-1192 [1] SEAL-GOVERNOR HOUSING  
52. 7C-2743 [2] RACE  
53. 7W-5561 [1] BEARING-THRUST  
54. 8C-5061 [1] RING-RETAINING  
55. 8C-8546 M [8] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
56. 7C-5150 [1] PIN  
57. 117-9099 [1] FLANGE  
58. 9Y-1837 [1] SPRING  
59. 125-8158 [1] SLEEVE-RACK CONTROL  
60. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
61. 5P-9757 [1] SEAL-O-RING  
62. 109-4587 [1] RING-TOLERANCE  
63. 6D-9953 [1] PIN-SPRING  
64. 8T-1460 [2] RING-RETAINING  
65. 108-1612 [1] CLEVIS  
66. 7C-8854 [1] PIN-CLEVIS  
67. 108-1613 [1] PISTON-SERVO  
68. 8C-3312 [1] RING-RETAINING  
69. 114-2897 [1] COVER-FUEL RATIO CONTROL  
70. 7N-2171 [1] RING-RETAINING  
71. 7W-5324 [1] BEARING  
72. 115-2553 [1] VALVE-GOVERNOR SERVO  
73. 100-4390 [1] SPRING  
74. 7W-1691 [1] WASHER (19.15X35X3-MM THK)  
75. 129-4284 [1] SEAT-SPRING  
76. 6I-1564 [1] DIAPHRAGM  
77. 114-2899 [1] RETAINER-DIAPHRAGM  
78. 100-4392 [1] SPRING-SERVO  
79. 100-4394 [1] SEAT-SPRING  
80. 8N-5763 [1] SEAL  
81. 8N-5764 [1] PISTON  
82. 100-4393 [1] SPRING-RETURN  
83. 100-4397 [1] BODY-VALVE  
84. 100-5737 M [1] SETSCREW-ADJUSTMENT  
85. 100-5738 M [1] NUT (M6X0.5-THD)  
86. 2M-9780 [2] SEAL-O-RING  
87. 128-4786 [2] PLUG  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Improved Seal on Fuel Filter {1261}
2007/07/30
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Special Instruction
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Service Letter-NACD
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Service Letter-Australia
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Service Letter-CFEL
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Filter Base
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Fuel Filter and Water Separator
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Fuel Filter (Primary)
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Letter-China
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Service Letter-Asia
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Service Letter-APD
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
Product Support Program For Installing New Fuel Pressure Bypass Valve And Improved Fuel Filter On Certain E110B, E120B, E200B, EL200B, E240B, EL240B, E240C, EL240C, 320, 320 L, 325, And 325 L Excavators; 446 Backhoe Loaders; CS563 And CP563 Compactors; IT12B And IT14B Toolcarriers; 910E And 950F Loaders; And 3114 And 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
All 6I4783 Fuel Filters Need To Be Removed From Parts Stock And Machines In Dealer Inventory Equipped With 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Certain 1R0751 Fuel Filters Need To Be Removed From Parts Stock And From Machines In Dealer Inventory Equipped With 3114 And 3116 Engines
Disassembly and Assembly
Fuel Priming Pump
3116 ENGINE SUPPLEMENT FOR AP-1000 ASPHALT PAVER
Fuel Filter
3116 ENGINE SUPPLEMENT FOR AP-1000 ASPHALT PAVER
Fuel Priming Pump and Primary Fuel Filter - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Fuel Filter Base - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Do Not Prefill Secondary Fuel Filter {1261,1290}
1989/05/22
Procedure To Lessen Governor Control Lever Effort{1265}
1989/11/06
New Fuel Inlet Fitting Eliminates Breakage; New Screen Used In Inlet Fitting{1250,1252,1261}
1990/03/05
Preventive Maintenance (PM) Kits Available For 3116 Truck Engines{7258,0645,1261,1318,1352,7542}
1990/03/05
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
New Filter Used For Screed Burner And Washdown Systems {1274,5642}
1994/12/19
New "High Efficiency" Fuel Filters Help Prevent Worn Injectors{1261}
1995/07/31
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Improved Seal on Fuel Filter {1261}
2005/09/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2007/07/30
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14

Caterpillar Parts SIS Catalog AP-1000 :

FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
6I-0232 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
4P-4775 DRIVE GP-GOV & TRANSFER PUMP
DRIVE GP-GOV & TRANSFER PUMP
4P-0666 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-GOVERNOR
7E-9429 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
7W-6989 CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
FILTER GP-FUEL
1N-3476 FILTER GP-FUEL
FILTER GP-FUEL
6I-2693 FILTER GP-FUEL
9Y-0283 FITTING GP-FUEL LINES
FUEL GP-SCREED
087-0490 FUEL GP-SCREED
GOVERNOR GP
115-2544 GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
100-6179 GOVERNOR GP-UNIT INJECTOR
113-6219 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-4852 GOVERNOR GP-UNIT INJECTOR

Truck sale:

Caterpillar AP1000F, Construction
250,000 
Caterpillar AP1000F, Construction
- Asphalt pavers
CATERPILLAR FINANCIAL SERVICES CORPORATION
Netherlands
Caterpillar AP1000F, Construction
289,000 
Caterpillar AP1000F, Construction
- Asphalt pavers
HOLT CAT
Caterpillar AP1000F, Construction
271,000 
Caterpillar AP1000F, Construction
- Asphalt pavers
HOLT CAT
Caterpillar AP1000F, Construction
268,000 
Caterpillar AP1000F, Construction
- Asphalt pavers
HOLT CAT
 
286,000 
Caterpillar AP1000F, Construction
- Asphalt pavers
YANCEY BROS. CO.
GA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.