AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1W-5082 CYLINDER BLOCK GP S/N 48W39842-UP PART OF 6I-2450 ENGINE AR PR-450C COLD PLANER


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

COLD PLANER PR-450C COLD PLANER 7PJ
 PR-450C Cold Planer 7PJ00001-UP (MACHINE) POWERED BY 3408 Engine KEBP0092 PR-450C 7PJ   (1992)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
4N-6866 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK AS
110-3779 CYLINDER BLOCK AS
CYLINDER BLOCK AS
122-2245 CYLINDER BLOCK AS
CYLINDER BLOCK AS
1W-5081 CYLINDER BLOCK AS
CYLINDER BLOCK GP
1W-5082 CYLINDER BLOCK GP
CYLINDER BLOCK GP
1W-5082 CYLINDER BLOCK GP
CYLINDER BLOCK GP
1W-5084 CYLINDER BLOCK GP
 

#KEBP00920020
 

1W-5082: CYLINDER BLOCK GP

1W-5082 CYLINDER BLOCK GP
S/N 48W39842-UP
PART OF 6I-2450 ENGINE AR
i00107807 KEBP0092
1W5082 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-4990 [8] JET AS-PISTON COOLING  
2. 4N-1650 [4] DOWEL  
3. 8T-6763 [4] PLUG-PIPE (1/4-18-THD)  
4. 110-3779 CY [1] CYLINDER BLOCK AS  
5. 8T-6757 [7] PLUG-PIPE  
6. 6N-9133 [2] GASKET-PLATE  
7. 6I-4613 [2] PLATE-SPACER  
8. 4N-0693 [3] PLUG-TAPERLOCK (1-1/2-12-THD)  
    -OR-
  7C-9614 [3] PLUG-TAPERLOCK (1-5/8-12-THD)  
9. 4N-0683 [4] DOWEL  
10. 7E-6479 [8] BOLT-SPECIAL (OIL JET)  
11. 3B-0645 [1] PLUG-CUP  
12. 6L-4428 [3] STUD-TAPERLOCK (3/8-16X4.01-IN)  
13. 114-4427 C [2] SEAL-O-RING  
14. 7W-6534 [2] PLUG-PIPE  
15. 5P-8356 [2] SEAL-O-RING  
16. 3S-6605 [2] PLUG-CUP  
17. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
18. 8T-6764 B [1] PLUG-PIPE (1/8-27-THD)  
19. 7C-7407 [1] STUD  
20. 7W-6534 J [1] PLUG-PIPE  
21. 9S-4190 BJ [2] PLUG-O-RING (7/8-14-THD)  
  114-4427 BCJ [2] SEAL-O-RING  
22. 7W-6534 J [1] PLUG-PIPE  
23. 7W-6534 B [1] PLUG-PIPE  
24. 7W-6534 B [1] PLUG-PIPE  
   
  4W-6061 AFL SLEEVE  
  4W-4588 AFN SLEEVE-LIFTER BORE  
  9Y-3368 AFN INSERT-LINER SEAT (0.822-MM THK)  
  6I-4361 AFN INSERT-LINER SEAT (0.772-MM THK)  
  6I-4362 AFN INSERT-LINER SEAT (0.872-MM THK)  
  2W-3815 AFN INSERT-LINER SEAT (1.605-MM THK)  
  6I-4363 AFN INSERT-LINER SEAT (1.555-MM THK)  
  6I-4364 AFN INSERT-LINER SEAT (1.655-MM THK)  
  5N-0093 AFN INSERT-LINER SEAT (2.71-MM THK)  
  6I-4365 AFN INSERT-LINER SEAT (2.66-MM THK)  
  6I-4366 AFN INSERT-LINER SEAT (2.76-MM THK)  
  101-0523 AFN INSERT-LINER SEAT (5.21-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  J   MOUNTED ON LH SIDE OF CYLINDER BLOCK
  L   FOR SALVAGE OF BOTTOM LINER O-RING BORE, QUANTITY TO BE DETERMINED BY USER
  N   FOR SALVAGE OF DAMAGED CYL BLOCK LIFTER BORES REFER TO SEBF8076 IN SIS WEB
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920021
 

1W-5084: CYLINDER BLOCK GP

1W-5084 CYLINDER BLOCK GP
S/N 48W34000-39841
FIELD REPLACEMENT FOR @@@@@ 1W-5081@@@@@
i00107808 KEBP0092
1W5084 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-7410 [6] PLUG-PIPE (9.53MM PIPE THD)  
2. 9S-4190 [4] PLUG-O-RING (7/8-14-THD)  
  2M-9780 [4] SEAL-O-RING  
3. 9F-2247 C [7] PLUG-PIPE (3.18MM PIPE THD)  
4. 3J-5389 [2] PLUG (EXTERNAL)(12.70MM PIPE THD)  
5. 4N-6658 [2] BUSHING (1.3-IN WIDE)  
6. 3S-6605 [2] PLUG-CUP (8.05MM OD)  
7. 4N-0685 [3] BUSHING (1-IN WIDE)  
8. 3B-0645 [1] PLUG-CUP (32.08MM OD)  
9. 7E-6479 C [8] BOLT-SPECIAL (OIL JET)  
10. 7W-4990 C [8] JET AS-PISTON COOLING  
11. 4N-0693 [3] PLUG-TAPERLOCK (1-1/2-12-THD)(38.10MM OD)  
    -OR-
  7C-9614 C [3] PLUG-TAPERLOCK (1-5/8-12-THD)(41.28MM OD)  
12. 7H-3171 [4] PLUG-PIPE  
13. 4N-5858 [5] CAP (CRANKSHAFT BEARING)  
14. 3P-1323 [10] BOLT-BEARING CAP (7/8-14X7.75-IN)  
  9H-1031 [10] WASHER-HARD (24X41.5X6-MM THK)  
15. 5M-6214 C [1] PLUG (1/8-27 PTF)  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00920022
 

105-3788: CYLINDER HEAD AS

105-3788 CYLINDER HEAD AS
S/N 48W35357-UP
PART OF 7W-2224 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7W-2225@@@@@
i00093513 KEBP0092
1053788 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [6] PLUG-CUP  
2. 4N-5893 [8] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [8] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 3B-0623 [8] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#KEBP00920023
 

143-0040: CYLINDER HEAD AS

143-0040 CYLINDER HEAD AS
S/N 48W41034-UP
PART OF 143-0041, 7W-2225 CYLINDER HEAD AS
FIELD REPLACEMENT ORDER @@@@@143-0041@@@@@
i00566895 KEBP0092
1430040 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [6] PLUG-CUP  
2. 4N-5893 [8] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [8] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 3B-0623 [8] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#KEBP00920024
 

143-0041: CYLINDER HEAD AS

143-0041 CYLINDER HEAD AS
S/N 48W41034-UP
PART OF 141-1207 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@143-0040@@@@@
ALSO FIELD INSTALLATION
i00566896 KEBP0092
1430041 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0040 Y [1] CYLINDER HEAD AS  
2. 173-7188 [16] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920025
 

7W-2223: CYLINDER HEAD AS

7W-2223 CYLINDER HEAD AS
S/N 48W34000-35356
PART OF 7W-2224 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7W-2225@@@@@
i00108210 KEBP0092
7W2223 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [6] PLUG-CUP  
2. 4N-5893 [8] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 ABF INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 ABF INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 ABF INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 ABF INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [8] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 ABF INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 ABF INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 3B-0623 [8] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
 

#KEBP00920026
 

7W-2225: CYLINDER HEAD AS

7W-2225 CYLINDER HEAD AS
S/N 48W35357-UP
FIELD REPLACEMENT FOR @@@@@ 7W-2223@@@@@, @@@@@105-3788@@@@@
i00093453 KEBP0092
7W2225 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0040 Y [1] CYLINDER HEAD AS  
2. 2N-5775 [8] DOWEL  
3. 173-7188 [16] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920027
 

141-1207: CYLINDER HEAD GP

141-1207 CYLINDER HEAD GP
S/N 48W41034-UP
PART OF 4W-7005 CYLINDER HEAD GP
i00567840 KEBP0092
1411207 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-0041 Y [1] CYLINDER HEAD AS  
2. 122-0322 [8] VALVE-INLET  
3. 2A-4429 [32] LOCK-RETAINER  
4. 6N-7175 [16] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7154 [1] ROTOCOIL AS  
4A. 6N-7174 [1] SHIELD-OIL  
5. 4N-5906 [16] SPRING-VALVE  
6. 122-0321 [8] VALVE-EXHAUST  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920028
 

4W-7005: CYLINDER HEAD GP

4W-7005 CYLINDER HEAD GP
S/N 48W34000-34694
PART OF 6I-2450 ENGINE AR
i00107975 KEBP0092
4W7005 CYLINDER HEAD GP Parts scheme 4W7005 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8071 C [1] BRACKET-FUEL PUMP  
2. 3B-1915 C [1] BOLT (3/8-16X1.375-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1608 C [1] BOLT (3/8-16X3.75-IN)  
5. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
6. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
7. 6N-6731 [1] SUPPORT-HOUSING (LH)  
8. 7E-7308 [2] GASKET-CYLINDER HEAD  
9. 2H-3750 [28] BOLT (3/4-16X7.5-IN)  
10. 5H-1504 [28] WASHER-HARD (20X33.5X5-MM THK)  
11. 7W-2224 Y [2] CYLINDER HEAD GP  
12. 0L-1352 C [7] BOLT (3/8-16X3.25-IN)  
  0L-1352 CB [4] BOLT (3/8-16X3.25-IN)  
13. 4N-0932 B [2] PLUG-CUP  
14. 5P-0063 B [4] PLUG-CUP  
15. 7W-5435 [8] ADAPTER-NOZZLE  
16. 4W-1055 [32] SEAL  
17. 4S-6137 [16] STUD-TAPERLOCK (3/8-16X3.1-IN)  
18. 1B-5174 [2] PLUG-PIPE  
19. 2B-0858 [6] PLUG-PIPE  
20. 4N-7253 [8] GASKET-CHAMBER  
21. 5M-6214 B [2] PLUG (1/8-27 PTF)  
22. 6N-6732 [1] SUPPORT-HOUSING (RH)  
23. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
24. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
25. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
26. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
27. 8S-9191 [2] BOLT (3/8-16X4-IN)  
28. 1W-5207 [1] BRACKET-FUEL PUMP  
29. 5H-7153 [8] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920029
 

4W-7005: CYLINDER HEAD GP

4W-7005 CYLINDER HEAD GP
S/N 48W34695-41033
PART OF 6I-2450 ENGINE AR
i00107976 KEBP0092
4W7005 CYLINDER HEAD GP Parts scheme 4W7005 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8071 C [1] BRACKET-FUEL PUMP  
2. 3B-1915 C [1] BOLT (3/8-16X1.375-IN)  
3. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1608 C [1] BOLT (3/8-16X3.75-IN)  
5. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
6. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
7. 6N-6731 [1] SUPPORT-HOUSING (LH)  
8. 7E-7308 [2] GASKET-CYLINDER HEAD  
9. 2H-3750 [28] BOLT (3/4-16X7.5-IN)  
10. 5H-1504 [28] WASHER-HARD (20X33.5X5-MM THK)  
11. 7W-2224 Y [2] CYLINDER HEAD GP  
12. 0L-1352 C [7] BOLT (3/8-16X3.25-IN)  
13. 8T-6764 C [1] PLUG-PIPE (1/8-27-THD)  
14. 0L-1352 CB [4] BOLT (3/8-16X3.25-IN)  
15. 4N-0932 B [2] PLUG-CUP  
16. 5P-0063 B [4] PLUG-CUP  
17. 100-6920 C [8] ADAPTER-NOZZLE  
18. 3E-6772 [32] SEAL (WATER)  
19. 106-1792 [16] STUD-TAPERLOCK (3/8-16X4-IN)  
20. 7X-7731 C [2] PLUG-PIPE (3/4-14-THD)  
21. 8T-6762 C [4] PLUG-PIPE (1/2-14-THD)  
22. 4N-7253 [8] GASKET-CHAMBER  
23. 8T-6764 C [1] PLUG-PIPE (1/8-27-THD)  
24. 6N-6732 [1] SUPPORT-HOUSING (RH)  
25. 5B-2638 [1] BOLT (3/8-16X5.25-IN)  
26. 1A-5183 [1] BOLT (3/8-16X4.75-IN)  
27. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
29. 8S-9191 [2] BOLT (3/8-16X4-IN)  
30. 1W-5207 [1] BRACKET-FUEL PUMP  
31. 8M-5249 C [8] SEAL-O-RING  
32. 8T-6762 CB [2] PLUG-PIPE (1/2-14-THD)(LH)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Special Instruction
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24
The Cylinder Liners Have a New Appearance {1216}
2005/03/14

Caterpillar Parts SIS Catalog PR-450C :

CYLINDER BLOCK GP
1W-5082 CYLINDER BLOCK GP
CYLINDER BLOCK AS
1W-5081 CYLINDER BLOCK AS
CYLINDER BLOCK AS
122-2245 CYLINDER BLOCK AS
CYLINDER BLOCK AS
110-3779 CYLINDER BLOCK AS
CRANKSHAFT GP
1W-5010 CRANKSHAFT GP
CRANKSHAFT AS
1W-5009 CRANKSHAFT AS
COVER GP-VALVE MECHANISM
6I-4622 COVER GP-VALVE MECHANISM
COVER GP-OIL PAN
6N-3894 COVER GP-OIL PAN
CYLINDER BLOCK GP
1W-5084 CYLINDER BLOCK GP
CYLINDER HEAD AS
105-3788 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0040 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0041 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2223 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2225 CYLINDER HEAD AS
CYLINDER HEAD GP
141-1207 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7005 CYLINDER HEAD GP

Truck sale:

1992 CAT PR-450C
USD $57,500 
1992 CAT PR-450C

Gateway Machinery, LLC
Syracuse, New York
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.