AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6R-0311 CLUTCH GP-POWER TAKE-OFF S/N 7PJ1-UP PART OF 1G-6818 CLUTCH GP-POWER TAKE-OFF PR-450C COLD PLANER


IMPLEMENTS
CLUTCH GP-POWER TAKE-OFF
CONTROL GP
CONVEYOR GP
COUPLING GP

COLD PLANER PR-450C COLD PLANER 7PJ
 PR-450C Cold Planer 7PJ00001-UP (MACHINE) POWERED BY 3408 Engine KEBP0092 PR-450C 7PJ   (1992)

IMPLEMENTS

CLUTCH GP-POWER TAKE-OFF
CLUTCH GP-POWER TAKE-OFF
1G-6818 CLUTCH GP-POWER TAKE-OFF
CLUTCH GP-POWER TAKE-OFF
6R-0311 CLUTCH GP-POWER TAKE-OFF
 

#KEBP00920290
 

6R-0311: CLUTCH GP-POWER TAKE-OFF

6R-0311 CLUTCH GP-POWER TAKE-OFF
S/N 7PJ1-UP
PART OF 1G-6818 CLUTCH GP-POWER TAKE-OFF
i00394541 KEBP0092
6R0311 CLUTCH GP-POWER TAKE-OFF Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1C-4963 [1] PLATE-BACKING  
2. 8C-2260 [16] SPRING (RELEASE)  
3. 8C-1475 [1] GASKET (SPINDLE)  
4. 081-7666 [4] BOLT  
5. 1G-8911 [1] KEY  
6. 081-7082 [1] LOCKNUT  
7. 1C-4964 [1] LOCKWASHER  
8. 9N-8230 [1] HUB  
9. 1C-3759 [2] DISC-FRICTION  
10. 1C-4965 [2] PLATE (CENTER)  
11. 081-7668 [1] RING  
12. 081-9205 [1] HOUSING  
13. 081-9206 [2] COVER (HAND HOLE)  
14. 081-9207 [4] BOLT  
15. 8C-1474 [1] PLATE-PRESSURE  
16. 8C-2261 [1] TUBE-AIR  
17. 1C-4358 [1] PLATE-AIR TUBE  
18. 081-9203 [2] ELBOW  
19. 7X-9916 I [2] HOSE AS  
20. 8L-3282 [2] CONNECTOR  
21. 081-7669 [1] SETSCREW  
22. 081-7670 [4] BOLT  
23. 081-7671 [3] SHIM  
24. 081-7672 [1] SPACER  
25. 081-9208 [4] PLUG-PIPE  
26. 081-9209 [1] RETAINER-BEARING  
27. 3B-8485 [2] ELBOW  
28. 081-7083 [6] BOLT  
29. 6R-0310 [1] SHAFT  
30. 081-9212 [2] RETAINER (SEAL)  
31. 081-7084 [2] SPACER  
32. 8C-2262 [1] ROTOSEAL  
33. 061-6665 [12] BOLT (1/2-13X1.25-IN)  
34. 8C-2263 [2] SEAL (OIL)  
35. 9N-8232 [2] BEARING  
36. 081-7085 [1] SPACER (BEARING)  
37. 1F-1362 [12] BOLT-SOCKET HEAD  
38. 8C-2264 [1] GASKET (ROTOSEAL)  
39. 8C-1800 [1] FITTING-PRESSURE RELIEF  
40. 8C-2266 [1] ROTOSEAL AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP00920291
 

101-4898: CONTROL GP-BACKUP

101-4898 CONTROL GP-BACKUP
S/N 7PJ1-UP
PART OF 1G-6905, 1G-7517, 1G-7525 ROTOR AR
AN ATTACHMENT
i00463716 KEBP0092
1014898 CONTROL GP-BACKUP Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-4901 [1] TUBE AS  
2. 101-4899 [1] SUPPORT AS  
3. 2R-1376 [8] SPACER (0.594X0.75X1.09-IN THK)  
4. 101-4904 [2] PLATE  
5. 101-4905 [1] PLATE  
6. 101-4906 [1] PLATE  
7. 101-4908 [4] BUSHING-OILITE  
8. 3S-0999 [4] SPACER  
9. 8T-4896 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
11. 8T-9377 [4] BOLT (3/8-16X2.25-IN)  
12. 7X-0291 [2] BOLT (3/8-16X3.75-IN)  
13. 5P-8837 [3] LOCK PIN  
14. 6V-8801 [6] NUT (3/8-16-THD)  
15. 8B-1056 [3] PIN-CLEVIS  
 

#KEBP00920292
 

1G-6187: CONVEYOR AR

1G-6187 CONVEYOR AR
S/N 7PJ1-UP
PART OF 6R-3975 GENERAL AR
i00351164 KEBP0092
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  103-1928 Y [1] CONVEYOR GP-SECOND STAGE  
  7R-4049 Y [1] SUPPORT GP-SECOND STAGE  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920293
 

082-2714: CONVEYOR AR-FIRST STAGE

082-2714 CONVEYOR AR-FIRST STAGE
S/N 7PJ1-UP
PART OF 6R-3975 GENERAL AR
i00457067 KEBP0092
0822714 CONVEYOR AR-FIRST STAGE Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-9418 [1] BAR  
2. 7R-7265 [1] DEFLECTOR  
3. 7X-3563 [1] SUPPORT-FLASHING  
4. 7X-3564 [1] SUPPORT-FLASHING  
5. 8C-0998 [2] FLASHING  
6. 8C-0843 [2] FLASHING  
7. 7X-3565 [6] BRACKET (ROLLER)  
8. 8C-2903 [1] SHAFT-TAIL PULLEY  
9. 7X-3567 [4] MOUNT (LOWER CONVEYOR)  
10. 9N-9429 [2] ROD-THREADED  
11. 082-3021 [1] SHAFT-HEAD PULLEY  
12. 082-3022 [1] FRAME AS  
13. 9N-7307 [1] RETAINER  
14. 8C-2794 [1] FRAME (TAKE-UP)  
15. 8T-6301 [1] BEARING (TAKE-UP)  
16. 8C-0963 [2] RETAINER  
17. 082-2895 [1] BOLT  
18. 082-2896 [1] PLATE  
19. 8T-6300 [2] BEARING-FLANGE  
20. 8T-4252 [3] IDLER (RETURN)  
21. 8C-0789 [1] PULLEY GP-CONVEYOR  
22. 082-2861 [1] PULLEY-HEAD  
23. 082-2864 [1] BELT-CONVEYOR (SMOOTH)  
24. 4S-8033 [4] PIN-SECONDARY BAR  
25. 8C-3866 Y [1] MOTOR GP-PISTON  
26. 082-2846 [1] BLOCK (PORT)  
27. 082-2847 [1] NUT  
28. 082-2848 [1] BLOCK-MOUNTING  
29. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
30. 4L-6454 [50] BOLT (3/8-16X1-IN)  
31. 8T-9377 [7] BOLT (3/8-16X2.25-IN)  
32. 5P-2228 [16] BOLT (1/2-13X1-IN)  
33. 8T-8917 [10] BOLT (1/2-13X1.25-IN)  
34. 5P-2566 [14] BOLT (1/2-13X1.5-IN)  
35. 8T-8919 [8] BOLT (1/2-13X1.75-IN)  
36. 8T-4835 [4] BOLT (1/2-13X2-IN)  
37. 8T-9393 [12] BOLT (5/8-11X1.5-IN)  
38. 6V-8801 [14] NUT (3/8-16-THD)  
39. 6V-8188 [20] NUT (1/2-13-THD)  
40. 6V-8190 [1] NUT (1-8-THD)  
41. 1D-5118 [8] NUT-JAM (5/8-11-THD)  
42. 8T-4896 [64] WASHER-HARD (10.2X18.5X2.5-MM THK)  
43. 8T-4223 [66] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4122 [16] WASHER-HARD (17X32X3.5-MM THK)  
45. 7R-7266 [4] RETAINER  
46. 7R-7267 [1] DEFLECTOR  
47. 3B-4621 [1] PIN-COTTER  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920294
 

082-2714: CONVEYOR AR-FIRST STAGE

082-2714 CONVEYOR AR-FIRST STAGE
S/N 7PJ1-45
PART OF 6R-3975 GENERAL AR
i00457069 KEBP0092
0822714 CONVEYOR AR-FIRST STAGE Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-2228 [4] BOLT (1/2-13X1-IN)  
2. 1D-5118 [8] NUT-JAM (5/8-11-THD)  
3. 8T-4122 [16] WASHER-HARD (17X32X3.5-MM THK)  
4. 9N-9429 [2] ROD-THREADED  
5. 8C-2794 [1] FRAME  
6. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
7. 9N-7307 [1] RETAINER  
8. 8T-4223 [62] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8C-0963 [2] RETAINER  
10. 6V-8188 [20] NUT (1/2-13-THD)  
11. 8T-6300 [2] BEARING-FLANGE  
12. 5P-0370 [4] LOCK PIN  
13. 8T-6301 [1] BEARING  
14. 8T-8919 [8] BOLT (1/2-13X1.75-IN)  
15. 4S-8033 [4] PIN-SECONDARY BAR  
16. 7X-3567 [4] MOUNT  
17. 9N-9419 [1] DEFLECTOR  
18. 7R-7266 [4] RETAINER  
19. 4L-6454 [34] BOLT (3/8-16X1-IN)  
20. 6V-8801 [15] NUT (3/8-16-THD)  
21. 5P-1075 [14] WASHER-HARD (10.2X22.5X3-MM THK)  
22. 8T-9377 [7] BOLT (3/8-16X2.25-IN)  
23. 9N-9418 [1] BAR  
24. 7X-0578 [41] WASHER-HARD (10.2X32X2.5-MM THK)  
25. 8T-9393 [6] BOLT (5/8-11X1.5-IN)  
26. 082-3021 [1] SHAFT-HEAD PULLEY  
27. 082-2861 [1] PULLEY-HEAD  
28. 7X-3564 [1] SUPPORT-FLASHING  
29. 8C-0998 [2] FLASHING  
30. 7X-3563 [1] SUPPORT-FLASHING  
31. 5P-2566 [14] BOLT (1/2-13X1.5-IN)  
32. 8C-0843 [2] FLASHING  
33. 8T-8917 [14] BOLT (1/2-13X1.25-IN)  
34. 102-3690 Y [1] MOTOR GP-PISTON  
35. 2P-8454 [6] BOLT (5/8-11X1.5-IN)  
36. 082-2848 [1] BLOCK-MOUNTING  
37. 082-2847 [1] NUT  
38. 082-2846 [1] BLOCK  
39. 9B-7237 [12] BOLT (3/8-16X1.25-IN)  
40. 8T-4835 [12] BOLT (1/2-13X2-IN)  
41. 7X-3565 [6] BRACKET  
42. 082-2896 [1] PLATE  
43. 082-3022 [1] FRAME AS  
44. 8C-2903 [1] SHAFT-TAIL PULLEY  
45. 8C-0789 [1] PULLEY GP-CONVEYOR  
46. 082-2864 [1] BELT-CONVEYOR  
47. 6V-8190 [1] NUT (1-8-THD)  
48. 082-2895 [1] BOLT  
49. 8T-4252 [3] IDLER  
  086-9847 FY [1] SPRAY GP-WATER  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920295
 

082-2714: CONVEYOR AR-FIRST STAGE

082-2714 CONVEYOR AR-FIRST STAGE
S/N 7PJ46-56
PART OF 6R-3975 GENERAL AR
i00457071 KEBP0092
0822714 CONVEYOR AR-FIRST STAGE Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-2228 [4] BOLT (1/2-13X1-IN)  
2. 1D-5118 [8] NUT-JAM (5/8-11-THD)  
3. 8T-4122 [16] WASHER-HARD (17X32X3.5-MM THK)  
4. 9N-9429 [2] ROD-THREADED  
5. 8C-2794 [1] FRAME  
6. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
7. 9N-7307 [1] RETAINER  
8. 8T-4223 C [60] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8C-0963 [2] RETAINER  
10. 6V-8188 [20] NUT (1/2-13-THD)  
11. 8T-6300 [2] BEARING-FLANGE  
12. 5P-0370 [4] LOCK PIN  
13. 8T-6301 [1] BEARING  
14. 8T-8919 [8] BOLT (1/2-13X1.75-IN)  
15. 4S-8033 [4] PIN-SECONDARY BAR  
16. 7X-3567 [4] MOUNT  
17. 9N-9419 [1] DEFLECTOR  
18. 7R-7266 C [2] RETAINER  
19. 4L-6454 [34] BOLT (3/8-16X1-IN)  
20. 6V-8801 C [15] NUT (3/8-16-THD)  
21. 5P-1075 C [16] WASHER-HARD (10.2X22.5X3-MM THK)  
22. 8T-9377 [7] BOLT (3/8-16X2.25-IN)  
23. 9N-9418 [1] BAR  
24. 7X-0578 C [7] WASHER-HARD (10.2X32X2.5-MM THK)  
25. 8T-9393 [6] BOLT (5/8-11X1.5-IN)  
26. 082-3021 [1] SHAFT-HEAD PULLEY  
27. 082-2861 [1] PULLEY-HEAD  
28. 7X-3564 [1] SUPPORT-FLASHING  
29. 8C-0998 [2] FLASHING  
30. 7X-3563 [1] SUPPORT-FLASHING  
31. 5P-2566 C [2] BOLT (1/2-13X1.5-IN)  
32. 8C-0843 [2] FLASHING  
33. 8T-8917 C [24] BOLT (1/2-13X1.25-IN)  
34. 102-3690 Y [1] MOTOR GP-PISTON  
35. 2P-8454 [6] BOLT (5/8-11X1.5-IN)  
36. 082-2848 [1] BLOCK-MOUNTING  
37. 082-2847 [1] NUT  
38. 082-2846 [1] BLOCK  
39. 9B-7237 C [12] BOLT (3/8-16X1.25-IN)  
40. 8T-4835 [12] BOLT (1/2-13X2-IN)  
41. 7X-3565 [6] BRACKET  
42. 082-2896 [1] PLATE  
43. 082-3022 [1] FRAME AS  
44. 8C-2903 [1] SHAFT-TAIL PULLEY  
45. 8C-0789 [1] PULLEY GP-CONVEYOR  
46. 082-2864 [1] BELT-CONVEYOR  
47. 6V-8190 [1] NUT (1-8-THD)  
48. 082-2895 [1] BOLT  
49. 104-1862 CJ [3] IDLER AS  
    (EACH INCLUDES)
  124-9073 [2] BRACKET  
50. 8T-4226 [30] WASHER-PLATED (10.5X45X3-MM THK)  
  086-9847 FY [1] SPRAY GP-WATER  
   
    AVAILABLE REPAIR KIT(S):
  111-5771 J [1] KIT-BEARING (AUGER CONVEYOR)  
    (INCLUDES SEALS, NUTS, SPACERS & BEARINGS)
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920296
 

117-8529: CONVEYOR AR-FIRST STAGE

117-8529 CONVEYOR AR-FIRST STAGE
S/N 7PJ56-UP
PART OF 6R-3975 GENERAL AR
i00477295 KEBP0092
1178529 CONVEYOR AR-FIRST STAGE Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-2228 [4] BOLT (1/2-13X1-IN)  
2. 1D-5118 [8] NUT-JAM (5/8-11-THD)  
3. 8T-4122 [16] WASHER-HARD (17X32X3.5-MM THK)  
4. 9N-9429 [2] ROD-THREADED  
5. 8C-2794 [1] FRAME  
6. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
7. 9N-7307 [1] RETAINER  
8. 8T-4223 [60] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8C-0963 [2] RETAINER  
10. 6V-8188 [20] NUT (1/2-13-THD)  
11. 8T-6300 [2] BEARING-FLANGE  
12. 5P-0370 [4] LOCK PIN  
13. 8T-6301 [1] BEARING  
14. 8T-8919 [8] BOLT (1/2-13X1.75-IN)  
15. 4S-8033 [4] PIN-SECONDARY BAR  
16. 114-1967 [4] PLATE  
17. 9N-9419 [1] DEFLECTOR  
18. 115-7489 [2] PLATE  
19. 4L-6454 [40] BOLT (3/8-16X1-IN)  
20. 6V-8801 [15] NUT (3/8-16-THD)  
21. 5P-1075 [16] WASHER-HARD (10.2X22.5X3-MM THK)  
22. 8T-9377 [7] BOLT (3/8-16X2.25-IN)  
23. 9N-9418 [1] BAR  
24. 7X-0578 [7] WASHER-HARD (10.2X32X2.5-MM THK)  
25. 8T-9393 [6] BOLT (5/8-11X1.5-IN)  
26. 082-3021 [1] SHAFT-HEAD PULLEY  
27. 082-2861 [1] PULLEY-HEAD  
28. 117-8531 [1] PLATE AS (LH)  
29. 115-1172 [2] FLASHING  
30. 117-8532 [1] PLATE AS (RH)  
31. 5P-2566 [2] BOLT (1/2-13X1.5-IN)  
32. 8C-0843 [2] FLASHING  
33. 8T-8917 [24] BOLT (1/2-13X1.25-IN)  
34. 102-3690 Y [1] MOTOR GP-PISTON  
35. 2P-8454 [6] BOLT (5/8-11X1.5-IN)  
36. 082-2848 [1] BLOCK-MOUNTING  
37. 082-2847 [1] NUT  
38. 082-2846 [1] BLOCK  
39. 8T-4226 [36] WASHER-PLATED (10.5X45X3-MM THK)  
40. 8T-4835 [12] BOLT (1/2-13X2-IN)  
41. 7X-3565 [6] BRACKET  
42. 082-2896 [1] PLATE  
43. 117-8530 [1] FRAME AS-CONVEYOR  
44. 8C-2903 [1] SHAFT-TAIL PULLEY  
45. 8C-0789 [1] PULLEY GP-CONVEYOR  
46. 106-7173 [1] BELT-CONVEYOR  
47. 6V-8190 [1] NUT (1-8-THD)  
48. 082-2895 [1] BOLT  
49. 104-1862 J [3] IDLER AS  
    (EACH INCLUDES)
  124-9073 [2] BRACKET  
50. 9B-7237 [12] BOLT (3/8-16X1.25-IN)  
51. 115-7494 [1] BOLT-TAKE UP  
52. 116-3020 [2] FLASHING  
53. 081-7923 [1] NUT-JAM  
  086-9847 FY [1] SPRAY GP-WATER  
   
    AVAILABLE REPAIR KIT(S):
  111-5771 J [1] KIT-BEARING (AUGER CONVEYOR)  
    (INCLUDES SEALS, NUTS, SPACERS & BEARINGS)
  F   NOT SHOWN
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920297
 

103-1928: CONVEYOR GP-SECOND STAGE

103-1928 CONVEYOR GP-SECOND STAGE
S/N 7PJ1-UP
PART OF 1G-6187 CONVEYOR AR
i00468640 KEBP0092
1031928 CONVEYOR GP-SECOND STAGE Parts scheme 1031928 CONVEYOR GP-SECOND STAGE Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1C-3905 [1] FLASHING  
2. 1C-4011 [2] FLASHING  
3. 4L-6454 [30] BOLT (3/8-16X1-IN)  
  7X-0578 [30] WASHER-HARD (10.2X32X2.5-MM THK)  
4. 081-7866 [1] HOPPER  
5. 5P-2228 [20] BOLT (1/2-13X1-IN)  
6. 8T-4223 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 8C-2794 [2] FRAME  
8. 8C-0963 [2] RETAINER  
9. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
10. 8T-6301 [2] BEARING  
11. 7X-3569 [1] SHAFT-TAIL PULLEY  
12. 1D-5118 [8] NUT-JAM (5/8-11-THD)  
13. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)(21MM OD)  
14. 9N-9429 [2] ROD-THREADED  
15. 8C-0468 [1] BELT-CONVEYOR  
16. 8C-0789 [1] PULLEY GP-CONVEYOR  
17. 101-7068 [1] BUSHING  
18. 081-7923 [2] NUT-JAM  
19. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
20. 8C-0963 [1] RETAINER  
21. 7X-3571 [1] BRACKET-HEAD PULLEY  
22. 8T-4223 [51] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 5P-2566 [4] BOLT (1/2-13X1.5-IN)  
24. 6V-8188 [3] NUT (1/2-13-THD)  
25. 8C-1306 [2] KEY  
26. 7X-3570 [1] SHAFT-HEAD PULLEY  
27. 7X-0352 [1] BOLT (5/8-11X4-IN)  
28. 6V-4432 [3] BOLT (1/2-13X4-IN)  
29. 8C-0844 [1] COUPLING  
30. 7X-0448 [1] NUT (5/8-11-THD)  
31. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)(21MM OD)  
32. 8T-8919 [8] BOLT (1/2-13X1.75-IN)  
33. 8T-6300 [2] BEARING-FLANGE  
34. 1G-5448 Y [1] LINES GP-CONVEYOR MOTOR  
35. 7X-3568 [1] FRAME AS-CONVEYOR  
36. 8T-9383 [16] BOLT (1/2-13X0.75-IN)  
37. 104-1862 J [4] IDLER AS  
    (EACH INCLUDES)
  124-9073 [2] BRACKET  
38. 1G-5449 Y [1] MOTOR GP-HYDRAULIC  
39. 8C-2135 [1] PULLEY GP-HEAD  
40. 101-7068 [2] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  111-5771 J [1] KIT-BEARING (AUGER CONVEYOR)  
    (INCLUDES SEALS, NUTS, SPACERS & BEARINGS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920298
 

6R-4008: CONVEYOR GP-SECOND STAGE

6R-4008 CONVEYOR GP-SECOND STAGE
S/N 7PJ1-UP
PART OF 1G-6187 CONVEYOR AR
i00397023 KEBP0092
6R4008 CONVEYOR GP-SECOND STAGE Parts scheme 6R4008 CONVEYOR GP-SECOND STAGE Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 082-3043 [1] FLASHING  
2. 082-3044 [2] FLASHING  
3. 4L-9337 [30] BOLT (3/8-16X1.5-IN)  
4. 082-3025 [1] HOPPER  
5. 5P-2228 [20] BOLT (1/2-13X1-IN)  
6. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 8C-2794 [2] FRAME  
8. 8C-0963 [2] RETAINER  
9. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
10. 8T-6301 [2] BEARING  
11. 7X-3569 [1] SHAFT-TAIL PULLEY  
12. 1D-5118 [8] NUT-JAM (5/8-11-THD)  
13. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
14. 9N-9429 [2] ROD-THREADED  
15. 8C-0468 [1] BELT-CONVEYOR  
16. 8C-0789 [1] PULLEY GP-CONVEYOR  
  101-7068 [2] BUSHING  
17. 081-7923 [2] NUT-JAM  
18. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
19. 8C-0963 [1] RETAINER  
20. 7X-3571 [1] BRACKET-HEAD PULLEY  
21. 8T-4223 [35] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 5P-2566 [4] BOLT (1/2-13X1.5-IN)  
23. 8C-2135 [1] PULLEY GP-HEAD  
  101-7068 [2] BUSHING  
24. 8C-1306 [2] KEY  
25. 7X-3570 [1] SHAFT-HEAD PULLEY  
26. 7X-0352 [1] BOLT (5/8-11X4-IN)  
27. 6V-4432 [3] BOLT (1/2-13X4-IN)  
28. 8C-0844 [1] COUPLING  
29. 7X-0448 [1] NUT (5/8-11-THD)  
30. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
31. 8T-8919 [8] BOLT (1/2-13X1.75-IN)  
32. 8T-6300 [2] BEARING-FLANGE  
33. 1G-5448 Y [1] LINES GP-CONVEYOR MOTOR  
34. 7X-3568 [1] FRAME AS-CONVEYOR  
34A. 9N-8163 [4] IDLER AS (EACH INCLUDES)  
34B. 8C-2128 [3] ROLLER  
34C. 8T-9963 [6] BEARING  
34D. 081-7058 [2] IDLER-SHAFT  
34E. 081-7059 [2] SHAFT-CENTER  
34F. 086-9069 [1] COVER-BEARING (LH)  
34G. 086-9097 [1] COVER-BEARING (RH)  
34H. 8T-4261 [8] IDLER AS (EACH INCLUDES)  
34J. 086-8622 [2] SHAFT-CENTER  
34K. 8C-2128 [3] ROLLER  
34L. 8T-9963 [6] BEARING  
34M. 081-7058 [2] IDLER-SHAFT  
34N. 086-9069 [1] COVER-BEARING (LH)  
34P. 086-9097 [1] COVER-BEARING (RH)  
35. 8T-4896 [30] WASHER-HARD (10.2X18.5X2.5-MM THK)  
36. 4J-8265 [30] NUT (3/8-16-THD)  
37. 7X-0578 [30] WASHER-HARD (10.2X32X2.5-MM THK)  
38. 8T-9383 [16] BOLT (1/2-13X0.75-IN)  
39. 104-1862 J [4] IDLER AS  
    (EACH INCLUDES)
  124-9073 [2] BRACKET  
40. 1G-5449 Y [1] MOTOR GP-HYDRAULIC  
41. 6V-8188 [3] NUT (1/2-13-THD)  
   
    AVAILABLE REPAIR KIT(S):
  111-5771 J [1] KIT-BEARING (AUGER CONVEYOR)  
    (INCLUDES SEALS, NUTS, SPACERS & BEARINGS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920299
 

1G-6817: COUPLING GP-TORQUE

1G-6817 COUPLING GP-TORQUE
S/N 7PJ1-UP
PART OF 1G-6043 POWER TRAIN AR
i00351234 KEBP0092
1G6817 COUPLING GP-TORQUE Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-0420 [1] SPACER  
2. 8C-0384 [1] BEARING-ROLLER  
3. 2L-0043 [1] RING-RETAINING  
4. 8C-1260 [1] SHAFT  
5. 8C-0882 [1] FITTING-PRESSURE RELIEF  
6. 8T-8917 [4] BOLT (1/2-13X1.25-IN)  
7. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 8C-0340 [1] SEAL  
9. 1S-3743 [1] BALL BEARING  
10. 8C-0731 [1] SPACER  
11. 8C-6362 [4] BOLT (5/8-11X2.75-IN)  
12. 8T-4122 [6] WASHER-HARD (17X32X3.5-MM THK)  
13. 082-3002 [2] PLATE  
14. 1G-7074 [1] SUPPORT AS  
15. 1G-7071 [1] SHEAVE  
16. 8C-0841 [1] CAP-RETAINER  
17. 6F-7024 [6] BOLT (5/8-18X5-IN)  
18. 1G-7072 [1] SHAFT  
19. 7X-0515 [4] WASHER-HARD (17X35X5-MM THK)  
20. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
21. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
22. 1G-7073 [1] COUPLING GP  
23. 115-8063 [8] BOLT-SOCKET HEAD  
24. 7X-3483 B [4] SHIM (0.0299-IN THK)  
25. 121-6533 B [4] SHIM (0.01-IN THK)  
26. 121-6535 B [4] SHIM (0.02-IN THK)  
  B   USE AS REQUIRED
 

Information:

Caterpillar Parts SIS Catalog PR-450C :

CLUTCH GP-POWER TAKE-OFF
1G-6818 CLUTCH GP-POWER TAKE-OFF
BIT AS-CUTTER
292-5103 BIT AS-CUTTER
BELT TIGHTENER GP
7W-7308 BELT TIGHTENER GP
102-9290 BELT AR-CONVEYOR
VALVE GP-SOLENOID
122-4520 VALVE GP-SOLENOID
VALVE GP-SENSOR
7R-7349 VALVE GP-SENSOR
VALVE GP-SENSOR
7R-4634 VALVE GP-SENSOR
VALVE GP-CONTROL
5E-4755 VALVE GP-CONTROL
CONTROL GP-BACKUP
101-4898 CONTROL GP-BACKUP
1G-6187 CONVEYOR AR
CONVEYOR AR-FIRST STAGE
082-2714 CONVEYOR AR-FIRST STAGE
CONVEYOR AR-FIRST STAGE
082-2714 CONVEYOR AR-FIRST STAGE
CONVEYOR AR-FIRST STAGE
082-2714 CONVEYOR AR-FIRST STAGE
CONVEYOR AR-FIRST STAGE
117-8529 CONVEYOR AR-FIRST STAGE
CONVEYOR GP-SECOND STAGE
103-1928 CONVEYOR GP-SECOND STAGE
CONVEYOR GP-SECOND STAGE
6R-4008 CONVEYOR GP-SECOND STAGE

Truck sale:

1992 CAT PR-450C
USD $57,500 
1992 CAT PR-450C

Gateway Machinery, LLC
Syracuse, New York
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.