AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1G-6819 REDUCER GP-SPEED S/N 7PJ1-UP PART OF 1G-6043 POWER TRAIN AR PR-450C COLD PLANER


POWER TRAIN
REDUCER GP-FINAL DRIVE
IMPLEMENTS
ROTOR GP
DRIVE GP-ROTOR

COLD PLANER PR-450C COLD PLANER 7PJ
 PR-450C Cold Planer 7PJ00001-UP (MACHINE) POWERED BY 3408 Engine KEBP0092 PR-450C 7PJ   (1992)

POWER TRAIN

REDUCER GP-FINAL DRIVE
REDUCER GP-SPEED
1G-6819 REDUCER GP-SPEED
REDUCER GP-SPEED
7R-9850 REDUCER GP-SPEED
REDUCER GP-SPEED
7R-9851 REDUCER GP-SPEED
 

#KEBP00920320
 

1G-6819: REDUCER GP-SPEED

1G-6819 REDUCER GP-SPEED
S/N 7PJ1-UP
PART OF 1G-6043 POWER TRAIN AR
i00351236 KEBP0092
1G6819 REDUCER GP-SPEED Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7R-9850 Y [1] REDUCER GP-SPEED  
2. 1G-6352 [1] SHEAVE  
3. 081-9257 [1] BUSHING-TERMINAL  
4. 081-7520 [1] BAR  
5. 8T-9389 [3] BOLT (1/2-13X2.75-IN)  
6. 8T-5485 [1] V-BELT SET  
7. 086-9728 [1] COVER  
8. 5S-7379 [8] BOLT (3/8-16X0.875-IN)  
9. 8T-4896 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 8T-5361 [6] WASHER-HARD (28X49X5-MM THK)  
11. 6V-8190 [1] NUT (1-8-THD)  
12. 082-0390 [1] BOLT  
13. 8T-4122 [8] WASHER-HARD (17X32X3.5-MM THK)  
14. 7X-0345 [8] BOLT (5/8-11X1.75-IN)  
15. 086-8889 [1] MOUNT AS  
16. 082-2926 [1] PAD-MOUNTING  
17. 8T-4994 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
18. 7X-0365 [4] BOLT (3/4-10X1.5-IN)  
19. 8T-4223 [13] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-8919 [4] BOLT (1/2-13X1.75-IN)  
21. 1D-5119 [4] NUT (3/4-10-THD)  
22. 6V-8801 [2] NUT (3/8-16-THD)  
23. 8T-8917 [6] BOLT (1/2-13X1.25-IN)  
24. 7R-8276 Y [1] PUMP GP-GEAR  
25. 1G-7236 [1] PLATE  
26. 8T-5518 Y [1] PUMP GP-PISTON  
27. 1G-8057 Y [1] PUMP GP-PISTON  
28. 4B-3605 [4] SETSCREW-SQUARE HEAD (3/4-10X3-IN)  
29. 9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
30. 2M-9780 [1] SEAL-O-RING  
31. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920321
 

7R-9850: REDUCER GP-SPEED

7R-9850 REDUCER GP-SPEED
S/N 7PJ1-UP
PART OF 1G-6819 REDUCER GP-SPEED
i00419883 KEBP0092
7R9850 REDUCER GP-SPEED Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7R-9851 Y [1] REDUCER GP-SPEED (SPEED)  
2. 7R-9722 [4] SPACER  
3. 7X-0346 [4] BOLT (5/8-11X2-IN)  
4. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920322
 

7R-9851: REDUCER GP-SPEED

7R-9851 REDUCER GP-SPEED
S/N 7PJ1-UP
PART OF 7R-9850 REDUCER GP-SPEED
i00419891 KEBP0092
7R9851 REDUCER GP-SPEED Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-6814 [12] BOLT  
2. 2D-5658 [10] BALL BEARING  
3. 081-7090 [3] GEAR  
4. 002-6453 [1] ELBOW  
5. 8B-1931 [1] BUSHING-REDUCER  
6. 5F-5434 [1] VALVE AS-VENT  
7. 082-3073 [1] TUBE  
8. 082-3074 [1] GAUGE-OIL LEVEL (DIPSTICK)  
9. 8C-2323 [1] GEAR  
10. 7X-6783 [1] ADAPTER  
11. 7R-9722 [4] SPACER  
12. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
13. 7X-0340 [4] BOLT (1/2-13X6.5-IN)  
14. 8F-8733 [1] SEAL-O-RING  
15. 081-9354 [1] SHAFT  
16. 8C-7032 [1] SEAL  
17. 5J-3964 [2] RING-LOCK  
18. 081-9353 [1] ADAPTER  
19. 1C-3881 [1] RING  
20. 8T-6763 [4] PLUG-PIPE (1/4-18-THD)  
21. 7X-5867 [1] PLUG  
22. 2B-0858 [1] PLUG-PIPE  
23. 077-6146 [1] COUPLING  
24. 1H-6227 [1] SEAL-O-RING  
25. 8C-7746 [1] ADAPTER  
26. 1G-8218 [1] COUPLING-SPLINE  
27. 5P-2931 [1] SEAL-O-RING  
28. 7R-6682 [1] ADAPTER  
29. 077-6606 [1] COUPLING  
30. 5F-3144 [1] SEAL-O-RING  
31. 098-3088 [1] ADAPTER-PUMP  
 

#KEBP00920323
 

1G-6905: ROTOR AR

1G-6905 ROTOR AR
S/N 7PJ1-UP
AN ATTACHMENT
i00351280 KEBP0092
1G6905 ROTOR AR Parts scheme 1G6905 ROTOR AR Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-5361 [31] WASHER-HARD (28X49X5-MM THK)  
2. 6V-8190 [10] NUT (1-8-THD)  
  1D-6306 [10] NUT (1-8-THD)  
3. 8C-8843 [10] BOLT (1-8X4.5-IN)  
4. 082-2959 [1] FLASHING  
5. 082-2960 [1] STRIP  
6. 3E-9577 C [2] PLATE-CUTTER  
7. 4L-6454 C [11] BOLT (3/8-16X1-IN)  
8. 8T-4896 C [40] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 7E-4243 [5] WASHER-TAPERED  
10. 4L-9337 C [8] BOLT (3/8-16X1.5-IN)  
11. 7X-3462 [4] CHAIN  
12. 1C-3731 [1] PLATE-SLIDE  
13. 8T-3908 [1] SKID-SLIDE PLATE  
14. 1G-6907 Y [1] ROTOR GP  
15. 7X-0404 [11] BOLT (1-8X2.5-IN)  
16. 061-6665 [5] BOLT (1/2-13X1.25-IN)  
17. 7X-3529 [2] FLASHING  
18. 3B-8485 [1] ELBOW  
19. 8T-6292 [1] BEARING  
20. 081-7439 [4] STRIP  
21. 081-6933 [8] BOLT  
22. 6V-8801 [11] NUT (3/8-16-THD)  
23. 081-7438 [1] ANGLE  
24. 8T-9400 [6] BOLT (7/8-9X2.5-IN)  
25. 8C-6913 [6] WASHER-HARD (24X41.5X4-MM THK)  
26. 8C-0400 [4] PIN  
27. 8C-9483 [2] CYLINDER-HYDRAULIC  
28. 8C-1736 [1] PLATE-END  
29. 082-2958 [1] BLADE-MOLDBOARD  
30. 3F-5108 [7] BOLT-PLOW (5/8-11X2.25-IN)  
  8T-4122 [7] WASHER-HARD (17X32X3.5-MM THK)  
  7X-0448 [7] NUT (5/8-11-THD)  
31. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  4M-0061 [4] BOLT (5/16-18X0.75-IN)  
  8C-1740 [4] RETAINER  
32. 081-6962 [2] FILM-WARNING (INSUFFICENT CLEARANCE)  
33. 8C-0996 [1] FLASHING  
34. 9B-7237 [10] BOLT (3/8-16X1.25-IN)  
35. 7X-3530 [2] STRIP  
36. 7X-3531 [2] FLASHING-CUTTER HSG  
37. 082-2740 Y [1] HOUSING GP-ROTOR  
38. 5P-1075 C [5] WASHER-HARD (10.2X22.5X3-MM THK)  
39. 103-6672 C [1] BAR  
40. 5M-3062 C [3] BOLT (3/8-16X0.75-IN)  
  1G-5866 FY [1] LINES GP-LIFT CYLINDER  
  087-0039 FY [1] SPRAY GP-WATER  
  087-0040 FY [1] SPRAY GP-WATER  
  101-4898 CFY [1] CONTROL GP-BACKUP  
41. 1G-6906 Y [1] DRIVE GP-ROTOR  
42. 2N-1287 [1] ELBOW-FLARED  
43. 081-7977 I [1] HOSE AS  
44. 086-8852 [1] PLATE AS  
45. 5P-6941 [1] CONNECTOR  
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
46. 082-0378 [1] COVER  
47. 4L-6454 [4] BOLT (3/8-16X1-IN)  
48. 082-2915 [1] GASKET  
49. 3B-6487 [1] COUPLING (PIPE)  
50. 9N-9987 [2] FITTING  
51. 8B-4884 [1] ELBOW  
52. 1C-3731 [1] PLATE-SLIDE  
53. 061-6665 [5] BOLT (1/2-13X1.25-IN)  
54. 082-2916 [3] COVER  
55. 8T-3908 [1] SKID-SLIDE PLATE  
56. 7X-0408 [11] BOLT (1-8X3.5-IN)  
  8T-5361 [11] WASHER-HARD (28X49X5-MM THK)  
57. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
58. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
59. 5B-3254 C [1] NUT-JAM (7/16-20-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920324
 

1G-7517: ROTOR AR

1G-7517 ROTOR AR
S/N 7PJ1-UP
1270 MM
AN ATTACHMENT
i00351394 KEBP0092
1G7517 ROTOR AR Parts scheme 1G7517 ROTOR AR Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-5361 [41] WASHER-HARD (28X49X5-MM THK)  
2. 6V-8190 [10] NUT (1-8-THD)  
  1D-6306 [10] NUT (1-8-THD)  
3. 8C-8843 [10] BOLT (1-8X4.5-IN)  
4. 6R-3035 [1] FLASHING  
5. 6R-3036 [1] RETAINER  
6. 3E-9577 C [2] PLATE-CUTTER  
7. 4L-6454 [12] BOLT (3/8-16X1-IN)  
8. 8T-4896 C [38] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 7E-4243 [5] WASHER-TAPERED  
10. 4L-9337 C [8] BOLT (3/8-16X1.5-IN)  
11. 7X-3462 [4] CHAIN  
12. 1C-3731 [1] PLATE-SLIDE  
13. 8T-3908 [1] SKID-SLIDE PLATE  
14. 1G-7518 Y [1] ROTOR GP  
15. 7X-0404 [19] BOLT (1-8X2.5-IN)  
16. 061-6665 [5] BOLT (1/2-13X1.25-IN)  
17. 7X-3529 [2] FLASHING  
18. 3B-8485 [1] ELBOW  
19. 8T-6292 [1] BEARING  
20. 081-7439 [4] STRIP  
21. 081-6933 [8] BOLT  
22. 6V-8801 [11] NUT (3/8-16-THD)  
23. 081-7438 [1] ANGLE  
24. 8T-9400 [6] BOLT (7/8-9X2.5-IN)  
25. 8C-6913 [6] WASHER-HARD (24X41.5X4-MM THK)  
26. 8C-0400 [4] PIN  
27. 8C-9483 [2] CYLINDER-HYDRAULIC  
28. 6R-3305 [1] PLATE AS  
29. 6R-3034 [1] BLADE-MOLDBOARD  
30. 3F-5108 [5] BOLT-PLOW (5/8-11X2.25-IN)  
  8T-4122 [5] WASHER-HARD (17X32X3.5-MM THK)  
  7X-0448 [5] NUT (5/8-11-THD)  
31. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  4M-0061 [4] BOLT (5/16-18X0.75-IN)  
  8C-1740 [4] RETAINER  
32. 081-6962 [2] FILM-WARNING (INSUFFICENT CLEARANCE)  
33. 8C-0996 [1] FLASHING  
34. 9B-7237 C [10] BOLT (3/8-16X1.25-IN)  
35. 7X-3530 [2] STRIP (HOLDDOWN)  
36. 7X-3531 [2] FLASHING-CUTTER HSG  
37. 6R-3277 Y [1] HOUSING GP-OUTPUT  
38. 6R-3278 [1] MOUNT  
39. 5P-1075 C [5] WASHER-HARD (10.2X22.5X3-MM THK)  
40. 103-6672 C [1] BAR  
  7X-3517 F [1] PIN  
41. 1G-6906 Y [1] DRIVE GP-ROTOR  
42. 2N-1287 [1] ELBOW-FLARED  
43. 081-7977 I [1] HOSE AS  
44. 086-8852 [1] PLATE AS  
45. 5P-6941 [1] CONNECTOR  
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
  5B-3254 C [1] NUT-JAM (7/16-20-THD)  
46. 082-0378 [1] COVER  
47. 4L-6454 [4] BOLT (3/8-16X1-IN)  
48. 082-2915 [1] GASKET  
49. 3B-6487 [1] COUPLING (PIPE)  
50. 9N-9987 [2] FITTING  
51. 8B-4884 [1] ELBOW  
52. 1C-3731 [1] PLATE-SLIDE  
53. 061-6665 [5] BOLT (1/2-13X1.25-IN)  
54. 082-2916 [1] COVER  
55. 8T-3908 [1] SKID-SLIDE PLATE  
56. 7X-0408 [11] BOLT (1-8X3.5-IN)  
  8T-5361 [11] WASHER-HARD (28X49X5-MM THK)  
57. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
58. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
  1G-7519 FY [1] SPRAY GP-WATER  
  087-0040 FY [1] SPRAY GP-WATER  
  101-4898 CFY [1] CONTROL GP-BACKUP  
  1G-5866 FY [1] LINES GP-LIFT CYLINDER  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920325
 

1G-7525: ROTOR AR

1G-7525 ROTOR AR
S/N 7PJ1-UP
2 210MM
AN ATTACHMENT
i00351399 KEBP0092
1G7525 ROTOR AR Parts scheme 1G7525 ROTOR AR Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-5361 [31] WASHER-HARD (28X49X5-MM THK)  
2. 6V-8190 [10] NUT (1-8-THD)  
  1D-6306 [10] NUT (1-8-THD)  
3. 8C-8843 [10] BOLT (1-8X4.5-IN)  
4. 082-2919 [1] FLASHING  
5. 082-2920 [1] STRIP  
6. 3E-9577 C [2] PLATE-CUTTER  
7. 4L-6454 C [15] BOLT (3/8-16X1-IN)  
8. 8T-4896 [40] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 7E-4243 [5] WASHER-TAPERED  
10. 4L-9337 C [8] BOLT (3/8-16X1.5-IN)  
11. 7X-3462 [4] CHAIN  
12. 1C-3731 [1] PLATE-SLIDE  
13. 8T-3908 [1] SKID-SLIDE PLATE  
14. 1G-7526 Y [1] ROTOR GP  
15. 7X-0404 [11] BOLT (1-8X2.5-IN)  
16. 061-6665 [5] BOLT (1/2-13X1.25-IN)  
17. 7X-3529 [2] FLASHING  
18. 3B-8485 [1] ELBOW  
19. 8T-6292 [1] BEARING  
20. 081-7439 [4] STRIP  
21. 081-6933 [8] BOLT  
22. 6V-8801 [11] NUT (3/8-16-THD)  
23. 081-7438 [1] ANGLE  
24. 8T-9400 [6] BOLT (7/8-9X2.5-IN)  
25. 8C-6913 [6] WASHER-HARD (24X41.5X4-MM THK)  
26. 8C-0400 [4] PIN  
27. 8C-9483 [2] CYLINDER-HYDRAULIC  
28. 8C-1736 [1] PLATE-END  
29. 9N-7257 [1] BLADE-MOLDBOARD  
30. 3F-5108 C [8] BOLT-PLOW (5/8-11X2.25-IN)  
  8T-4122 C [8] WASHER-HARD (17X32X3.5-MM THK)  
  7X-0448 C [8] NUT (5/8-11-THD)  
31. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  4M-0061 [4] BOLT (5/16-18X0.75-IN)  
  8C-1740 [4] RETAINER  
32. 081-6962 [2] FILM-WARNING (INSUFFICENT CLEARANCE)  
33. 8C-0996 [1] FLASHING  
34. 9B-7237 C [10] BOLT (3/8-16X1.25-IN)  
35. 7X-3530 [2] STRIP  
36. 7X-3531 [2] FLASHING-CUTTER HSG  
37. 082-2738 Y [1] HOUSING GP-ROTOR  
38. 5P-1075 C [5] WASHER-HARD (10.2X22.5X3-MM THK)  
39. 103-6672 C [1] BAR  
  1G-5866 FY [1] LINES GP-LIFT CYLINDER  
  1G-7527 FY [1] SPRAY GP-WATER  
  101-4898 FY [1] CONTROL GP-BACKUP  
  087-0040 FY [1] SPRAY GP-WATER  
  082-2939 F [1] PIN  
40. 1G-6906 Y [1] DRIVE GP-ROTOR  
41. 2N-1287 [1] ELBOW-FLARED  
42. 081-7977 I [1] HOSE AS  
43. 086-8852 [1] PLATE AS  
44. 5P-6941 [1] CONNECTOR  
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
  5B-3254 C [1] NUT-JAM (7/16-20-THD)  
45. 082-0378 [1] COVER  
46. 4L-6454 [4] BOLT (3/8-16X1-IN)  
47. 082-2915 [1] GASKET  
48. 3B-6487 [1] COUPLING (PIPE)  
49. 9N-9987 [2] FITTING  
50. 8B-4884 [1] ELBOW  
51. 1C-3731 [1] PLATE-SLIDE  
52. 061-6665 [5] BOLT (1/2-13X1.25-IN)  
53. 082-2916 [1] COVER  
54. 8T-3908 [1] SKID-SLIDE PLATE  
55. 7X-0408 [11] BOLT (1-8X3.5-IN)  
  8T-5361 [11] WASHER-HARD (28X49X5-MM THK)  
56. 8T-4896 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
57. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920326
 

1G-6907: ROTOR GP

1G-6907 ROTOR GP
S/N 7PJ1-UP
PART OF 1G-6905 ROTOR AR
AN ATTACHMENT
i00351283 KEBP0092
1G6907 ROTOR GP Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7R-6209 [1] SHAFT AS  
2. 8C-2887 [1] PLATE  
3. 1G-6298 [1] ROTOR AS  
4. 082-1054 Y [1] DRIVE GP-ROTOR  
5. 8T-4994 [40] WASHER-HARD (20X36.5X3.5-MM THK)  
6. 3K-0453 [12] NUT (3/4-16-THD)  
7. 8E-9087 [156] BIT AS-CUTTING  
8. 5J-1086 [1] SEAL-O-RING  
9. 8T-9399 [40] BOLT (3/4-10X2.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920327
 

1G-7518: ROTOR GP

1G-7518 ROTOR GP
S/N 7PJ1-UP
PART OF 1G-7517 ROTOR AR
AN ATTACHMENT
i00351395 KEBP0092
1G7518 ROTOR GP Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7R-6209 [1] SHAFT AS  
2. 8C-2887 [1] PLATE  
3. 6R-3033 Y [1] ROTOR GP  
4. 082-1054 Y [1] DRIVE GP-ROTOR  
5. 1B-5174 [2] PLUG-PIPE  
6. 3K-0453 [12] NUT (3/4-16-THD)  
7. 8E-9087 [104] BIT AS-CUTTING  
8. 5J-1086 [1] SEAL-O-RING  
9. 8T-9399 [40] BOLT (3/4-10X2.25-IN)  
10. 8T-4994 [40] WASHER-HARD (20X36.5X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920328
 

1G-7526: ROTOR GP

1G-7526 ROTOR GP
S/N 7PJ1-UP
PART OF 1G-7525 ROTOR AR
AN ATTACHMENT
i00351401 KEBP0092
1G7526 ROTOR GP Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7R-6209 [1] SHAFT AS  
2. 8C-2887 [1] PLATE  
3. 1G-6299 [1] ROTOR AS  
4. 082-1054 Y [1] DRIVE GP-ROTOR  
5. 8T-4994 [40] WASHER-HARD (20X36.5X3.5-MM THK)  
6. 3K-0453 [12] NUT (3/4-16-THD)  
7. 8E-9087 [168] BIT AS-CUTTING  
8. 5J-1086 [1] SEAL-O-RING  
9. 8T-9399 [40] BOLT (3/4-10X2.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00920329
 

6R-3033: ROTOR GP

6R-3033 ROTOR GP
S/N 7PJ1-UP
PART OF 1G-7518 ROTOR GP
AN ATTACHMENT
i00396021 KEBP0092
6R3033 ROTOR GP Parts scheme
  For full view, you need register

Parts for your PR-450C COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-8568 [104] BLOCK-BIT HOLDER  
2. 8T-4084 [104] BLOCK-MOUNTING  
3. 7R-7670 [6] BAR  
4. 7X-3469 [12] PLATE  
5. 7X-3470 [25] PLATE  
6. 006-9151 [12] STUD  
 

Information:

Caterpillar Parts SIS Catalog PR-450C :

101-9202 LINES GP-MOTOR
LINES GP-CONVEYOR MOTOR
1G-5448 LINES GP-CONVEYOR MOTOR
KIT-CUTTER BIT
376-2346 KIT-CUTTER BIT
KIT-CUTTER BIT
351-2678 KIT-CUTTER BIT
KIT-CUTTER BIT
350-7199 KIT-CUTTER BIT
KIT-CUTTER BIT
349-4947 KIT-CUTTER BIT
KIT-CUTTER BIT
349-4946 KIT-CUTTER BIT
KIT-CUTTER BIT
316-2327 KIT-CUTTER BIT
REDUCER GP-SPEED
7R-9850 REDUCER GP-SPEED
REDUCER GP-SPEED
7R-9851 REDUCER GP-SPEED
ROTOR AR
1G-6905 ROTOR AR
ROTOR AR
1G-7517 ROTOR AR
ROTOR AR
1G-7525 ROTOR AR
ROTOR GP
1G-6907 ROTOR GP
ROTOR GP
1G-7518 ROTOR GP
ROTOR GP
1G-7526 ROTOR GP

Truck sale:

1992 CAT PR-450C
USD $57,500 
1992 CAT PR-450C

Gateway Machinery, LLC
Syracuse, New York
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.