AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C1500 PUMP GP-FUEL INJECTION TYPE 2. S/N 97Z1-UP 1278207-PAGE 69.02 CB-434 VIBRATORY COMPACTOR


FUEL SYSTEM
PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
FILTER GP-FUEL
LINES GP-FUEL
OPERATOR STATION
FEET PER MINUTE GP
ELECTRICAL AND STARTING SYSTEM
SOLENOID GP-SHUTOFF
STARTING MOTOR GP
ALTERNATOR GP-CHARGING

VIBRATORY COMPACTOR CB-434 VIBRATORY COMPACTOR 3TF
 CB-434 VIBRATORY COMPACTOR 3TF00218-UP (MACHINE) POWERED BY 3114T ENGINE KEBP0095 CB-434 3TF   (1989)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
127-8207 INJECTOR GP-FUEL
 

#KEBP00950100
 

7C-1500: PUMP GP-FUEL INJECTION

7C1500 PUMP GP-FUEL INJECTION
TYPE 2. S/N 97Z1-UP
1278207-PAGE 69.02
c684925 KEBP0095
7C1500 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your CB-434 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8442 M [1] BOLT-SOCKET HEAD (M6X1X30)  
2. 127-8207 YR [1] INJECTOR GP-FUEL  
3. 114-8718 [1] SEAL-O-RING (26.64MM ID)  
4. 125-8274 [1] SEAL-O-RING (7.59MM'ID)  
5. 9X-8267 [1] WASHER  
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00950101
 

127-8207: INJECTOR GP-FUEL

1278207 INJECTOR GP-FUEL*R
PART OF 7C1500 PUMP-FUEL INJECTION
c685039 KEBP0095
1278207 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your CB-434 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PUMP GP-FUEL  
2. 114-8718 [1] SEAL-O-RING (26.64MM ID)  
3. 125-8274 [1] SEAL-O-RING (7.59MM'ID)  
 

#KEBP00950102
 

1N-3476: FILTER GP-FUEL

1N3476 FILTER GP-FUEL
c549249 KEBP0095
1N3476 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your CB-434 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 B [4] WASHER-HARD (2MM THK)  
2. 6V-9607 MB [2] BOLT (M8X1.25X120MM)  
3. 3J-1907 [1] SEAL-O-RING (15.85MM OD)  
4. 7C-1159 [1] GASKET  
5. 6V-5218 M [2] BOLT (M8X1.25X35MM)  
6. 1R-0750 [1] FILTER AS-FUEL  
7. 9S-4191 [1] PLUG-O-RING (9/16-18 THD)  
8. 4W-5158 [1] BASE AS  
9. 4N-3294 [1] INSERT-FUEL FILTER  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP00950103
 

7W-9854: LINES GP-FUEL FILTER

7W9854 LINES GP-FUEL FILTER
c587220 KEBP0095
7W9854 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your CB-434 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7934 [2] WASHER-HARD  
2. 6V-6317 M [2] BOLT (M10X1.50X20MM)  
3. 6V-8724 [2] ELBOW (90 DEGREE-9/16-18 THD)  
4. 3J-1907 C [5] SEAL-O-RING (15.85MM OD)  
    (11.89MM ID)
5. 9S-4191 [1] PLUG-O-RING (9/16-18 THD)  
6. 6V-8397 [4] SEAL-O-RING (12.83MM OD)  
    (9.25MM ID)
7. 115-4232 [1] TUBE AS  
8. 7W-7693 [1] TUBE AS  
9. 3N-3252 [1] SPRING  
10. 5P-7813 [1] SEAL-O-RING  
11. 8T-0151 [1] ADAPTER  
12. 7E-5189 [1] VALVE-REGULATOR  
13. 7E-5190 [1] TUBE AS  
14. 5F-7054 [1] SEAL-O-RING (18.6MM ID)  
15. 8T-7547 MC [2] BOLT (M8X1.25X30MM)  
16. 7X-2459 [1] TEE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP00950104
 

7R-9042: OPTION GP-FPM

7R9042 OPTION GP-FPM
AN ATTACHMENT
c591741 KEBP0095
7R9042 OPTION GP-FPM Parts scheme
  For full view, you need register

Parts for your CB-434 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7R-6076 [1] SENSOR (MAG RPM)  
2. 081-4414 [1] HARNESS  
3. 112-5127 [1] SPEEDOMETER (FPM)  
 

#KEBP00950105
 

7C-9458: SOLENOID GP-SHUTOFF

7C9458 SOLENOID GP-SHUT-OFF
24 VOLT
c663270 KEBP0095
7C9458 SOLENOID GP-SHUTOFF Parts scheme
  For full view, you need register

Parts for your CB-434 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4K-1388 [1] SEAL-O-RING (26.59MM ID)  
2. 125-5772 [1] SOLENOID AS  
3. 6V-8377 [2] NUT (8-32 THD)  
4. 9B-7233 [2] LOCKWASHER (NO.8)  
 

#KEBP00950106
 

7C-4028: SOLENOID GP-SHUTOFF

7C4028 SOLENOID GP-SHUT-OFF
24 VOLT
c531440 KEBP0095
7C4028 SOLENOID GP-SHUTOFF Parts scheme
  For full view, you need register

Parts for your CB-434 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-3663 C [1] SOLENOID AS-MAGNETIC  
  6V-8377 [2] NUT (8-32 THD)  
  9B-7233 [2] LOCKWASHER  
  6V-8378 [1] NUT (10-32 THD)  
  4B-4274 [1] WASHER  
2. 4K-1388 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP00950107
 

7C-5731: STARTING MOTOR GP-ELECTRIC

7C5731 STARTING MOTOR GP-ELECTRIC
3E5381-PAGE 75
c520177 KEBP0095
7C5731 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your CB-434 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5381 Y [1] STARTING MOTOR GP-ELECTRIC  
2. 8T-4196 M [3] BOLT  
  8T-4121 [3] WASHER  
3. 8R-6892 [1] WIRE AS  
4. 3K-3257 [1] GASKET  
5. 9Y-8241 [1] WIRE AS  
6. 8T-4200 M [1] BOLT  
  8T-4224 [1] WASHER-HARD  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP00950108
 

3E-5381: STARTING MOTOR GP-ELECTRIC

3E5381 STARTING MOTOR GP-ELECTRIC
24 VOLT
PART OF 7C5731 STARTING MOTOR-ELECTRIC
c588397 KEBP0095
3E5381 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your CB-434 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-1279 [1] CASE AS-STARTER  
2. 9X-1276 [1] FRAME-STARTER  
3. 9X-1278 [1] BOOT  
4. 9X-2036 M [1] SCREW-PAN HEAD  
5. 8F-1434 [1] LOCKWASHER  
6. 8T-4244 M [2] NUT  
7. 8T-4133 M [1] NUT  
  8T-4121 [1] WASHER  
8. 7X-0562 [2] WASHER-HARD  
9. 9X-7846 [1] PLUNGER AS  
10. 9X-1277 [1] COVER  
11. 3E-6498 [1] SWITCH AS (STARTER)  
12. 8J-4455 [1] BALL  
13. 7T-6090 [1] SPRING  
14. 9X-1272 [1] DRIVE AS-STARTER  
15. 9X-1273 [1] HOUSING-STARTER  
16. 9X-1275 [1] HOLDER AS-BRUSH  
17. 7T-6087 [1] WASHER  
18. 9X-1280 [1] ARMATURE AS  
19. 2P-8104 [1] BEARING  
20. 8L-4070 [1] BALL BEARING  
21. 3E-5154 [1] BUSHING-STARTER  
22. 3E-5153 [1] COVER-STARTER  
    THE FOLLOWING REPAIR
    KITS ARE AVAILABLE:
  9X-0295 [1] KIT-TERMINAL  
    (INCL. NUTS, WASHERS
    BUSHINGS, SEALS,
    PLATES & TERMINALS)
   
  9X-1285 [1] KIT-BRUSH  
    (INCL. BRUSHES &
    SCREWS)
  9X-1284 [1] KIT-STARTER SEAL  
    (INCL. SEALS &
    GASKET)
  9X-1283 [1] KIT-HARDWARE  
    (INCL. BOLTS, SCREWS
    NUT, WASHER &
    LOCKWASHERS)
  9X-1282 [1] KIT-STARTER GEAR  
    (INCL. PINIONS,
    ROLLERS & RETAINERS)
  M   METRIC PART
 

#KEBP00950109
 

9Y-8187: ALTERNATOR GP-CHARGING

9Y8187 ALTERNATOR GP-CHARGING
24 VOLT, 55 AMPERE
9W3043-PAGE 77, 7C3729-PAGE 78
c528892 KEBP0095
9Y8187 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your CB-434 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4908 M [4] BOLT  
2. 7C-5583 [1] SPACER  
3. 9Y-1267 [1] WIRE AS  
4. 7X-2543 M [1] BOLT  
5. 8T-4121 [3] WASHER  
6. 4N-0205 [1] SPACER  
7. 7W-5746 [1] NUT AS  
8. 9Y-1751 [1] STRAP  
9. 8T-4186 M [2] BOLT  
10. 8T-4224 [4] WASHER-HARD  
11. 9W-3043 Y [1] ALTERNATOR GP-CHARGING  
12. 7C-3463 [1] BRACKET-ALTERNATOR  
13. 8T-4222 [1] WASHER-PLATED  
14. 7C-3729 [1] PULLEY-ALTERNATOR  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Unit Injector
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Unit Injector Mechanism
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN MECHANICAL UNIT FUEL INJECTORS
CATERPILLAR REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN MECHANICAL UNIT FUEL INJECTORS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Unit Injector - Test
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Fuel Timing Dimension - Adjust
3114, 3116, and 3126 Engines
Unit Injector - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Unit Injector Synchronization - Adjust
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines
Troubleshooting
Unit Injector Cranking Rack Position
3114, 3116 and 3126 Engines
Unit Injector Misfire
3114, 3116 and 3126 Engines
Unit Injector
3114, 3116 and 3126 Engines
Disassembly and Assembly
Unit Injector - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Procedure To Lessen Governor Control Lever Effort{1265}
1989/11/06
Use Correct Calibration Pin (1U9786) When Calibrating Governor; Do Not Use 1U7305 Insertion Tool{0706,0782,1264}
1989/11/06
New Fuel Return Valve Prevents Siphoning{1253,1274}
1989/12/25
New Seal Used In Governor Fastener Group{1264}
1990/01/29
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Fuel Setting Screw Cover And Bolt {1257}
1990/07/02
Setscrew And Nut Available For Fuel Setting And Injector Synchronization {1257}
1990/10/22
New Stronger Exhaust Valve Push Rod Used In Valve Mechanism Groups{1208}
1990/11/05
Larger O-ring Seal Available For Oil Supply Port In Governor Housing{1264}
1991/05/13
Fuel Injector Group Rack Movement{1290}
1992/05/18
4P6493 Governor Information Plate Available{7557}
1992/06/15
Governor Specifications Are Available Through The Technical Information System{1264,0374}
1992/09/07
Replacement Governors For Early Engines{1264}
1992/11/09
Unit Injector Tip Seal Deterioration {1290}
1993/01/25
Measuring "Dynamic Rack" Of Unit Injectors{0780}
1993/06/21
New Fuel Injector Control Linkage{1298}
1993/08/30
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
New "High Efficiency" Fuel Filters Help Prevent Worn Injectors{1261}
1995/07/31
New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06
Mechanical Unit Injector Identification Code{1290}
1995/12/18
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/05
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01
Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Pull the Injector Sleeve with a 139-0692 Sleeve Jaw {0706, 1713}
2000/04/17
Troubleshooting Engines with Mechanical Unit Injection (MUI) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/05/19
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Do not Use the 1U-6661 Pop Tester Gp or the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog CB-434 :

PUMP GP-FUEL INJECTION
7C-1500 PUMP GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
7W-8600 CONTROL GP-FUEL INJECTION
CONTROL GP-GOVERNOR
7E-9429 CONTROL GP-GOVERNOR
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
FASTENER GP-GOVERNOR
7W-4812 FASTENER GP-GOVERNOR
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
GOVERNOR GP-UNIT INJECTOR
131-4852 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6179 GOVERNOR GP-UNIT INJECTOR
INJECTOR GP-FUEL
127-8207 INJECTOR GP-FUEL
FILTER GP-FUEL
1N-3476 FILTER GP-FUEL
LINES GP-FUEL FILTER
7W-9854 LINES GP-FUEL FILTER
OPTION GP-FPM
7R-9042 OPTION GP-FPM
SOLENOID GP-SHUTOFF
7C-9458 SOLENOID GP-SHUTOFF
SOLENOID GP-SHUTOFF
7C-4028 SOLENOID GP-SHUTOFF
STARTING MOTOR GP-ELECTRIC
7C-5731 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
3E-5381 STARTING MOTOR GP-ELECTRIC

Truck sale:

 
 
CAT CB-434

Witcher Auctions
Arkansas
CAT CB-434
USD $16,500 
CAT CB-434

Witcher Auctions
Arkansas
 
 
CAT CB-434

Jeff Martin Auctioneers
Stanton, Texas
1996 CAT CB-434
Call 
1996 CAT CB-434

TALLERES KP-LAN IMPORT-EXPORT S.L
Uxes (Arteixo), A CORUÑA, Spain
CATERPILLAR CB434 1994
$15,500 USD 
CATERPILLAR CB434 1994
- COMPACTORS
ZIEGLER INC
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.