AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7E7661 GOVERNOR GP-UNIT INJECTOR CS-533 VIBRATORY COMPACTOR


FUEL SYSTEM
GOVERNOR GP

VIBRATORY COMPACTOR CS-533 VIBRATORY COMPACTOR 3BL
 CS-533 CP-533 VIBRATORY COMPACTOR 3BL00001-UP (MACHINE) POWERED BY 3116 ENGINE KEBP0099 CS-533 3BL   (1992)

FUEL SYSTEM

GOVERNOR GP
7E-7661 GOVERNOR GP-UNIT INJECTOR
FASTENER GP-GOVERNOR
7W-4812 FASTENER GP-GOVERNOR
GOVERNOR GP-UNIT INJECTOR
4P-5512 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5512 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5512 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5503 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6179 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6179 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-4852 GOVERNOR GP-UNIT INJECTOR
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
 

#KEBP00990090
 

7E-7661: GOVERNOR GP-UNIT INJECTOR

7E7661 GOVERNOR GP-UNIT INJECTOR
KEBP00990090 KEBP0099
  For full view, you need register

Parts for your CS-533 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  7W-4812 Y [1] FASTENER GP-GOVERNOR  
   
  4P-5512 Y [1] GOVERNOR GP-UNIT INJECTOR  
   
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00990091
 

7W-4812: FASTENER GP-GOVERNOR

7W4812 FASTENER GP-GOVERNOR
PART OF 7E7661 GOVERNOR-UNIT INJECTOR
c476378 KEBP0099
7W4812 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your CS-533 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 JC [1] SLEEVE  
2. 9M-1974 [3] WASHER  
3. 6V-5218 M [3] BOLT  
4. 9Y-5295 C [1] TUBE-GOVERNOR CONNECTION  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING  
   
    J-INSTALL SLEEVE
    IN FRONT HOUSING
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP00990092
 

4P-5512: GOVERNOR GP-UNIT INJECTOR

4P5512 GOVERNOR GP-UNIT INJECTOR
TYPE 1
4P5503-PAGE 58
PART OF 7E7661 GOVERNOR-UNIT INJECTOR
c524463 KEBP0099
4P5512 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-533 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1574 [1] CAM-TORQUE  
3. 4P-2467 [1] SPRING GP  
  [1] SPRING-LOW IDLE  
  [1] SPRING-HIGH IDLE  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 7C-5989 [1] PLATE-GOVERNOR INFORMATION  
  Y   SEPARATE ILLUSTRATION
 

#KEBP00990093
 

4P-5512: GOVERNOR GP-UNIT INJECTOR

4P5512 GOVERNOR GP-UNIT INJECTOR
TYPE 2
1006179-PAGE 59.01
PART OF 7E7661 GOVERNOR-UNIT INJECTOR
c554628 KEBP0099
4P5512 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-533 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-6179 CY [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1574 [1] CAM-TORQUE  
3. 4P-2467 [1] SPRING GP  
  [1] SPRING-LOW IDLE  
  [1] SPRING-HIGH IDLE  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00990094
 

4P-5512: GOVERNOR GP-UNIT INJECTOR

4P5512 GOVERNOR GP-UNIT INJECTOR
TYPE 3. S/N 98Z1-UP
1314852-PAGE 59.05
PART OF 7E7661 GOVERNOR-UNIT INJECTOR
c653744 KEBP0099
4P5512 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-533 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-4852 CY [1] GOVERNOR GP-UNIT INJECTOR  
2. 4P-1574 [1] CAM-TORQUE  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
  [1] SPRING-LOW IDLE  
  [1] SPRING-HIGH IDLE  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP00990095
 

4P-5503: GOVERNOR GP-UNIT INJECTOR

4P5503 GOVERNOR GP-UNIT INJECTOR
7E8794-PAGE PAGE 60
PART OF 4P5512 GOVERNOR-UNIT INJECTOR
c524481 KEBP0099
4P5503 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-533 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-5157 [1] HOUSING AS-GOVERNOR  
2. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
3. 8C-8546 M [9] BOLT-SOCKET HEAD  
4. 7E-3216 [1] BLOCK AS-BEARING  
  6F-5933 [2] BEARING-NEEDLE  
5. 9X-6002 M [1] SETSCREW  
6. 7C-6205 [1] PLUG  
7. 5C-2874 M [3] NUT  
8. 7C-4483 [1] SCREEN AS  
9. 7C-5541 [2] TOE-FLYWEIGHT  
10. 8T-5435 M [1] BOLT  
11. 7C-5885 [1] WASHER  
12. 3T-0849 M [6] BOLT-SOCKET HEAD  
13. 7E-5785 [1] SLEEVE-LIMITING  
14. 8C-6775 M [1] SETSCREW-SOCKET  
15. 4P-5676 [1] CLEVIS  
16. 4P-4000 [1] SPRING-LEVER  
17. 7C-6204 [1] PLUG  
18. 8T-6702 M [1] SETSCREW-SOCKET  
19. 7W-4313 [1] WASHER  
20. 8T-7060 M [1] RING-RETAINING  
21. 4P-4983 [1] SLEEVE  
22. 9Y-1837 [1] SPRING  
23. 4P-4985 [1] VALVE-GOVERNOR SERVO  
24. 4P-5743 [1] LEVER AS-LIMIT  
25. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
26. 5P-9757 [1] SEAL-O-RING  
27. 4H-1641 [1] PIN-SPRING  
28. 7W-7362 [1] PISTON-GOVERNOR SERVO  
29. 8C-3312 [1] RING-RETAINING  
30. 7C-5148 [1] CARRIER-FLYWEIGHT  
31. 2S-7316 [2] DOWEL  
32. 6V-7699 [4] WASHER-HARD  
33. 8C-8545 M [4] BOLT-SOCKET HEAD  
34. 7W-8993 [2] WEIGHT  
35. 4P-8947 [1] RISER  
36. 4P-0737 [1] SHAFT-RISER  
37. 7W-5591 [1] SEAT-GOVERNOR SPRING  
38. 6V-5213 M [3] BOLT-SOCKET HEAD  
39. 7L-3386 [1] SEAL-O-RING  
40. 7C-5884 [1] COVER-OIL SUMP  
41. 4P-4231 [1] COVER-REAR  
42. 6V-5100 [1] SEAL-O-RING  
43. 7C-5883 B [7] SHIM  
44. 7C-3776 [1] PISTON AS  
  4N-6404 [1] RING-RETAINING  
  4N-6407 [1] SPOOL-DASHPOT  
  4P-8694 [1] RING-SPACER  
45. 4P-8948 [1] SEAT AS-SPRING  
46. 7W-1440 [8] SHIM  
47. 7C-2743 [2] RACE  
48. 7W-5561 [1] BEARING-THRUST  
49. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
50. 8C-5061 [1] RING-RETAINING  
51. 7C-5150 [1] PIN  
52. 7C-5480 [1] SPRING-TORSION  
53. 7C-8640 [1] SPRING-CAM  
54. 7W-5594 [1] SHAFT AS-PIVOT  
  8C-5899 [1] PIN-SPRING  
55. 7C-6592 [1] ARBOR AS-TORQUE CAM  
  7W-5137 [1] ARBOR-TORQUE CAM  
56. 7E-3217 [1] LEVER AS  
57. 3P-3547 [1] RING-RETAINING  
58. 7E-3215 [1] LEVER AS  
59. 8T-0269 [3] BOLT-SOCKET HEAD  
60. 7N-2171 [1] RING-RETAINING  
61. 9X-2547 M [2] SCREW-FLAT HEAD  
62. 4P-3539 [1] LEVER-THROTTLE  
63. 4P-3537 [1] RING-TOLERANCE  
64. 7E-0155 [1] SCREEN AS-FUEL INLET  
65. 7C-8854 [1] PIN-CLEVIS  
66. 8T-1460 M [1] RING-RETAINING  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
  M   METRIC PART
 

#KEBP00990096
 

100-6179: GOVERNOR GP-UNIT INJECTOR

1006179 GOVERNOR GP-UNIT INJECTOR
TYPE 1
7E8794-PAGE 60
PART OF 4P5512 GOVERNOR-UNIT INJECTOR
c560877 KEBP0099
1006179 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-533 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 4P-5676 [1] CLEVIS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 4P-4985 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 104-7039 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 7E-3215 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 7C-6592 [1] ARBOR AS-TORQUE CAM  
24. 8C-6775 M [1] SETSCREW-SOCKET  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 7E-0155 [1] SCREEN AS-FUEL INLET  
35. 6V-8189 [1] NUT  
36. 7W-5614 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD  
38. 7W-4313 [1] WASHER  
39. 6I-4514 [1] HOUSING AS  
40. Z [1] SHAFT  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET  
43. 5C-2874 M [2] NUT  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD  
48. 4P-3539 [1] LEVER-THROTTLE  
49. 8T-5435 M [1] BOLT  
50. 101-7676 [1] SETSCREW-HEX HEAD  
51. 7C-4483 [1] SCREEN AS  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. Z [1] PLUG  
55. 4P-3537 [1] RING-TOLERANCE  
56. 8T-0269 M [3] BOLT-SOCKET HEAD  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD  
64. 8C-8545 M [4] BOLT-SOCKET HEAD  
65. 7C-5541 [2] TOE-FLYWEIGHT  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM  
80. 7C-5885 [1] WASHER  
81. 4P-4000 [1] SPRING-LEVER  
82. 7C-6205 [1] PLUG  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#KEBP00990097
 

100-6179: GOVERNOR GP-UNIT INJECTOR

1006179 GOVERNOR GP-UNIT INJECTOR
TYPE 2
7E8794-PAGE 60
PART OF 4P5512 GOVERNOR-UNIT INJECTOR
c630535 KEBP0099
1006179 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-533 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7069 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 C [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 8T-8895 M [1] SETSCREW-SOCKET  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 7C-6205 [1] PLUG  
35. 6V-8189 [1] NUT  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD  
38. 7W-4313 [1] WASHER  
39. 6I-4514 [1] HOUSING AS  
40. Z [1] SHAFT  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET  
43. 5C-2874 M [2] NUT  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD  
48. 4P-3539 [1] LEVER-THROTTLE  
49. 8T-5435 M [1] BOLT  
50. 1N-3887 C [1] SETSCREW-SOCKET  
51. 7C-4483 [1] SCREEN AS  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. Z [1] PLUG  
55. 4P-3537 [1] RING-TOLERANCE  
56. 8T-0269 M [3] BOLT-SOCKET HEAD  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD  
64. 8C-8545 M [4] BOLT-SOCKET HEAD  
65. 7C-5541 [2] TOE-FLYWEIGHT  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM  
80. 7C-5885 [1] WASHER  
81. 4P-4000 [1] SPRING-LEVER  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#KEBP00990098
 

131-4852: GOVERNOR GP-UNIT INJECTOR

1314852 GOVERNOR GP-UNIT INJECTOR
7E8794-PAGE 60
PART OF 4P5512 GOVERNOR-UNIT INJECTOR
c702253 KEBP0099
1314852 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your CS-533 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING (18.77MM ID)  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 8T-8895 M [1] SETSCREW-SOCKET  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. Z [1] PIN  
33. Z [1] LEVER-TORQUE  
34. 7C-6205 [1] PLUG  
35. 6V-8189 [1] NUT (5/16-18 THD)  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (7.59MM'ID)  
38. 7W-4313 [1] WASHER  
39. 6I-4514 [1] HOUSING AS  
40. 2S-4078 [1] SEAL-O-RING (37.46MM ID)  
41. 4P-4000 [1] SPRING-LEVER  
42. 8T-6702 M [1] SETSCREW-SOCKET  
43. 5C-2874 M [2] NUT (M5X.8 THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD  
48. 4P-3539 [1] LEVER-THROTTLE  
49. 8T-5435 M [1] BOLT  
50. 1N-3887 [1] SETSCREW-SOCKET  
51. 7C-4483 [1] SCREEN AS  
52. 6V-5100 [1] SEAL-O-RING (53.64MM ID)  
53. 4P-4231 [1] COVER-REAR  
54. 7C-5885 [1] WASHER  
55. 4P-3537 [1] RING-TOLERANCE  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M16X1X20MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (1.6MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD  
65. 7C-5541 [2] TOE-FLYWEIGHT  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM  
80. 109-4587 [1] RING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#KEBP00990099
 

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

7E8794 DRIVE GP-GOVERNOR & TRANSFER PUMP
PART OF 4P5503, 1006179 & 1314852 GOVERNOR-UNIT INJECTOR
c572096 KEBP0099
7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme
  For full view, you need register

Parts for your CS-533 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-5612 [1] HOUSING AS-FRONT  
  7S-5005 [2] DOWEL  
  7S-6798 [1] SEAL-LIP TYPE  
  9Y-3107 M [1] BOLT  
2. [1] SPRING-TORSION  
3. 4P-9490 [1] SHAFT AS-SHUT-OFF  
  4P-9489 [1] SHAFT-SHUT OFF  
  4P-9491 [1] SHIM-SHUT OFF  
  4P-9492 [1] BRACKET-SHAFT  
  4P-9493 [1] LEVER-SHUT OFF  
  4P-9494 [1] SPRING-SHUT OFF  
  105-0585 [1] LEVER-SHUT-OFF  
  9X-8902 M [4] BOLT-SOCKET HEAD  
4. 6V-5213 M [2] BOLT-SOCKET HEAD  
5. 7W-5615 [1] SLEEVE AS-PUMP  
  1W-0565 [1] RING-RETAINING  
6. 4D-9986 [2] SEAL-O-RING  
7. 4P-3953 [1] PISTON AS  
8. 7E-0156 [1] FITTING-INLET  
9. 4P-4224 [1] COVER-TRANSFER PUMP  
10. 7C-5294 [1] SPRING  
11. 8C-6364 M [3] BOLT-SOCKET HEAD  
12. 7E-9898 [1] CONNECTOR-ORIFICE  
13. 3J-1907 [2] SEAL-O-RING  
14. 7W-7383 [2] VALVE AS-CHECK  
15. 7E-3943 [1] LEVER-CONTROL  
16. 9Y-9846 M [1] SCREW-LOCATING  
17. 6L-8598 [2] RING-RETAINING  
18. 4P-3538 [1] SHAFT-THROTTLE  
19. 7E-3944 [1] SLEEVE  
  M   METRIC PART
 

Information:

Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly
Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Information Release Memo
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor & Fuel Transfer Pump
3116 ENGINE SUPPLEMENT FOR CP-533 & CS-533 VIBRATORY COMPACT
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06
Mechanical Unit Injector Identification Code{1290}
1995/12/18
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01
Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01
New Service Tool Calibration Pins For Mechanical Governed Engines{1264,1265}
1996/07/08
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13

Caterpillar Parts SIS Catalog CS-533 :

CONTROL GP-GOVERNOR
7E-9429 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
7W-6989 CONTROL GP-FUEL INJECTION
MUFFLER GP
104-6080 MUFFLER GP
LINES GP-AIR
1W-6029 LINES GP-AIR
AIR CLEANER GP
7C-9756 AIR CLEANER GP
COVER GP-INLET MANIFOLD
1N-4877 COVER GP-INLET MANIFOLD
4P-4686 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
6I-2278 CARTRIDGE GP-TURBOCHARGER
FASTENER GP-GOVERNOR
7W-4812 FASTENER GP-GOVERNOR
GOVERNOR GP-UNIT INJECTOR
4P-5512 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5512 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5512 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
4P-5503 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6179 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-6179 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
131-4852 GOVERNOR GP-UNIT INJECTOR

Truck sale:

2002 CAT CS-533
Call 
2002 CAT CS-533

CTC Plant
Cape Town, South Africa
CAT CS-533
 
CAT CS-533

Carter CAT Rental
CAT CS-533
 
CAT CS-533

Carter CAT Rental
CAT CS-533
 
CAT CS-533

Carter CAT Rental
CAT CS-533
 
CAT CS-533

Carter CAT Rental
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.