1W-5082 CYLINDER BLOCK GP S/N 48W39842-99999 PART OF 6I-2565 ENGINE AR PM-565 COLD PLANER

BASIC ENGINE

CYLINDER BLOCK GP

0. 1W-5082 CYLINDER B
1. 1W-5084 CYLINDER B

CYLINDER HEAD GP

2. 105-3788 CYLINDER H
3. 143-0040 CYLINDER H
4. 7W-2223 CYLINDER H
5. 7W-2225 CYLINDER H
6. 4W-7005 CYLINDER H
7. 7W-2224 CYLINDER H
8. 7W-2224 CYLINDER H

DAMPER GP

9. 1W-0998 DAMPER GP
0. INFORMATION

COLD PLANER PM-565 COLD PLANER 3TK
PM-565 Cold Planer 3TK00001-00112 (MACHINE) POWERED BY 3408 Engine KEBP0105 PM-565 3TK (1992)

BASIC ENGINE

CYLINDER BLOCK GP

1W-4989 COVER GP-CYLINDER BLOCK

110-3779 CYLINDER BLOCK AS

122-2245 CYLINDER BLOCK AS

1W-5081 CYLINDER BLOCK AS

1W-5082 CYLINDER BLOCK GP

1W-5084 CYLINDER BLOCK GP

#KEBP01050020

1W-5082: CYLINDER BLOCK GP

CYLINDER BLOCK GP

1W-5082 CYLINDER BLOCK GP
S/N 48W39842-99999
PART OF 6I-2565 ENGINE AR

i00107807 KEBP0105

For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-4990	[8]	JET AS-PISTON COOLING
2.	4N-1650	[4]	DOWEL
3.	8T-6763	[4]	PLUG-PIPE (1/4-18-THD)
4.	110-3779 CY	[1]	CYLINDER BLOCK AS
5.	8T-6757	[7]	PLUG-PIPE
6.	6N-9133	[2]	GASKET-PLATE
7.	6I-4613	[2]	PLATE-SPACER
8.	4N-0693	[3]	PLUG-TAPERLOCK (1-1/2-12-THD)
			-OR-
	7C-9614	[3]	PLUG-TAPERLOCK (1-5/8-12-THD)
9.	4N-0683	[4]	DOWEL
10.	7E-6479	[8]	BOLT-SPECIAL (OIL JET)
11.	3B-0645	[1]	PLUG-CUP
12.	6L-4428	[3]	STUD-TAPERLOCK (3/8-16X4.01-IN)
13.	114-4427 C	[2]	SEAL-O-RING
14.	7W-6534	[2]	PLUG-PIPE
15.	5P-8356	[2]	SEAL-O-RING
16.	3S-6605	[2]	PLUG-CUP
17.	9S-4190	[2]	PLUG-O-RING (7/8-14-THD)
18.	8T-6764 B	[1]	PLUG-PIPE (1/8-27-THD)
19.	7C-7407	[1]	STUD
20.	7W-6534 J	[1]	PLUG-PIPE
21.	9S-4190 BJ	[2]	PLUG-O-RING (7/8-14-THD)
	114-4427 BCJ	[2]	SEAL-O-RING
22.	7W-6534 J	[1]	PLUG-PIPE
23.	7W-6534 B	[1]	PLUG-PIPE
24.	7W-6534 B	[1]	PLUG-PIPE

	4W-6061 AFL		SLEEVE
	4W-4588 AFN		SLEEVE-LIFTER BORE
	9Y-3368 AFN		INSERT-LINER SEAT (0.822-MM THK)
	6I-4361 AFN		INSERT-LINER SEAT (0.772-MM THK)
	6I-4362 AFN		INSERT-LINER SEAT (0.872-MM THK)
	2W-3815 AFN		INSERT-LINER SEAT (1.605-MM THK)
	6I-4363 AFN		INSERT-LINER SEAT (1.555-MM THK)
	6I-4364 AFN		INSERT-LINER SEAT (1.655-MM THK)
	5N-0093 AFN		INSERT-LINER SEAT (2.71-MM THK)
	6I-4365 AFN		INSERT-LINER SEAT (2.66-MM THK)
	6I-4366 AFN		INSERT-LINER SEAT (2.76-MM THK)
	101-0523 AFN		INSERT-LINER SEAT (5.21-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	J		MOUNTED ON LH SIDE OF CYLINDER BLOCK
	L		FOR SALVAGE OF BOTTOM LINER O-RING BORE, QUANTITY TO BE DETERMINED BY USER
	N		FOR SALVAGE OF DAMAGED CYL BLOCK LIFTER BORES REFER TO SEBF8076 IN SIS WEB
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#KEBP01050021

1W-5084: CYLINDER BLOCK GP

CYLINDER BLOCK GP

1W-5084 CYLINDER BLOCK GP
S/N 48W34817-39841
FIELD REPLACEMENT FOR @@@@@ 1W-5081@@@@@

i00107808 KEBP0105

For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-7410	[6]	PLUG-PIPE (9.53MM PIPE THD)
2.	9S-4190	[4]	PLUG-O-RING (7/8-14-THD)
	2M-9780	[4]	SEAL-O-RING
3.	9F-2247 C	[7]	PLUG-PIPE (3.18MM PIPE THD)
4.	3J-5389	[2]	PLUG (EXTERNAL)(12.70MM PIPE THD)
5.	4N-6658	[2]	BUSHING (1.3-IN WIDE)
6.	3S-6605	[2]	PLUG-CUP (8.05MM OD)
7.	4N-0685	[3]	BUSHING (1-IN WIDE)
8.	3B-0645	[1]	PLUG-CUP (32.08MM OD)
9.	7E-6479 C	[8]	BOLT-SPECIAL (OIL JET)
10.	7W-4990 C	[8]	JET AS-PISTON COOLING
11.	4N-0693	[3]	PLUG-TAPERLOCK (1-1/2-12-THD)(38.10MM OD)
			-OR-
	7C-9614 C	[3]	PLUG-TAPERLOCK (1-5/8-12-THD)(41.28MM OD)
12.	7H-3171	[4]	PLUG-PIPE
13.	4N-5858	[5]	CAP (CRANKSHAFT BEARING)
14.	3P-1323	[10]	BOLT-BEARING CAP (7/8-14X7.75-IN)
	9H-1031	[10]	WASHER-HARD (24X41.5X6-MM THK)
15.	5M-6214 C	[1]	PLUG (1/8-27 PTF)
	C		CHANGE FROM PREVIOUS TYPE

#KEBP01050022

105-3788: CYLINDER HEAD AS

CYLINDER HEAD AS

105-3788 CYLINDER HEAD AS
S/N 48W35357-99999
PART OF 7W-2224 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7W-2225@@@@@

i00093513 KEBP0105

For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-0645	[6]	PLUG-CUP
2.	4N-5893	[8]	INSERT-VALVE SEAT (INLET)(STANDARD)
	7C-7602 AB		INSERT-VALVE SEAT (0.13-MM OS, INLET)
	7C-7603 AB		INSERT-VALVE SEAT (0.25-MM OS, INLET)
	7C-7604 AB		INSERT-VALVE SEAT (0.51-MM OS, INLET)
	7C-7605 AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
3.	1W-5283	[8]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	7C-5353 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
	7C-5354 AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
4.	3B-0623	[8]	PLUG-CUP
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

#KEBP01050023

143-0040: CYLINDER HEAD AS

CYLINDER HEAD AS

143-0040 CYLINDER HEAD AS
S/N 48W34817-UP
PART OF 7W-2225 CYLINDER HEAD AS

i00566895 KEBP0105

For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-0645	[6]	PLUG-CUP
2.	4N-5893	[8]	INSERT-VALVE SEAT (INLET)(STANDARD)
	7C-7602 AB		INSERT-VALVE SEAT (0.13-MM OS, INLET)
	7C-7603 AB		INSERT-VALVE SEAT (0.25-MM OS, INLET)
	7C-7604 AB		INSERT-VALVE SEAT (0.51-MM OS, INLET)
	7C-7605 AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
3.	1W-5283	[8]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	7C-5353 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
	7C-5354 AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
4.	3B-0623	[8]	PLUG-CUP
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

#KEBP01050024

7W-2223: CYLINDER HEAD AS

CYLINDER HEAD AS

7W-2223 CYLINDER HEAD AS
S/N 48W34817-35356
PART OF 7W-2224 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7W-2225@@@@@

i00108210 KEBP0105

For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-0645	[6]	PLUG-CUP
2.	4N-5893	[8]	INSERT-VALVE SEAT (INLET)(STANDARD)
	7C-7602 ABF		INSERT-VALVE SEAT (0.13-MM OS, INLET)
	7C-7603 ABF		INSERT-VALVE SEAT (0.25-MM OS, INLET)
	7C-7604 ABF		INSERT-VALVE SEAT (0.51-MM OS, INLET)
	7C-7605 ABF		INSERT-VALVE SEAT (0.76-MM OS, INLET)
3.	1W-5283	[8]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	7C-5353 ABF		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
	7C-5354 ABF		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
4.	3B-0623	[8]	PLUG-CUP
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN

#KEBP01050025

7W-2225: CYLINDER HEAD AS

CYLINDER HEAD AS

7W-2225 CYLINDER HEAD AS
S/N 48W34817-99999
FIELD REPLACEMENT FOR @@@@@ 7W-2223@@@@@, @@@@@105-3788@@@@@

i00093453 KEBP0105

For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	143-0040 Y	[1]	CYLINDER HEAD AS
2.	2N-5775	[8]	DOWEL
3.	173-7188	[16]	GUIDE-VALVE (STANDARD)
	7C-5306 AB		GUIDE-VALVE (0.51-MM OS)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

#KEBP01050026

4W-7005: CYLINDER HEAD GP

CYLINDER HEAD GP

4W-7005 CYLINDER HEAD GP
S/N 48W34817-99999
PART OF 6I-2565 ENGINE AR

i00107976 KEBP0105

For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-8071 C	[1]	BRACKET-FUEL PUMP
2.	3B-1915 C	[1]	BOLT (3/8-16X1.375-IN)
3.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
4.	0S-1608 C	[1]	BOLT (3/8-16X3.75-IN)
5.	1A-5183	[1]	BOLT (3/8-16X4.75-IN)
6.	5B-2638	[1]	BOLT (3/8-16X5.25-IN)
7.	6N-6731	[1]	SUPPORT-HOUSING (LH)
8.	7E-7308	[2]	GASKET-CYLINDER HEAD
9.	2H-3750	[28]	BOLT (3/4-16X7.5-IN)
10.	5H-1504	[28]	WASHER-HARD (20X33.5X5-MM THK)
11.	7W-2224 Y	[2]	CYLINDER HEAD GP
12.	0L-1352 C	[7]	BOLT (3/8-16X3.25-IN)
13.	8T-6764 C	[1]	PLUG-PIPE (1/8-27-THD)
14.	0L-1352 CB	[4]	BOLT (3/8-16X3.25-IN)
15.	4N-0932 B	[2]	PLUG-CUP
16.	5P-0063 B	[4]	PLUG-CUP
17.	100-6920 C	[8]	ADAPTER-NOZZLE
18.	3E-6772	[32]	SEAL (WATER)
19.	106-1792	[16]	STUD-TAPERLOCK (3/8-16X4-IN)
20.	7X-7731 C	[2]	PLUG-PIPE (3/4-14-THD)
21.	8T-6762 C	[4]	PLUG-PIPE (1/2-14-THD)
22.	4N-7253	[8]	GASKET-CHAMBER
23.	8T-6764 C	[1]	PLUG-PIPE (1/8-27-THD)
24.	6N-6732	[1]	SUPPORT-HOUSING (RH)
25.	5B-2638	[1]	BOLT (3/8-16X5.25-IN)
26.	1A-5183	[1]	BOLT (3/8-16X4.75-IN)
27.	5M-2894	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
28.	0S-1591	[1]	BOLT (3/8-16X1.5-IN)
29.	8S-9191	[2]	BOLT (3/8-16X4-IN)
30.	1W-5207	[1]	BRACKET-FUEL PUMP
31.	8M-5249 C	[8]	SEAL-O-RING
32.	8T-6762 CB	[2]	PLUG-PIPE (1/2-14-THD)(LH)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#KEBP01050027

7W-2224: CYLINDER HEAD GP

CYLINDER HEAD GP

7W-2224 CYLINDER HEAD GP
S/N 48W34817-35356
PART OF 4W-7005 CYLINDER HEAD GP

i00108211 KEBP0105

For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-2223 Y	[1]	CYLINDER HEAD AS
2.	2W-2622	[8]	VALVE-INLET
3.	2N-5775	[8]	DOWEL
4.	2A-4429	[32]	LOCK-RETAINER
5.	6N-7175	[16]	ROTOCOIL AS
			(EACH INCLUDES)
	6N-7174 C	[1]	SHIELD-OIL
6.	4N-5906	[16]	SPRING-VALVE
7.	1W-3860	[8]	VALVE-EXHAUST
8.	173-7188	[16]	GUIDE-VALVE (STANDARD)
	7C-5306 AB		GUIDE-VALVE (0.51-MM OS)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#KEBP01050028

7W-2224: CYLINDER HEAD GP

CYLINDER HEAD GP

7W-2224 CYLINDER HEAD GP
S/N 48W35357-99999
PART OF 4W-7005 CYLINDER HEAD GP

i00108212 KEBP0105

For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	105-3788 CY	[1]	CYLINDER HEAD AS
2.	115-2368	[8]	VALVE-INLET
3.	2N-5775	[8]	DOWEL
4.	2A-4429	[32]	LOCK-RETAINER
5.	6N-7175	[16]	ROTOCOIL AS
			(EACH INCLUDES)
	6N-7174	[1]	SHIELD-OIL
6.	4N-5906	[16]	SPRING-VALVE
7.	115-2367	[8]	VALVE-EXHAUST
8.	173-7188	[16]	GUIDE-VALVE (STANDARD)
	7C-5306 AB		GUIDE-VALVE (0.51-MM OS)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#KEBP01050029

1W-0998: DAMPER GP

DAMPER GP

1W-0998 DAMPER GP
S/N 48W34817-99999
PART OF 6I-2565 ENGINE AR

i00093381 KEBP0105

For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4N-2109	[1]	ADAPTER-DAMPER
2.	1A-3203	[6]	BOLT (5/8-18X4.75-IN)
	4D-3704	[6]	WASHER-HARD (17X30X5-MM THK)
3.	338-9808	[1]	DAMPER AS
	R		REMANUFACTURED PART MAY BE AVAILABLE

Information:

BASIC ENGINE

CYLINDER BLOCK GP

Truck Engine News

The Cylinder Liners Have a New Appearance {1216}
2005/03/01

Special Instruction

Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Installation Of 7N9013 Gasket Service Group{1101, 1221}
Installation Of 7N9013 Gasket Service Group{1101, 1221}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}

Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}

Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}

Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}

Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}

Service Letter-NACD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Australia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-CFEL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-CSARL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Americas

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Brazil

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Truck/Ag/Marine

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Technical Information Bulletin

0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks

Hydraulic Actuated Electronically Controlled Unit Injector (HEUI) Manifold In Engine Cylinder Head Group May Leak
Hydraulic Actuated Electronically Controlled Unit Injector (HEUI) Manifold In Engine Cylinder Head Group May Leak

Liner Flange Breakage
Liner Flange Breakage

Specifications

Cylinder Block
3408 VEHICULAR ENGINE

Cylinder Liners
3408 VEHICULAR ENGINE

Cylinder Liner Projection
3408 VEHICULAR ENGINE

Connecting Rod And Main Bearing Journals
3408 VEHICULAR ENGINE

Cover Group
3408 VEHICULAR ENGINE

Cylinder Block
3408C ENGINE FOR CATERPILLAR BUILT MACHINES

Cylinder Liners
3408C ENGINE FOR CATERPILLAR BUILT MACHINES

Cylinder Liner Projection
3408C ENGINE FOR CATERPILLAR BUILT MACHINES

Connecting Rod And Main Bearing Journals
3408C ENGINE FOR CATERPILLAR BUILT MACHINES

Cylinder Block
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Liner
3408E and 3412E Engines for Caterpillar Built Machines

Tool Operating Manual

9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}

362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}

Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}

Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

Service Letter-China

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Asia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Service Letter-APD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Testing and Adjusting

Cylinder Block - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Excessive Bearing Wear - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Main Bearings - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Liner Projection - Inspect
3408E and 3412E Engines for Caterpillar Built Machines

Disassembly and Assembly

Camshaft Bearings
3408 VEHICULAR ENGINE

Spacer Plates
3408 VEHICULAR ENGINE

Piston Cooling Tubes
3408 VEHICULAR ENGINE

Cylinder Liners
3408 VEHICULAR ENGINE

Crankshaft Main Bearings
3408 VEHICULAR ENGINE

Camshaft Bearings
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES

Spacer Plates
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES

Piston Cooling Tubes
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES

Cylinder Liners
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES

Crankshaft Main Bearings
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES

Bearing Clearance - Check
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Liner - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines

Camshaft Bearings - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Remove
3408E and 3412E Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Install
3408E and 3412E Engines for Caterpillar Built Machines

Cylinder Liner - Install
3408E and 3412E Engines for Caterpillar Built Machines

Service Magazine

Crankshaft Failures; New Thrust Plate{1203,1202,1230}
1981/05/04

Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13

New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

New Crankshaft Main Bearings Used{1203}
1982/05/10

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings{1211,0621}
1982/11/22

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

New Liner Seat Insert Available{1217}
1983/08/15

New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23

New Cylinder Block Groups Used{1201}
1984/10/01

Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11

Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15

New Cylinder Liner Available{1201}
1986/02/10

Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28

Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26

Stronger Timing Gear Housing; Additional Stud Used At Top Of Housing{1151,1201}
1987/02/23

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20

Recommendations For Preventing Cooling System Damage {1201}
1987/08/31

Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09

A Gasket Group Is Available To Give Improved Sealing For The Oil Supply To The Rocker Arms On Early Engines{1101,1102,1221}
1978/04/03

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

New Information On Reusable Cylinder Liners{1216}
1978/06/19

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17

New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17

Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07

No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14

Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04

Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/11/28

New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/19

Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25

Flywheel Housing To Cylinder Block Joint Improvements {1157,1201}
1996/12/30

New 171-4660 Engine Stand Adapter Assembly Is Now Available {0701, 1000}
2000/04/17

Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24

The Cylinder Liners Have a New Appearance {1216}
2005/03/14

Caterpillar Parts SIS Catalog PM-565 :

1W-5082 CYLINDER BLOCK GP

1W-5081 CYLINDER BLOCK AS

122-2245 CYLINDER BLOCK AS

110-3779 CYLINDER BLOCK AS

1W-5010 CRANKSHAFT GP

1W-5009 CRANKSHAFT AS

4W-6828 COVER GP-VALVE MECHANISM

6I-2747 COVER GP-OIL PAN

1W-5084 CYLINDER BLOCK GP

105-3788 CYLINDER HEAD AS

143-0040 CYLINDER HEAD AS

7W-2223 CYLINDER HEAD AS

7W-2225 CYLINDER HEAD AS

4W-7005 CYLINDER HEAD GP

7W-2224 CYLINDER HEAD GP

Truck sale:

CATERPILLAR PM-565 1995
- COLD PLANERS
ATLANTIC CAT
175 Akerley Blvd - Dartmouth - Nova Sc

Call

2003 CAT PM-565

Earth Sales Group
Sachse, Texas

USD $55,000

1993 CAT PM-565

Earth Sales Group
Sachse, Texas

USD $65,000

1993 CAT PM-565

PARK EAST SALES
Troy, New York

USD $41,000

1997 CAT PM-565

Big D Heavy Equipment LLC
Dallas, Texas