AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N-0739 FLYWHEEL GP S/N 48W34817-99999 PART OF 6I-2565 ENGINE AR PM-565 COLD PLANER


BASIC ENGINE
FLYWHEEL GP
GEAR GP
HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
ENGINE GP
LIFTING GP-ENGINE
AIR COMPRESSOR GP
PAN GP-OIL

COLD PLANER PM-565 COLD PLANER 3TK
 PM-565 Cold Planer 3TK00001-00112 (MACHINE) POWERED BY 3408 Engine KEBP0105 PM-565 3TK   (1992)

BASIC ENGINE

FLYWHEEL GP
FLYWHEEL GP
4N-0739 FLYWHEEL GP
 

#KEBP01050030
 

4N-0739: FLYWHEEL GP

4N-0739 FLYWHEEL GP
S/N 48W34817-99999
PART OF 6I-2565 ENGINE AR
i00166649 KEBP0105
4N0739 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3499 [1] FLYWHEEL AS  
1A. 4N-2514 [1] GEAR (113-TEETH)  
2. 1A-3203 [12] BOLT (5/8-18X4.75-IN)  
3. 4D-3704 [12] WASHER-HARD (17X30X5-MM THK)  
 

#KEBP01050031
 

7N-2840: GEAR GP-FRONT

7N-2840 GEAR GP-FRONT -TIMING
S/N 48W34817-99999
PART OF 6I-2565 ENGINE AR
i00108183 KEBP0105
7N2840 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-2695 [4] BOLT (5/16-18X0.875-IN)  
2. 112-9217 [1] PLATE-THRUST  
3. 271-5661 C [1] GEAR AS-IDLER (43/80-TEETH)  
  131-7123 [1] BUSHING  
  1B-8705 [1] KEY-WOODRUFF  
5. 3G-2292 [5] BOLT-LOCKING (3/8-16X0.87-IN)  
6. 117-9712 [1] SHAFT-DRIVE IDLER  
7. 7E-5661 C [1] GEAR-OIL PUMP DRIVE (69-TEETH)  
  1B-8705 [1] KEY-WOODRUFF  
8. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
9. 1P-7346 [1] WASHER-HARD (10.2X35X6-MM THK)  
10. 7N-2443 [1] WASHER-THRUST (2.508X3.5X0.188-IN THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP01050032
 

6I-1970: GEAR GP-REAR

6I-1970 GEAR GP-REAR
S/N 48W34817-99999
PART OF 6I-2565 ENGINE AR
i00393107 KEBP0105
6I1970 GEAR GP-REAR Parts scheme 6I1970 GEAR GP-REAR Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
2. 1A-2029 [10] BOLT (3/8-16X1.125-IN)  
3. 2W-8401 [1] ADAPTER-HYDRAULIC PUMP  
4. 6V-4589 [1] SEAL-O-RING  
5. 030-8194 [1] CONNECTOR  
6. 4N-7183 [1] RING-RETAINING  
7. 8N-7806 I [1] HOSE AS  
8. 9X-7371 [1] SEAL-O-RING  
9. 5P-1370 [1] BEARING AS-ROLLER  
10. 1T-0720 [6] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
11. 2W-8402 [1] GEAR (15 & 64 TEETH)  
12. 4N-1230 [1] SEAL-O-RING  
13. 4N-1232 [1] WASHER-RETAINING  
14. 5F-7404 [1] LOCKNUT-BEARING  
15. 3G-2292 [4] BOLT-LOCKING (3/8-16X0.87-IN)  
16. 0S-1595 [2] BOLT (1/2-13X1.25-IN)  
17. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 8N-0605 [1] COVER-FLYWHEEL HOUSING  
19. 1A-2029 [6] BOLT (3/8-16X1.125-IN)  
20. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 9X-7371 [1] SEAL-O-RING  
22. 2W-7615 [1] GEAR-IDLER (64-TEETH)  
23. 2W-7675 [1] GEAR-CRANKSHAFT (64-TEETH)  
24. 4N-1235 [2] SHAFT-IDLER GEAR  
25. 2W-7609 [1] GEAR (64-TEETH)  
26. 4N-7183 [1] RING-RETAINING  
27. 4N-0684 [1] DOWEL  
28. 5P-1370 [1] BEARING AS-ROLLER  
29. 1D-4566 [8] BOLT (1/2-13X3.5-IN)  
30. 1T-0720 [6] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
31. 6V-7423 [2] BEARING AS-ROLLER  
32. 4N-0848 [1] SLEEVE-WEAR  
33. 5P-8429 [1] SEAL-O-RING  
34. 6V-3319 [1] SEAL-O-RING  
35. 5K-9065 [2] RING-RETAINING  
36. 5F-7403 [1] LOCKWASHER  
37. 4N-1720 [1] COVER-BALANCE WEIGHT  
38. 6I-1975 [1] ADAPTER AS-PUMP  
39. 1T-0550 [2] PIN-SPRING  
40. 2W-7611 [1] GEAR-BALANCER (64-TEETH)(64 TEETH)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP01050033
 

6I-4665: HOUSING GP-FLYWHEEL

6I-4665 HOUSING GP-FLYWHEEL
S/N 48W34817-99999
PART OF 6I-2565 ENGINE AR
i00399830 KEBP0105
6I4665 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
2. 161-7293 [1] GASKET-CYLINDER  
3. 0S-1619 [4] BOLT (3/8-16X3-IN)  
4. 5M-2894 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
6. 2P-2772 [2] COVER  
7. 4N-0933 [2] GASKET  
8. 8T-6765 [5] PLUG-PIPE (1/4-18-THD)  
9. 3S-0036 [2] PLUG-CORE  
10. 3D-2871 [2] STUD-TAPERLOCK (3/8-16X1.5-IN)  
11. 0L-1352 [1] BOLT (3/8-16X3.25-IN)  
12. 8M-9124 [1] WASHER (10X22.5X8-MM THK)  
13. 2H-6488 [8] BOLT (1/2-13X5-IN)  
14. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 9M-4225 [2] BOLT (3/8 NCX4 3/8)  
16. 8T-6761 [1] PLUG-PIPE (1-11-1/2 NPT THD)  
17. 1A-5964 [2] BOLT (3/8-16X4.5-IN)  
18. 6I-4664 [1] HOUSING AS-FLYWHEEL  
  1W-3136 [1] BAFFLE  
19. 0S-1588 [6] BOLT (3/8-16X1.25-IN)  
20. 230-6262 B SEALANT  
  B   USE AS REQUIRED
 

#KEBP01050034
 

4N-5226: HOUSING GP-FRONT

4N-5226 HOUSING GP-FRONT
S/N 48W34817-99999
TIMING GEAR
PART OF 6I-2565 ENGINE AR
i00107925 KEBP0105
4N5226 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-9145 C [1] GASKET-CYLINDER BLOCK  
2. 172-9314 C [1] HOUSING-TIMING GEAR  
3. 3K-3256 [2] STUD-TAPERLOCK (3/8-16X1.7-IN)  
4. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
5. 0L-1352 [2] BOLT (3/8-16X3.25-IN)  
6. 5M-2894 C [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 0L-1143 [3] BOLT (3/8-16X2.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP01050035
 

452-1341: KIT-ENGINE GASKET

452-1341 KIT-ENGINE GASKET
S/N 3TK1-112
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@ 6I-2565@@@@@
FIELD INSTALLATION
i05850489 KEBP0105
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6N-2508 [1] GASKET  
  7C-0307 [4] GASKET  
  193-9155 [1] GASKET  
  7W-5648 [1] GASKET  
  166-9145 [1] GASKET-CYLINDER BLOCK  
  142-5867 [1] SEAL-CRANKSHAFT (FRONT)  
  234-8937 [1] SEAL-INTEGRAL  
  6V-4314 [1] SEAL-O-RING  
  9X-7371 [1] SEAL-O-RING  
  109-0072 [3] SEAL-O-RING  
  109-0076 [1] SEAL-O-RING  
  112-1579 [1] SEAL-O-RING  
  112-1580 [1] SEAL-O-RING  
  125-9794 [1] SEAL-O-RING  
  214-7568 [1] SEAL-O-RING  
  2M-9780 [1] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#KEBP01050036
 

7N-1750: LIFTING GP-ENGINE

7N-1750 LIFTING GP-ENGINE
S/N 48W34817-99999
PART OF 6I-2565 ENGINE AR
i00108182 KEBP0105
7N1750 LIFTING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-1751 [2] BRACKET-LIFTING (FRONT, RH)  
2. 0S-1585 [2] BOLT (1/2-13X1.5-IN)  
  5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 5P-8245 B [6] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 0S-1585 B [6] BOLT (1/2-13X1.5-IN)  
  B   USE AS REQUIRED
 

#KEBP01050037
 

107-9373: LINES GP-AIR COMPRESSOR

107-9373 LINES GP-AIR COMPRESSOR
S/N 3TK1-112
PART OF 108-6531 CHANGEOVER AR, 107-9369, 116-7776 PNEUMATIC AR
i00476287 KEBP0105
1079373 LINES GP-AIR COMPRESSOR Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 061-6806 I [1] HOSE AS  
2. 107-9381 I [1] HOSE AS  
3. 107-9383 I [1] HOSE AS  
4. 107-9384 I [1] HOSE AS  
5. 107-9378 I [1] HOSE AS  
6. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
7. 9F-2247 [4] PLUG-PIPE  
8. 2N-3378 [3] ELBOW-FLARED  
9. 8B-2664 [2] BUSHING-REDUCER  
10. 001-7043 [1] ELBOW  
11. 2N-1287 [1] ELBOW-FLARED  
12. 032-1269 [3] ELBOW  
13. 7D-4903 [1] ADAPTER  
14. 061-9593 [1] BUSHING-REDUCER  
15. 1S-0996 [2] CLIP  
16. 9L-5254 [1] ELBOW  
17. 5P-1075 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
18. 030-7961 [1] ELBOW  
19. 6D-4636 [3] CLIP (LOOP)  
20. 4V-0611 [4] CLAMP  
21. 4V-0612 [2] PLATE  
22. 7X-0440 [2] BOLT (5/16-18X1.75-IN)  
23. 6V-8189 [2] NUT (5/16-18-THD)  
24. 030-8195 [1] CONNECTOR  
25. 6V-4589 [1] SEAL-O-RING  
26. 8C-3121 [2] BOLT (5/16-18X1.5-IN)  
27. 7K-1181 [1] STRAP-CABLE  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP01050038
 

116-7777: LINES GP-AIR COMPRESSOR

116-7777 LINES GP-AIR COMPRESSOR
S/N 3TK85-112
PART OF 116-7776 PNEUMATIC AR
i00489222 KEBP0105
1167777 LINES GP-AIR COMPRESSOR Parts scheme 1167777 LINES GP-AIR COMPRESSOR Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 138-2583 [1] HOSE AS  
2. 107-9392 I [1] HOSE AS  
3. 107-9388 I [1] HOSE AS  
4. 107-9393 I [1] HOSE AS  
5. 107-9391 I [1] HOSE AS  
6. 3B-7722 [1] BUSHING-PIPE  
7. 6B-9664 [1] VALVE-AIR RELIEF  
8. 2T-2396 [1] ELBOW  
9. 004-7626 [1] CONNECTOR (FLARED)  
10. 002-5299 [1] TEE-PIPE  
12. 6V-8397 [1] SEAL-O-RING  
13. 107-9385 I [1] HOSE AS  
14. 2N-3378 [1] ELBOW-FLARED  
15. 7X-5331 [2] ELBOW  
16. 6V-9836 [1] TEE-SWIVEL  
17. 6V-8994 [2] UNION (STRAIGHT)  
18. 6V-9168 [2] NUT (11/16-16-THD)  
19. 5E-8837 [2] ADAPTER  
20. 108-2706 [2] COUPLING  
21. 8C-7993 [2] COVER-DUST  
22. 2N-1287 [1] ELBOW-FLARED  
23. 4J-5477 [2] SEAL-O-RING  
24. 6V-8397 [7] SEAL-O-RING  
25. 6V-8398 [2] SEAL-O-RING  
26. 3J-1907 [2] SEAL-O-RING  
27. 6V-9851 [1] ELBOW  
28. 6D-4246 [1] CLIP (LOOP)  
29. 5P-2369 [1] CLIP  
30. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
31. 6V-8801 [1] NUT (3/8-16-THD)  
32. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
33. 6V-9850 [1] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP01050039
 

2W-0477: PAN GP-OIL

2W-0477 PAN GP-OIL -ENGINE
S/N 48W34817-99999
PROVIDES OIL PAN FOR DRILTECH APPLICATION
PART OF 6I-2565 ENGINE AR
i00166627 KEBP0105
2W0477 PAN GP-OIL Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-3203 C [32] BOLT-WASHER HEAD (3/8-16X1.25-IN)  
2. 4N-1151 [1] GASKET  
3. 6N-9055 [1] PAN-OIL  
4. 3B-0551 [3] PLUG-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Special Instruction
Installation Of Service Flywheel Groups For 3406, 3408 And 3412 Engines{1156}
Installation Of Service Flywheel Groups For 3406, 3408 And 3412 Engines{1156}
Specifications
Flywheel Housing
3408 VEHICULAR ENGINE
Flywheel Housing Bore
3408 VEHICULAR ENGINE
Flywheel Housing Runout<BR> Face Runout (axial eccentricity) of the Flywheel Housing:
3408 VEHICULAR ENGINE
Flywheel Group
3408 VEHICULAR ENGINE
Flywheel Runout
3408 VEHICULAR ENGINE
Flywheel Housing
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel
3408E and 3412E Engines for Caterpillar Built Machines
Flywheel Housing
3408E and 3412E Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel
SUPPLEMENT FOR 3408 ENGINE FOR PM-565 COLD PLANER
Camshaft Rear Gear And Balancer
3408 VEHICULAR ENGINE
Flywheel
3408 VEHICULAR ENGINE
Flywheel Housing
3408 VEHICULAR ENGINE
Flywheel
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel Housing
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Flywheel - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Flywheel - Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
Flywheel Housing To Cylinder Block Joint Improvements {1157,1201}
1996/12/30
New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/08/02
New Flywheel Housing Gasket For 3408 And 3412 Machine Engines {1152}
1999/10/25
A New Flywheel Assembly is Available for Off-Highway Trucks {1156}
2001/04/09

Caterpillar Parts SIS Catalog PM-565 :

DAMPER GP
1W-0998 DAMPER GP
CYLINDER HEAD GP
7W-2224 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2224 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7005 CYLINDER HEAD GP
CYLINDER HEAD AS
7W-2225 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2223 CYLINDER HEAD AS
CYLINDER HEAD AS
143-0040 CYLINDER HEAD AS
CYLINDER HEAD AS
105-3788 CYLINDER HEAD AS
GEAR GP-FRONT
7N-2840 GEAR GP-FRONT
GEAR GP-REAR
6I-1970 GEAR GP-REAR
HOUSING GP-FLYWHEEL
6I-4665 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
4N-5226 HOUSING GP-FRONT
452-1341 KIT-ENGINE GASKET
LIFTING GP-ENGINE
7N-1750 LIFTING GP-ENGINE
LINES GP-AIR COMPRESSOR
107-9373 LINES GP-AIR COMPRESSOR
LINES GP-AIR COMPRESSOR
116-7777 LINES GP-AIR COMPRESSOR

Truck sale:

CATERPILLAR PM-565 1995
 
CATERPILLAR PM-565 1995
- COLD PLANERS
ATLANTIC CAT
175 Akerley Blvd - Dartmouth - Nova Sc
2003 CAT PM-565
Call 
2003 CAT PM-565

Earth Sales Group
Sachse, Texas
1993 CAT PM-565
USD $55,000 
1993 CAT PM-565

Earth Sales Group
Sachse, Texas
1993 CAT PM-565
USD $65,000 
1993 CAT PM-565

PARK EAST SALES
Troy, New York
 
USD $41,000 
1997 CAT PM-565

Big D Heavy Equipment LLC
Dallas, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.