AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7N-4574 HOUSING GP-FUEL PUMP S/N 48W34817-99999 PART OF 4W-6012 PUMP GP-FUEL INJECTION PM-565 COLD PLANER


FUEL SYSTEM
PUMP GP-FUEL TRANSFER
LINES GP-FUEL INJECTION
LINES GP-FUEL
LINES GP-DRAIN
LINES GP-FUEL INJECTION
GOVERNOR GP
PUMP GP-FUEL INJECTION

COLD PLANER PM-565 COLD PLANER 3TK
 PM-565 Cold Planer 3TK00001-00112 (MACHINE) POWERED BY 3408 Engine KEBP0105 PM-565 3TK   (1992)

FUEL SYSTEM

PUMP GP-FUEL TRANSFER
DRIVE GP-GOVERNOR & FUEL PUMP
9N-3959 DRIVE GP-GOVERNOR & FUEL PUMP
FASTENER GP-FUEL INJ PUMP
9Y-3764 FASTENER GP-FUEL INJ PUMP
HOUSING GP-FUEL PUMP
7N-4574 HOUSING GP-FUEL PUMP
PUMP GP-FUEL TRANSFER
4W-5479 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
8N-1630 PUMP GP-FUEL TRANSFER
PUMP GP-GOV, FUEL INJ & TFR
4W-7199 PUMP GP-GOV, FUEL INJ & TFR
 

#KEBP01050100
 

7N-4574: HOUSING GP-FUEL PUMP

7N-4574 HOUSING GP-FUEL PUMP
S/N 48W34817-99999
PART OF 4W-6012 PUMP GP-FUEL INJECTION
i00108190 KEBP0105
7N4574 HOUSING GP-FUEL PUMP Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7266 [1] SHAFT-PUMP IDLER  
2. 7N-0242 [2] BUSHING  
3. 5B-9318 [1] BALL  
4. 4N-0775 [2] DOWEL-HOLLOW  
5. 8L-6565 [1] PIN-SPRING  
6. 9S-4160 [2] BUSHING  
7. 4M-1474 [4] PIN-LIFTER GUIDE  
8. 9L-9766 [2] PIN-PLUNGER LIFT  
9. 6N-8441 [2] BUSHING  
10. 4N-0899 [1] DOWEL-HOLLOW  
11. 1P-0232 [8] BALL  
  1P-0234 [8] DOWEL  
12. 4N-0952 C [1] PLUG-CUP  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP01050101
 

4W-7018: INJECTOR GP-FUEL

4W-7018 INJECTOR GP-FUEL
S/N 48W34817-99999
PART OF 7E-6847 LINES GP-FUEL INJECTION
i00107977 KEBP0105
4W7018 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-9098 [1] SEAL-CARBON STOP  
2. 7W-4482 [1] WASHER (17.14X9.76X3.18-MM THK)  
3. 271-2489 [1] SEAL-WASHER  
4. 9X-2836 [1] SCREW-BUTTON HEAD  
5. 114-3362 [1] SEAL-O-RING  
6. 1W-8791 [1] TIP AS-FUEL INJECTOR  
 

#KEBP01050102
 

100-4253: LINES GP-FUEL

100-4253 LINES GP-FUEL
S/N 48W34817-99999
PART OF 6I-2565 ENGINE AR
i00460140 KEBP0105
1004253 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-5279 I [1] HOSE AS  
2. 6V-8349 [1] TEE-O-RING PORT  
  4W-1968 [1] DAMPER-SURGE  
  3J-7354 [2] SEAL-O-RING  
3. 8M-0506 [1] ADAPTER-O-RING  
4. 030-7963 [1] ELBOW-FLARED  
5. 9S-4182 [1] PLUG (7/16-20-THD)  
6. 3J-1907 [4] SEAL-O-RING  
7. 030-7947 [1] ELBOW  
8. 2R-6806 [1] ADAPTER  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP01050103
 

7N-8243: LINES GP-FUEL DRAIN

7N-8243 LINES GP-FUEL DRAIN
S/N 48W34817-99999
FUEL TRANSFER PUMP
PART OF 6I-2565 ENGINE AR
i00108202 KEBP0105
7N8243 LINES GP-FUEL DRAIN Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6011 CD TUBE (0.9-M)  
2. 2B-2404 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#KEBP01050104
 

6I-0030: LINES GP-FUEL INJECTION

6I-0030 LINES GP-FUEL INJECTION
S/N 48W34817-99999
PART OF 7E-6847 LINES GP-FUEL INJECTION
i00108115 KEBP0105
6I0030 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0031 [1] LINE AS-FUEL INJECTION (NO. 1)  
2. 6I-0032 [1] LINE AS-FUEL INJECTION (NO. 2)  
3. 6I-0033 [1] LINE AS-FUEL INJECTION (NO. 3)  
4. 6I-0034 [1] LINE AS-FUEL INJECTION (NO. 4)  
5. 124-5945 [1] LINE AS-FUEL INJECTION (NO. 5)  
6. 6I-0036 [1] LINE AS-FUEL INJECTION (NO. 6)  
7. 124-5947 [1] LINE AS-FUEL INJECTION (NO. 7)  
8. 6I-0038 [1] LINE AS-FUEL INJECTION (NO. 8)  
9. 7C-6589 [2] CLAMP-FUEL LINE (THREADED)  
10. 7C-6525 [4] CLAMP-FUEL LINE (NON-THREADED)  
11. 5P-4939 [11] SCREW-MACHINE (10-24X15.88-IN)  
12. 104-3038 [1] SCREW-MACHINE  
13. 104-3039 [2] SCREW AS  
14. 7C-6591 [7] CLAMP-FUEL LINE (THREADED)  
15. 7C-7747 [12] CLAMP-FUEL LINE (NON-THREADED)  
16. 6I-2318 [1] BRACKET  
17. 6I-2319 [1] BRACKET  
18. 9Y-4578 [1] SPACER  
19. 1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
20. 1W-9169 [1] CLAMP-FUEL LINE (THREADED)  
21. 7M-9910 [3] SCREW-MACHINE (10-24X1-IN)  
22. 2W-7264 [2] CLAMP-FUEL LINE  
23. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
24. 4P-8487 [1] PLATE  
25. 4P-8260 [1] BRACKET  
26. 4B-2047 [4] NUT (10-24-THD)  
 

#KEBP01050105
 

7E-6847: LINES GP-FUEL INJECTION

7E-6847 LINES GP-FUEL INJECTION
S/N 48W34817-99999
PART OF 6I-2565 ENGINE AR
i00108151 KEBP0105
7E6847 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0030 CY [1] LINES GP-FUEL INJECTION  
2. 6V-4314 [1] SEAL-O-RING  
3. 068-8438 [4] SPACER (11.12X19.05X7.9-MM THK)  
  0S-1591 [4] BOLT (3/8-16X1.5-IN)  
4. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 1C-2251 [3] BOLT (3/8-16X1.87-IN)  
6. 1S-0004 [2] SEAL-O-RING  
7. 5B-1484 [8] NUT (3/4-10-THD)  
  5P-8119 [8] SEAL-O-RING  
8. 9Y-3969 C [8] LINE AS-FUEL INJECTION  
    (EACH INCLUDES)
  1H-1023 [1] SEAL-O-RING  
9. 4W-7018 Y [8] INJECTOR GP-FUEL  
10. 7W-2315 [8] RETAINER  
11. 9Y-4577 [1] BRACKET  
12. 7C-6589 [2] CLAMP-FUEL LINE (THREADED)  
  7C-6525 [2] CLAMP-FUEL LINE (NON-THREADED)  
  7M-9831 [4] SCREW-MACHINE (10-24X0.88-IN)  
  4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
13. 9Y-3358 [2] SPACER (12.52X17.14X16.8-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01050106
 

6N-5314: PISTON GP-GOVERNOR SERVO

6N-5314 PISTON GP-GOVERNOR SERVO
S/N 48W34817-99999
PART OF 4W-2921 PLATE GP-GOVERNOR ADAPTER
i00108127 KEBP0105
6N5314 PISTON GP-GOVERNOR SERVO Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1807 [1] CYLINDER-SERVO  
2. 5P-9757 C [1] SEAL-O-RING  
3. 8N-6983 [1] SLEEVE  
4. 8N-6978 [1] PISTON & VALVE AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP01050107
 

4W-2921: PLATE GP-GOVERNOR ADAPTER

4W-2921 PLATE GP-GOVERNOR ADAPTER
S/N 48W34817-99999
PART OF 4W-2922 GOVERNOR GP
i00107962 KEBP0105
4W2921 PLATE GP-GOVERNOR ADAPTER Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-8739 [1] BOLT-LOAD STOP  
2. 1W-4641 [1] RISER-GOVERNOR  
3. 1W-4640 [1] SEAT-SPRING  
4. 2P-8630 [1] DOWEL  
5. 7M-7193 [1] RACE-THRUST BEARING  
6. 7M-7219 [1] BEARING-THRUST  
7. 3K-0810 [1] RING-LOCK  
8. 6N-7818 [1] RING-LOCK  
9. 5P-5601 [2] SEAL-O-RING  
10. 9S-8008 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
11. 4W-2169 [1] PLATE AS-ADAPTER  
  6N-3175 [1] DOWEL  
12. 4N-0898 [1] DOWEL-HOLLOW  
13. 9M-2089 [1] DOWEL  
14. 7N-0579 [1] BUSHING  
15. 4N-3702 [1] WASHER  
  8N-6579 [1] SPRING  
16. 4W-7653 [1] BOLT-SPECIAL  
17. 6N-5314 Y [1] PISTON GP-GOVERNOR SERVO  
18. 9N-3323 [1] BRACKET AS-CONTROL  
  2S-7316 [1] DOWEL  
19. 7W-7129 [1] LEVER-RACK CONTROL  
20. 7N-2351 [1] PIN-CONTROL  
21. 034-4160 [2] BOLT-LOCKING (5/16-18X1-IN)  
22. 8M-6393 [1] RING-RETAINING  
23. 6N-4157 [1] GEAR AS (42 TEETH)  
  1W-6448 [2] DOWEL  
24. 9L-6509 [1] WEIGHT AS-GOVERNOR  
25. 6H-9691 [1] SEAL-O-RING  
26. 6N-8195 [1] RACE-THRUST BEARING  
27. 7N-7783 [1] SLEEVE-VALVE PILOT  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01050108
 

4W-6012: PUMP GP-FUEL INJECTION

4W-6012 PUMP GP-FUEL INJECTION
S/N 48W34817-99999
PART OF 4W-7199 PUMP GP-GOV, FUEL INJ & TFR
i00107967 KEBP0105
4W6012 PUMP GP-FUEL INJECTION Parts scheme 4W6012 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-2697 B [8] SPACER (1.026X1.285X0.17-IN THK)  
  2M-4208 B [8] SPACER (1.027X1.285X0.174-IN THK)  
  2M-4209 B [8] SPACER (1.027X1.285X0.178-IN THK)  
  2M-4210 B [8] SPACER (1.027X1.285X0.182-IN THK)  
  2M-4211 B [8] SPACER (1.027X1.285X0.186-IN THK)  
  2M-4212 B [8] SPACER (1.027X1.285X0.19-IN THK)  
  5M-2691 B [8] SPACER (1.027X1.285X0.194-IN THK)  
  5S-7189 B [8] SPACER (1.027X1.285X0.198-IN THK)  
2. 8N-6981 [8] LIFTER AS  
3. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
4. 7N-4574 Y [1] HOUSING GP-FUEL PUMP  
5. 8H-9204 [8] WASHER-FELT (19/32X7/8X5/16-IN THK)  
6. 7E-5085 [8] BUSHING-TERMINAL  
7. 9S-8008 [2] PLUG (1-1/16-12-THD)  
  3D-2824 [2] SEAL-O-RING  
8. 1T-0284 [1] BOLT-SOCKET HEAD (5/16-18X1-IN)  
9. 7N-2694 [1] BRACKET AS-CONTROL  
10. 6N-6955 [1] PIN  
11. 7N-2693 [1] SPRING-TORSION  
12. 4N-1572 [1] LINK-RACK  
13. 4N-0900 [1] RACK-REGULATOR  
  4N-0901 [1] RACK-REGULATOR  
14. 114-8718 [8] SEAL-O-RING  
15. 7W-0561 Y [8] PUMP GP-FUEL INJECTION  
16. 4W-8140 C [1] CAMSHAFT-FUEL PUMP  
17. 4N-0824 [1] VALVE AS-BYPASS (FUEL INJECTION PUMP)  
  7L-8696 [1] SPRING-BYPASS  
18. 3K-0360 [1] SEAL-O-RING  
19. 8N-0561 [1] GEAR-PUMP IDLER (9-TEETH)  
20. 6N-7695 [1] COVER-OIL PUMP  
  6L-5897 [2] BOLT (1/4-20X0.875-IN)  
21. 6N-4165 [1] PINION AS (12-TEETH)  
22. 6N-4090 [1] DOWEL  
23. 8N-0560 [1] GEAR-PUMP DRIVE (11-TEETH)  
24. 0S-1618 [3] BOLT (5/16-18X1-IN)  
25. 5M-6214 [1] PLUG (1/8-27 PTF)  
26. 5F-9144 [1] SEAL-O-RING  
27. 4N-0905 [1] GEAR-BEVEL (42-TEETH)  
28. 4N-0776 [1] RETAINER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01050109
 

7W-0561: PUMP GP-FUEL INJECTION

7W-0561 PUMP GP-FUEL INJECTION
S/N 48W34817-99999
PART OF 4W-6012 PUMP GP-FUEL INJECTION
i00108208 KEBP0105
7W0561 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-9171 [1] BONNET-VALVE  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-6987 [1] VALVE AS-CHECK (FUEL)  
4. 7W-1927 [1] RING-RETAINING  
5. 7W-0182 [1] PLUNGER & BARREL AS  
6. 7C-5278 C [1] BOLT-PLUNGER GEAR (FUEL PUMP)  
7. 7N-1066 C [1] WASHER-RETAINING  
  7N-1208 C [1] SPRING-LIFTER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Specifications
Fuel System Identification
3408 VEHICULAR ENGINE
Fuel Injection Pump
3408 VEHICULAR ENGINE
Governor
3408 VEHICULAR ENGINE
Fuel Injection Pump Housing
3408 VEHICULAR ENGINE
Governor Drive And Oil Pump
3408 VEHICULAR ENGINE
Automatic Timing Advance Unit<BR> (4N677, 6N3195 And 9N3959)
3408 VEHICULAR ENGINE
Fuel Ratio Control
3408 VEHICULAR ENGINE
Fuel Transfer Pump
3408 VEHICULAR ENGINE
Fuel Transfer Pump Drive
3408 VEHICULAR ENGINE
Tachometer Drive
3408 VEHICULAR ENGINE
Governor
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Drive And Oil Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Information Release Memo
REMANUFACTURED FUEL TRANSFER PUMPS FOR 3408, 3412, 3408B, 3412B, 3408C AND 3412C INDUSTRIAL, GENSET, MARINE AND MACHINE APPLICATIONS
REMANUFACTURED FUEL TRANSFER PUMPS FOR 3408, 3412, 3408B, 3412B, 3408C AND 3412C INDUSTRIAL, GENSET, MARINE AND MACHINE APPLICATIONS
Testing and Adjusting
Fuel System Pressure - Test
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Transfer Pump
SUPPLEMENT FOR 3408 ENGINE FOR PM-565 COLD PLANER
Fuel Transfer Pump
3408 VEHICULAR ENGINE
Fuel Injection Pump Housing And Governor
3408 VEHICULAR ENGINE
Fuel Injection Pump Housing
3408 VEHICULAR ENGINE
Governor
3408 VEHICULAR ENGINE
Fuel Transfer Pump
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines{0650,1257}
1977/05/16
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/10
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25

Caterpillar Parts SIS Catalog PM-565 :

GOVERNOR GP
4W-2922 GOVERNOR GP
FILTER GP-PRIMARY FUEL
6N-1044 FILTER GP-PRIMARY FUEL
FILTER GP-FUEL
4N-1981 FILTER GP-FUEL
FILTER & LINES GP-FUEL
7R-9855 FILTER & LINES GP-FUEL
FASTENER GP-FUEL INJ PUMP
9Y-3764 FASTENER GP-FUEL INJ PUMP
DRIVE GP-TACHOMETER
2W-2094 DRIVE GP-TACHOMETER
DRIVE GP-GOVERNOR & FUEL PUMP
9N-3959 DRIVE GP-GOVERNOR & FUEL PUMP
CONTROL GP-GOVERNOR
3N-7741 CONTROL GP-GOVERNOR
INJECTOR GP-FUEL
4W-7018 INJECTOR GP-FUEL
LINES GP-FUEL
100-4253 LINES GP-FUEL
LINES GP-FUEL DRAIN
7N-8243 LINES GP-FUEL DRAIN
LINES GP-FUEL INJECTION
6I-0030 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7E-6847 LINES GP-FUEL INJECTION
PISTON GP-GOVERNOR SERVO
6N-5314 PISTON GP-GOVERNOR SERVO
PLATE GP-GOVERNOR ADAPTER
4W-2921 PLATE GP-GOVERNOR ADAPTER
PUMP GP-FUEL INJECTION
4W-6012 PUMP GP-FUEL INJECTION

Truck sale:

CATERPILLAR PM-565 1995
 
CATERPILLAR PM-565 1995
- COLD PLANERS
ATLANTIC CAT
175 Akerley Blvd - Dartmouth - Nova Sc
2003 CAT PM-565
Call 
2003 CAT PM-565

Earth Sales Group
Sachse, Texas
1993 CAT PM-565
USD $55,000 
1993 CAT PM-565

Earth Sales Group
Sachse, Texas
1993 CAT PM-565
USD $65,000 
1993 CAT PM-565

PARK EAST SALES
Troy, New York
 
USD $41,000 
1997 CAT PM-565

Big D Heavy Equipment LLC
Dallas, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.