AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-5479 PUMP GP-FUEL TRANSFER S/N 48W34817-99999 ONE SECTION GEAR PART OF 8N-1630 PUMP GP-FUEL TRANSFER PM-565


FUEL SYSTEM
PUMP GP-FUEL TRANSFER
GOVERNOR GP
TANK GP-FUEL
TORQUE CONTROL GP
ELECTRICAL AND STARTING SYSTEM
ALARM GP
ALTERNATOR GP-CHARGING

COLD PLANER PM-565 COLD PLANER 3TK
 PM-565 Cold Planer 3TK00001-00112 (MACHINE) POWERED BY 3408 Engine KEBP0105 PM-565 3TK   (1992)

FUEL SYSTEM

PUMP GP-FUEL TRANSFER
DRIVE GP-GOVERNOR & FUEL PUMP
9N-3959 DRIVE GP-GOVERNOR & FUEL PUMP
FASTENER GP-FUEL INJ PUMP
9Y-3764 FASTENER GP-FUEL INJ PUMP
HOUSING GP-FUEL PUMP
7N-4574 HOUSING GP-FUEL PUMP
PUMP GP-FUEL TRANSFER
4W-5479 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
8N-1630 PUMP GP-FUEL TRANSFER
PUMP GP-GOV, FUEL INJ & TFR
4W-7199 PUMP GP-GOV, FUEL INJ & TFR
 

#KEBP01050110
 

4W-5479: PUMP GP-FUEL TRANSFER

4W-5479 PUMP GP-FUEL TRANSFER
S/N 48W34817-99999
ONE SECTION GEAR
PART OF 8N-1630 PUMP GP-FUEL TRANSFER
i00166701 KEBP0105
4W5479 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-2694 [3] BOLT (5/16-18X2-IN)  
2. 8N-1628 [1] SHAFT AS  
3. 7S-4440 [1] BOLT  
  4N-7465 [1] GASKET  
4. 6V-8977 [1] SEAL-LIP TYPE  
5. 5J-5314 [3] BOLT (5/16-18X1.5-IN)  
6. 7N-6128 [1] COVER-TRANSFER PUMP  
7. 4N-1119 [1] GEAR-TRANSFER PUMP (10-TEETH)  
8. 4W-5478 [1] BODY AS-TRANSFER PUMP  
9. 7S-4433 [1] FERRULE  
10. 1P-2298 [1] VALVE AS  
11. 8F-6058 [1] BEARING  
12. 5P-9294 [1] SEAL-LIP TYPE  
13. 4N-7357 [1] BUSHING  
14. 6V-8977 [1] SEAL-LIP TYPE  
15. 1W-6177 [1] SHAFT-IDLER  
16. 6N-1069 [1] SPRING  
17. 2W-3294 [1] PLUNGER AS-VALVE  
18. 3K-8460 [1] PLUG (1/2-20-THD)  
  1J-9671 [1] SEAL-O-RING  
19. 6J-2419 [1] SEAL-O-RING  
   
  4B-4863 F [2] WASHER (4.7X11X1.2-MM THK)  
  F   NOT SHOWN
 

#KEBP01050111
 

8N-1630: PUMP GP-FUEL TRANSFER

8N-1630 PUMP GP-FUEL TRANSFER
S/N 48W34817-99999
PART OF 4W-7199 PUMP GP-GOV, FUEL INJ & TFR
i00166729 KEBP0105
8N1630 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4191 [1] PLUG (9/16-18-THD)  
2. 3J-1907 [1] SEAL-O-RING  
3. 9S-4182 [1] PLUG (7/16-20-THD)  
4. 3J-7354 [1] SEAL-O-RING  
5. 8N-1189 [1] ADAPTER-PUMP MOUNTING  
6. 4N-7437 [1] PLUG  
7. 7J-0204 [1] SEAL-O-RING  
8. 4W-5479 YC [1] PUMP GP-FUEL TRANSFER  
9. 4N-1105 [1] GASKET  
10. 8N-1626 [1] COUPLING-PUMP DRIVE  
11. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
12. 9S-9332 [1] FITTING-ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01050112
 

4W-7199: PUMP GP-GOV, FUEL INJ & TFR

4W-7199 PUMP GP-GOV, FUEL INJ & TFR
S/N 48W34817-99999
DIRECT
PART OF 6I-2565 ENGINE AR
i00194304 KEBP0105
4W7199 PUMP GP-GOV, FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3764 Y [1] FASTENER GP-FUEL INJ PUMP  
2. 2P-8643 [1] GASKET  
3. 4N-6681 [1] SPRING  
4. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)(FLAT)  
  2N-0828 [2] WASHER (SPRING)  
5. 4W-2922 Y [1] GOVERNOR GP  
6. 9N-2893 YC [1] TORQUE CONTROL GP  
7. 8N-1630 Y [1] PUMP GP-FUEL TRANSFER  
8. 4N-1104 [1] GASKET  
9. 4W-6012 Y [1] PUMP GP-FUEL INJECTION  
10. 4N-1868 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01050113
 

7R-9849: TANK GP-FUEL & WATER

7R-9849 TANK GP-FUEL & WATER
S/N 3TK1-112
PART OF 7R-9172 CHASSIS AR
i00419877 KEBP0105
7R9849 TANK GP-FUEL & WATER Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-2704 [1] TANK GP-FUEL & WATER  
2. 6R-3009 [2] PAD-REAR  
3. 117-8234 [1] PLATE AS-COVER  
4. 6R-3718 [1] GASKET  
5. 4L-6454 [14] BOLT (3/8-16X1-IN)  
6. 8T-4896 [14] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 7R-0376 [1] RIM  
8. 7R-0476 [1] STRAINER  
9. 7R-8588 [1] CAP AS (WATER TANK)  
10. 4B-1274 [6] SCREW-MACHINE (10-24X0.625-IN)  
11. 7T-2036 [1] CAP AS-FILLER (FUEL)  
11A. 3F-4134 [1] BAFFLE (FUEL TANK FILL CAP)  
11B. 4B-1663 [1] FILTER ELEMENT-FUEL (FUEL CAP)  
11C. 4B-5423 [1] GASKET  
11D. 4B-5949 [1] FILTER ELEMENT-FUEL (FUEL CAP)  
11E. 7B-2002 [1] WASHER (10.2X44.5X3-MM THK)  
11F. 7T-2009 [1] VALVE AS  
11G. 7T-2037 [1] GASKET  
12. 1P-7409 [3] EYEBOLT  
13. 3J-5389 [1] PLUG (EXTERNAL)  
14. 6R-3008 [2] PAD-RUBBER  
15. 9S-4185 [1] PLUG (3/4-16-THD)  
16. 3W-9812 [12] PLATE (6MM THK)  
17. 1K-6872 [12] LOCKNUT (1/2-13-THD)  
18. 033-6028 [1] SEAL-O-RING  
19. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
20. 6R-3640 [1] GAUGE-FUEL LEVEL  
21. 7B-9665 [2] PLUG  
22. 102-1699 [2] PAD  
 

#KEBP01050114
 

9N-2893: TORQUE CONTROL GP

9N-2893 TORQUE CONTROL GP
S/N 48W34817-99999
PART OF 4W-7199 PUMP GP-GOV, FUEL INJ & TFR
i00194525 KEBP0105
9N2893 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6452 [1] INSULATOR  
2. 1P-9958 [1] INSULATOR  
3. 2S-7391 [1] BAR-STOP (2.997 THICK)  
4. 3S-0602 [1] RETAINER-SPRING  
5. 4N-4218 [1] CONTACT  
6. 4N-7777 [1] SPACER (.2540MM. THICK)  
7. 8M-9062 [1] RETAINER-SPRING (3.05-MM THK)  
8. 9L-3625 [1] SPRING-TORQUE (.5588MM. THICK)  
9. 9L-9347 B [1] SHIM  
10. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
  B   USE AS REQUIRED
 

#KEBP01050115
 

3E-6328: ALARM GP

3E-6328 ALARM GP
S/N 3TK1-112
24-VOLT
PART OF 117-8247, 120-7706 WIRING GP-CONSOLE
i00089659 KEBP0105
3E6328 ALARM GP Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
 

#KEBP01050116
 

086-9498: ALTERNATOR GP-CHARGING

086-9498 ALTERNATOR GP-CHARGING
S/N 3TK1-61
PART OF 086-9598 INSTALLATION AR-ENGINE
i00462027 KEBP0105
0869498 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-7803 Y [1] ALTERNATOR GP-CHARGING (24-VOLT, 100-AMPERE)  
2. 8T-8919 [1] BOLT (1/2-13X1.75-IN)  
3. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 4N-8225 [1] PULLEY-ALTERNATOR (1-GROOVE)  
6. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
  4D-1326 [1] LOCKWASHER (EXTERNAL TOOTH)  
7. 0S-1587 [2] BOLT (1/2-13X1.75-IN)  
8. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 7W-2291 [1] BRACKET-ALTERNATOR  
10. 4S-5898 [1] SEAL-O-RING  
11. 4K-0367 [2] NUT-FULL (5/8-11-THD)  
12. 8S-5383 [1] BLOCK  
13. 1W-0380 [1] ROD  
14. 4H-3283 [1] BOLT (3/8-16X9.5-IN)  
15. 102-1502 [1] CABLE AS  
  5P-0747 E CABLE (00-GA, BLACK)(39CM)  
  030-1706 [1] TERMINAL-RING (00-GA, 1/4-IN SCREW)  
16. 1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
17. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
18. 4N-8278 [1] V-BELT SET (INCLUDES 3-BELTS)(INCLUDES 3 BELTS)  
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01050117
 

108-4552: ALTERNATOR GP-CHARGING

108-4552 ALTERNATOR GP-CHARGING
S/N 3TK62-112
PART OF 086-9598 INSTALLATION AR-ENGINE
i00483444 KEBP0105
1084552 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-6650 [1] V-BELT  
2. 4S-5898 [1] SEAL-O-RING  
3. 7X-0346 [1] BOLT (5/8-11X2-IN)  
4. 6V-8188 [1] NUT (1/2-13-THD)  
5. 107-5912 [1] CABLE AS  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0747 E CABLE (00-GA, BLACK)(53CM)  
  030-1706 [1] TERMINAL-RING (00-GA, 1/4-IN SCREW)  
6. 9X-7803 Y [1] ALTERNATOR GP-CHARGING (24-VOLT, 100-AMPERE)  
7. 4D-1326 [1] LOCKWASHER (EXTERNAL TOOTH)  
8. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-8917 [1] BOLT (1/2-13X1.25-IN)  
10. 8S-5383 [1] BLOCK  
11. 7X-0448 [3] NUT (5/8-11-THD)  
12. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
13. 4S-5780 [1] ROD  
14. 4N-8225 [1] PULLEY-ALTERNATOR (1-GROOVE)  
15. 8T-4835 [1] BOLT (1/2-13X2-IN)  
16. 5P-2566 [1] BOLT (1/2-13X1.5-IN)  
17. 7W-2291 [1] BRACKET-ALTERNATOR  
18. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
19. 107-4422 [1] BRACKET AS  
  7T-1099 [1] LINK  
20. 5P-2424 [1] BOLT (1/2-13X2.25-IN)  
21. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP01050118
 

197-8820: ALTERNATOR GP-CHARGING

197-8820 ALTERNATOR GP-CHARGING
S/N 3TK1-112
24-VOLT, 95-AMPERE
FIELD REPLACEMENT FOR @@@@@ 9X-7803@@@@@
i01691128 KEBP0105
1978820 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 185-2653 [1] FRAME  
2. 5S-7349 [1] BOLT (1/4-20X0.5-IN)  
3. 185-2639 [1] FAN AS  
4. 1H-3244 [1] LOCKWASHER  
5. 185-2645 [1] FRAME  
6. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
7. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
8. 228-9657 [1] COVER AS  
9. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 185-2647 [1] GROMMET  
11. 9L-6770 [1] CAP-DUST  
12. 205-0626 [1] STATOR AS-ALTERNATOR  
13. 185-2638 [2] COLLAR  
14. 185-2654 [1] PLATE  
15. 185-2650 [1] ROTOR AS  
16. 185-2644 [1] COIL AS  
17. 185-2648 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
18. 6V-8189 [1] NUT (5/16-18-THD)  
19. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 3F-9556 [1] LOCKWASHER  
21. 185-2655 [1] KIT-BEARING (ALTERNATOR)  
    (INCLUDES BEARINGS)
22. 199-8436 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLTS, GROMMET & NUTS)
23. 199-7891 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES INSULATORS, WASHERS & NUTS)
24. 185-2658 [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (INCLUDES BOLTS)
 

#KEBP01050119
 

316-7251: ALTERNATOR GP-CHARGING

316-7251 ALTERNATOR GP-CHARGING
S/N 3TK1-112
24-VOLT, 105-AMPERE
FIELD REPLACEMENT FOR @@@@@ 9X-7803@@@@@
i02990030 KEBP0105
3167251 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your PM-565 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
2. 1H-3244 [2] LOCKWASHER  
3. 6V-8187 [1] NUT (1/4-28-THD)  
4. 5S-7349 [1] BOLT (1/4-20X0.5-IN)  
5. 9L-6770 [1] CAP-DUST  
6. 231-6133 [1] KIT-BEARING  
  5P-3419 [1] RACE-BEARING INNER  
  229-9407 [1] BEARING AS  
7. 308-1362 [1] RECTIFIER AS  
8. 202-2708 [1] DIODE AS  
9. 3T-6354 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
10. 202-9897 [1] BEARING-SPECIAL BALL  
11. 100-6531 [1] FAN-ALTERNATOR (11-BLADE)  
12. 187-2034 [1] NUT-FLANGE (5/8-18-THD)  
13. 202-2783 [1] PLATE  
15. 202-2700 [1] FRAME  
16. 308-1365 [1] STATOR AS  
17. 308-1366 [1] COIL AS  
18. 9S-2390 [1] RETAINER  
19. 299-1761 [1] ROTOR AS  
20. 4B-2047 [1] NUT (10-24-THD)  
21. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
22. 8F-1434 [1] LOCKWASHER  
23. 202-2784 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES NUT, LOCKWASHER, WASHERS, INSULATORS, SCCREW, CONNECTORS, & ADAPTER)
24. 202-2785 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES STUD, BUSHINGS, WASHERS, CONNECTOR, & NUT AS)
25. 202-2786 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES NUTS, LOCKWASHER, BUSHINGS, WASHERS, CONNECTOR, & STUD)
   
  202-2787 F [1] KIT-HARDWARE  
    (INCLUDES NUT AS, PLUG, SCREW AS, SCREWS, LOCKWASHER, NUT, CONNECTOR, BOLTS, COLLAR, & BOOT)
  F   NOT SHOWN
 

Information:

Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Specifications
Fuel System Identification
3408 VEHICULAR ENGINE
Fuel Injection Pump
3408 VEHICULAR ENGINE
Governor
3408 VEHICULAR ENGINE
Fuel Injection Pump Housing
3408 VEHICULAR ENGINE
Governor Drive And Oil Pump
3408 VEHICULAR ENGINE
Automatic Timing Advance Unit<BR> (4N677, 6N3195 And 9N3959)
3408 VEHICULAR ENGINE
Fuel Ratio Control
3408 VEHICULAR ENGINE
Fuel Transfer Pump
3408 VEHICULAR ENGINE
Fuel Transfer Pump Drive
3408 VEHICULAR ENGINE
Tachometer Drive
3408 VEHICULAR ENGINE
Governor
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor Drive And Oil Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump Drive
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3408C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3408E and 3412E Engines for Caterpillar Built Machines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Information Release Memo
REMANUFACTURED FUEL TRANSFER PUMPS FOR 3408, 3412, 3408B, 3412B, 3408C AND 3412C INDUSTRIAL, GENSET, MARINE AND MACHINE APPLICATIONS
REMANUFACTURED FUEL TRANSFER PUMPS FOR 3408, 3412, 3408B, 3412B, 3408C AND 3412C INDUSTRIAL, GENSET, MARINE AND MACHINE APPLICATIONS
Testing and Adjusting
Fuel System Pressure - Test
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Transfer Pump
SUPPLEMENT FOR 3408 ENGINE FOR PM-565 COLD PLANER
Fuel Transfer Pump
3408 VEHICULAR ENGINE
Fuel Injection Pump Housing And Governor
3408 VEHICULAR ENGINE
Fuel Injection Pump Housing
3408 VEHICULAR ENGINE
Governor
3408 VEHICULAR ENGINE
Fuel Transfer Pump
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3408C DIESEL ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines{0650,1257}
1977/05/16
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/10
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25

Caterpillar Parts SIS Catalog PM-565 :

PUMP GP-FUEL INJECTION
7W-0561 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-6012 PUMP GP-FUEL INJECTION
PLATE GP-GOVERNOR ADAPTER
4W-2921 PLATE GP-GOVERNOR ADAPTER
PISTON GP-GOVERNOR SERVO
6N-5314 PISTON GP-GOVERNOR SERVO
LINES GP-FUEL INJECTION
7E-6847 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
6I-0030 LINES GP-FUEL INJECTION
LINES GP-FUEL DRAIN
7N-8243 LINES GP-FUEL DRAIN
LINES GP-FUEL
100-4253 LINES GP-FUEL
PUMP GP-FUEL TRANSFER
8N-1630 PUMP GP-FUEL TRANSFER
PUMP GP-GOV, FUEL INJ & TFR
4W-7199 PUMP GP-GOV, FUEL INJ & TFR
TANK GP-FUEL & WATER
7R-9849 TANK GP-FUEL & WATER
TORQUE CONTROL GP
9N-2893 TORQUE CONTROL GP
ALARM GP
3E-6328 ALARM GP
ALTERNATOR GP-CHARGING
086-9498 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
108-4552 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
197-8820 ALTERNATOR GP-CHARGING

Truck sale:

CATERPILLAR PM-565 1995
 
CATERPILLAR PM-565 1995
- COLD PLANERS
ATLANTIC CAT
175 Akerley Blvd - Dartmouth - Nova Sc
2003 CAT PM-565
Call 
2003 CAT PM-565

Earth Sales Group
Sachse, Texas
1993 CAT PM-565
USD $55,000 
1993 CAT PM-565

Earth Sales Group
Sachse, Texas
1993 CAT PM-565
USD $65,000 
1993 CAT PM-565

PARK EAST SALES
Troy, New York
 
USD $41,000 
1997 CAT PM-565

Big D Heavy Equipment LLC
Dallas, Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.