AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8I-0403 SCREED AR 10 FT ASPHALT SCREED


MACHINE ARRANGEMENT
SCREED AR
FUEL SYSTEM
FUEL GP-SCREED
LINES GP-FUEL
CONTROLS
ADJUSTER GP

ASPHALT SCREED 10 FT ASPHALT SCREED 3EL
 10-20B 10-20WB EXTEND-A-MAT Screed 3EL00001-UP KEBP0109 10 FT 3EL   (1992)

MACHINE ARRANGEMENT

SCREED AR
8I-0403 SCREED AR
 

#KEBP01090001
 

8I-0403: SCREED AR

8I-0403 SCREED AR
i00726532 KEBP0109
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8I-0257 Y [1] ADJUSTER GP-HEIGHT  
  8I-0344 Y [1] ARM GP-DROP  
  8I-0154 Y [1] BURNER GP  
  8I-0584 Y [1] CROWN GP  
    -OR-
  120-5898 Y [1] CROWN GP-MANUAL  
  8I-0292 Y [1] DEFLECTOR GP  
  8I-0471 Y [1] FINISH GP  
  8I-0002 Y [1] FRAME GP-MAIN  
    -OR-
  120-5905 Y [1] FRAME GP-SCREED  
  8I-0474 Y [1] GATE GP-END  
    -OR-
  120-4569 Y [1] GATE GP-END  
    -OR-
  145-9438 Y [1] GATE GP-END  
  8I-0658 Y [1] LINES GP-BURNER (DIESEL HEAT)  
  8I-0609 Y [1] LINES GP-EXTENSION  
  8I-0603 Y [1] LINES GP-VIBRATORY  
  8I-0177 Y [1] PLATE GP-SCREED (DIESEL HEAT)  
  8I-0406 Y [1] PLATFORM GP  
  8I-0214 Y [1] SLOPER GP-MANUAL  
  8I-0143 Y [1] VIBRATORY GP  
  8I-0599 Y [1] WIRING GP-SCREED  
  Y   SEPARATE ILLUSTRATION
 

#KEBP01090002
 

8I-0154: BURNER GP

8I-0154 BURNER GP
PART OF 8I-0403 SCREED AR
Type 1
i00423678 KEBP0109
8I0154 BURNER GP Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0156 [4] CHAMBER AS-LOWER BURNER  
2. 8T-4835 [16] BOLT (1/2-13X2-IN)  
3. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 141-9269 [4] CHAMBER AS-UPPER  
5. 141-9272 [4] PLATE-COVER  
6. 8T-8917 [16] BOLT (1/2-13X1.25-IN)  
7. 8J-1256 [8] CLIP  
8. 8I-0997 [4] CONNECTOR AS  
9. 8I-0998 [4] BRACKET-MOUNTING  
10. 5P-2566 [8] BOLT (1/2-13X1.5-IN)  
11. 6V-8188 [8] NUT (1/2-13-THD)  
12. 8M-6802 [16] SCREW-HEX SOCKET (1/4-20X1-IN)  
13. 8T-4205 [16] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 6V-8185 [16] NUT (1/4-20-THD)  
15. 103-7347 [4] MOTOR AS  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1813 BE SLEEVE  
16. 102-2697 [4] WHEEL-BLOWER  
17. 102-2698 [4] HOUSING-BLOWER  
18. 045-4065 [16] SCREW-MACHINE (10-32X0.75-IN)  
19. 9F-8125 [24] LOCKWASHER  
20. 102-2736 [4] SCREEN-INLET  
21. 030-9612 [24] SCREW-FORMING (10-24X0.5-IN)  
22. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
23. 102-2706 [4] RING-FLAME  
24. 102-2688 [4] NOZZLE  
25. 102-2725 [4] ADAPTER  
26. 111-8140 [4] VALVE-CHECK  
27. 8I-0164 [4] INSULATION  
28. 5P-1076 [16] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-1797 [4] TUBE  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#KEBP01090003
 

8I-0154: BURNER GP

8I-0154 BURNER GP
PART OF 8I-0403 SCREED AR
Type 2
i01370046 KEBP0109
8I0154 BURNER GP Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0156 [4] CHAMBER AS-LOWER BURNER  
2. 8T-4835 [16] BOLT (1/2-13X2-IN)  
3. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 192-5091 C [4] CHAMBER AS (UPPER)  
5. 141-9272 [4] PLATE-COVER  
6. 8T-8917 [16] BOLT (1/2-13X1.25-IN)  
7. 8J-1256 [8] CLIP  
8. 8I-0997 [4] CONNECTOR AS  
9. 8I-0998 [4] BRACKET-MOUNTING  
10. 5P-2566 [8] BOLT (1/2-13X1.5-IN)  
11. 6V-8188 [8] NUT (1/2-13-THD)  
12. 8M-6802 [16] SCREW-HEX SOCKET (1/4-20X1-IN)  
13. 8T-4205 [16] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 6V-8185 [16] NUT (1/4-20-THD)  
15. 103-7347 [4] MOTOR AS  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 102-2697 [4] WHEEL-BLOWER  
17. 102-2698 [4] HOUSING-BLOWER  
18. 045-4065 [16] SCREW-MACHINE (10-32X0.75-IN)  
19. 9F-8125 [24] LOCKWASHER  
20. 187-9760 C [4] PLATE  
21. 030-9612 [24] SCREW-FORMING (10-24X0.5-IN)  
22. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
23. 191-5983 C [4] CONE AS  
    (EACH INCLUDES)
  9X-6259 [1] SCREW-MACHINE (6-32X0.375-IN)  
  [1] LOCKNUT  
24. 187-9608 C [4] NOZZLE  
25. 102-2725 [4] ADAPTER  
26. 111-8140 [4] VALVE-CHECK  
27. 8I-0164 [4] INSULATION  
28. 5P-1076 [16] WASHER-HARD (13.5X30X4-MM THK)  
29. 104-1797 [4] TUBE  
30. 191-1035 C [4] PLUG  
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP01090004
 

8I-0658: LINES GP-BURNER

8I-0658 LINES GP-BURNER -DIESEL HEAT
PART OF 8I-0403 SCREED AR
Type 1
i00424205 KEBP0109
8I0658 LINES GP-BURNER Parts scheme 8I0658 LINES GP-BURNER Parts scheme 8I0658 LINES GP-BURNER Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5R-6307 [1] COUPLER AS-QUICK DISCONNECT (FEMALE)  
2. 5R-6301 [1] PLUG-DUST  
3. 3K-0360 [3] SEAL-O-RING  
4. 6V-8634 [1] CONNECTOR  
5. 6V-8397 [21] SEAL-O-RING  
6. 8I-0701 I [1] HOSE AS  
7. 7X-0820 [1] TEE  
8. 6V-9168 [3] NUT (11/16-16-THD)  
9. 8I-0702 I [1] HOSE AS  
10. 8I-0703 I [1] HOSE AS  
11. 5P-4653 [2] CONNECTOR  
12. 2P-1279 [2] LOCKNUT (9/16-18-THD)  
13. 5P-8998 [6] FITTING  
14. 7B-0192 [2] CONNECTOR  
15. 8I-0400 [2] ADAPTER  
16. 5P-4317 [2] CONNECTOR  
17. 3J-1907 [2] SEAL-O-RING  
18. 5P-6944 [2] ADAPTER  
19. 5R-6306 [2] COUPLER AS-QUICK DISCONNECT (MALE)  
20. 5R-6302 [2] CAP-DUST  
21. 7J-8611 [4] ELBOW-PIPE  
22. 8I-0399 [4] VALVE-BALL  
23. 2T-2310 [6] CONNECTOR  
24. 2T-2305 [2] ELBOW  
25. 6V-9850 [2] ELBOW  
26. 8I-0704 I [2] HOSE AS  
27. 8I-0705 I [1] HOSE AS  
28. 8I-0709 I [1] HOSE AS  
29. 6V-8994 [1] UNION (STRAIGHT)  
30. 6V-8980 [1] ELBOW  
31. 8S-7169 [2] COUPLING  
32. 8I-0706 I [1] HOSE AS  
33. 8I-0707 I [1] HOSE AS  
34. 003-8747 [2] ELBOW  
35. 5E-0114 [4] CLAMP  
36. 8M-2773 [4] CLIP (LOOP)  
37. 4M-6425 [2] BOLT (5/16-18X1-IN)  
38. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
39. 6V-8189 [3] NUT (5/16-18-THD)  
40. 8I-0697 BG SLEEVE-NYLON  
41. 077-8184 [4] CLAMP  
42. 8I-0714 BG SLEEVE-NYLON  
43. 8I-0715 BG SLEEVE-NYLON  
44. 4S-4456 [1] CLIP  
45. 3S-2093 [3] STRAP-CABLE  
46. 8C-8988 [1] ELBOW  
  B   USE AS REQUIRED
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP01090005
 

8I-0658: LINES GP-BURNER

8I-0658 LINES GP-BURNER -DIESEL HEAT
PART OF 8I-0403 SCREED AR
Type 2
i00424212 KEBP0109
8I0658 LINES GP-BURNER Parts scheme 8I0658 LINES GP-BURNER Parts scheme 8I0658 LINES GP-BURNER Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5R-6307 [1] COUPLER AS-QUICK DISCONNECT (FEMALE)  
2. 5R-6301 [1] PLUG-DUST  
3. 3K-0360 [3] SEAL-O-RING  
4. 6V-8634 [1] CONNECTOR  
5. 6V-8397 [21] SEAL-O-RING  
6. 116-8208 CI [1] HOSE AS  
7. 7X-0820 [1] TEE  
8. 6V-9168 [3] NUT (11/16-16-THD)  
9. 8I-0702 I [1] HOSE AS  
10. 8I-0703 I [1] HOSE AS  
11. 5P-4653 [2] CONNECTOR  
12. 2P-1279 [2] LOCKNUT (9/16-18-THD)  
13. 5P-8998 [6] FITTING  
14. 7B-0192 [2] CONNECTOR  
15. 8I-0400 [2] ADAPTER  
16. 5P-4317 [2] CONNECTOR  
17. 3J-1907 [2] SEAL-O-RING  
18. 5P-6944 [2] ADAPTER  
19. 5R-6306 [2] COUPLER AS-QUICK DISCONNECT (MALE)  
20. 5R-6302 [2] CAP-DUST  
21. 7J-8611 [4] ELBOW-PIPE  
22. 129-3078 C [4] VALVE AS-SHUTOFF (BURNER)  
23. 8C-6868 C [6] CONNECTOR  
24. 2T-2305 [2] ELBOW  
25. 6V-9850 [2] ELBOW  
26. 8I-0704 I [2] HOSE AS  
27. 8I-0705 I [1] HOSE AS  
28. 8I-0709 I [1] HOSE AS  
29. 6V-8994 [1] UNION (STRAIGHT)  
30. 6V-8980 [1] ELBOW  
31. 8S-7169 [2] COUPLING  
32. 8I-0706 I [1] HOSE AS  
33. 8I-0707 I [1] HOSE AS  
34. 003-8747 [2] ELBOW  
35. 8C-8988 [1] ELBOW  
36. 8M-2773 C [5] CLIP (LOOP)  
37. 6V-8918 [2] BOLT (5/16-18X1.25-IN)  
38. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
39. 6V-8189 [3] NUT (5/16-18-THD)  
40. 160-2244 BG SLEEVE-ABRASION  
41. 077-8184 C [8] CLAMP  
42. 3S-2093 [3] STRAP-CABLE  
43. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
44. 8T-4994 [3] WASHER-HARD (20X36.5X3.5-MM THK)  
45. 4M-6425 [1] BOLT (5/16-18X1-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP01090006
 

102-2703: ADJUSTER GP-HEIGHT

102-2703 ADJUSTER GP-HEIGHT -MANUAL
PART OF 8I-0257 ADJUSTER GP-HEIGHT
i00465645 KEBP0109
1022703 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-8316 [2] SETSCREW-SOCKET (10-32X2.54-IN)  
2. 163-5736 [1] SCREW-LIFTING  
3. 107-0247 [1] GEAR-WORM  
4. 3P-8680 [2] CUP-BEARING  
5. 187-5527 [1] HOUSING  
6. 107-0250 [1] GUIDE-BUSHING  
7. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
8. 163-5737 [1] PIPE  
9. 2D-6398 [2] RING-RETAINING  
10. 8L-4070 [2] BALL BEARING  
11. 7T-9831 [2] CONE-BEARING  
12. 112-2181 [1] WORM  
13. 142-6282 [1] CAP  
   
  8T-5069 F [4] SETSCREW-SOCKET (10-24X0.25-IN)  
  F   NOT SHOWN
 

#KEBP01090007
 

8I-0257: ADJUSTER GP-HEIGHT

8I-0257 ADJUSTER GP-HEIGHT -MANUAL
PART OF 8I-0403 SCREED AR
i00423720 KEBP0109
8I0257 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0258 [1] PLATE AS (RH)  
2. 8I-0259 [1] PLATE AS (LH)  
    (EACH PLATE AS INCLUDES)
  5E-9146 E CHANNEL (20-CM)  
  7T-1099 [1] LINK  
3. 8I-0273 [2] PLATE-BOTTOM  
4. 8T-9393 [18] BOLT (5/8-11X1.5-IN)  
5. 8T-4122 [18] WASHER-HARD (17X32X3.5-MM THK)  
6. 253-8866 [8] PIN-SPRING  
7. 5J-3941 [8] PIN-SPRING  
8. 8I-0261 [1] FRAME AS (RH)  
9. 8I-0262 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
  7T-1099 [2] LINK  
10. 8T-6871 [2] BOLT (5/8-11X2.5-IN)  
11. 1D-5118 [2] NUT-JAM (5/8-11-THD)  
12. 354-6744 [4] TUBE AS  
13. 8I-0256 [8] BUSHING  
14. 8I-0267 [4] CAP  
15. 4L-6454 [8] BOLT (3/8-16X1-IN)  
16. 8T-4896 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 107-6186 [2] GAUGE (EXTENDER INDICATOR)  
18. 9S-2544 [4] SCREW-HEX HEAD (8-32X11.13-MM)  
19. 8I-0272 [2] POINTER  
20. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
21. 102-2703 Y [2] ADJUSTER GP-HEIGHT (MANUAL)  
22. 5S-7383 [4] BOLT (3/8-16X1.75-IN)  
23. 6V-8801 [4] NUT (3/8-16-THD)  
24. 102-2733 [2] CLEVIS  
25. 253-9036 [2] NUT-JAM (1-1/4-12-THD)  
26. 102-2704 [2] BOLT-SPECIAL  
27. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
28. 6V-8189 [2] NUT (5/16-18-THD)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#KEBP01090008
 

8I-0732: ADJUSTER GP-HEIGHT

8I-0732 ADJUSTER GP-HEIGHT -MANUAL
AN ATTACHMENT
i00540771 KEBP0109
8I0732 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8177 [1] LOCKOUT  
2. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
3. 8I-0260 [2] WHEEL AS  
4. 8T-7566 [2] PIN-SPRING  
5. 102-2714 [2] HANDLE  
6. 8I-0279 [2] SHAFT-EXTENSION  
7. 8I-0923 [2] COUPLING  
8. 102-2739 [4] KEY-SQUARE  
9. 102-2701 [2] BEARING  
10. 8T-8908 [6] BOLT (1/4-20X1-IN)  
11. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 6V-8185 [4] NUT (1/4-20-THD)  
13. 276-2521 [1] MOUNT AS (RH)  
14. 8I-0286 [1] MOUNT AS (LH)  
15. 4L-6454 [4] BOLT (3/8-16X1-IN)  
16. 6V-8801 [4] NUT (3/8-16-THD)  
17. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
18. 5S-7349 [2] BOLT (1/4-20X0.5-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
 

#KEBP01090009
 

106-1490: ADJUSTER GP-STRIKE-OFF

106-1490 ADJUSTER GP-STRIKE-OFF
Type 1
AN ATTACHMENT
i00487532 KEBP0109
1061490 ADJUSTER GP-STRIKE-OFF Parts scheme
  For full view, you need register

Parts for your 10 FT ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-7348 Y [2] MOTOR GP-POWER ADJUSTER  
2. 4L-6454 [4] BOLT (3/8-16X1-IN)  
3. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 8I-0736 [2] SUPPORT AS-MOTOR  
5. 102-2739 [2] KEY-SQUARE  
6. 8I-0740 [2] COUPLING GP  
7. 7N-8008 [2] SWITCH AS-TOGGLE (RH/LH EXTENDER HEIGHT)  
    (EACH INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
8. 106-0525 [2] WIRE AS  
9. 105-8035 [4] WIRE AS  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  Y   SEPARATE ILLUSTRATION
 

Information:

Service Letter-NACD
Product Support Program For Reworking the 10-20B Extend-A-Mat® Screed Drop Arm Pins On Certain AP-1000 And AP-1050 Asphalt Pavers
Product Support Program For Reworking the 10-20B Extend-A-Mat® Screed Drop Arm Pins On Certain AP-1000 And AP-1050 Asphalt Pavers
Technical Information Bulletin
Screed Extender Support Bushings May Come Loose And Come Out Of The Frame
Screed Extender Support Bushings May Come Loose And Come Out Of The Frame
Service Magazine
High Speed Gearmotors Used On Extend-A-Mat® B Screeds Reduces Actuation Times{5640}
1993/12/06
Use Procedure To Adjust Screed Flatness And Extender Angle Of Attack{6643}
1994/08/15
Improved Screed Hoses {7554,5057}
1998/04/13
Addition Of Screed Deflectors {6643}
1998/09/07
Installation Replacement For Screed Extender Support Bushings {6641}
1998/10/05
Installation Replacement For Screed Extender Support Bushings {6641}
1999/01/25
New Actuator Motors Available for Power Screed Options {6640}
1999/02/15
New Screed Plates Are Now Available {6641}
1999/04/19

Caterpillar Parts SIS Catalog 10 FT :

BURNER GP
8I-0154 BURNER GP
BURNER GP
8I-0154 BURNER GP
LINES GP-BURNER
8I-0658 LINES GP-BURNER
LINES GP-BURNER
8I-0658 LINES GP-BURNER
ADJUSTER GP-HEIGHT
102-2703 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
8I-0257 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
8I-0732 ADJUSTER GP-HEIGHT
ADJUSTER GP-STRIKE-OFF
106-1490 ADJUSTER GP-STRIKE-OFF

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.